Differnt world with V8's, but for a lil more perspective.. My truck went 11.6 @115 NA and 10.21 @129 w/150 shot, 1.4- 60' time.
Its weighs in like 27x or something like that w/driver (200+ lb guy)

I also found this facinating....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Carcraft &raquo;</TD></TR><TR><TD CLASS="quote">We quickly hit the engine with a one-two punch of 100hp and then 200hp nitrous hits that the engine handled without a whimper. With the 200hp kit, our mighty Mouse was steamin' at 521 hp with 587 lb-ft of torque! Next, we hit it with 300hp and saw the power shoot up to 599 hp and 655 lb-ft of torque. When we re-baselined the normally aspirated combo, our little hero small-block stepped up with 325 hp, an increase of 15 hp over the previous baseline. We attributed this to better ring seal after the nitrous knocked the carbon off the rings! Now we were ready for the big squeeze!</TD></TR></TABLE>

Thats pretty cool.

 

hey all, ill be putting a 400shot on my motor in the next few days, its boosted to......... now everyone say Wizards of NOS.........

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by extralargenog &raquo;</TD></TR><TR><TD CLASS="quote">No way n hell 260 WHP is going 10.5s in any Honda chassis passing a tech inspection...


I call </TD></TR></TABLE>

well that is exactly what happend. its my car. what makes you think it cant pass tech. you should know since youve build a tube chassis drag car before right???

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by motoxx644 &raquo;</TD></TR><TR><TD CLASS="quote">

Its kinda up in the air at this point, If you have any suggestions on my build I am open to them</TD></TR></TABLE>

take the IROC out of the barn and demolish that instead

 

bulls***


Modified by boostedcivicsir at 6:33 PM 9/12/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RaceCarRyne &raquo;</TD></TR><TR><TD CLASS="quote">


well that is exactly what happend. its my car. what makes you think it cant pass tech. you should know since youve build a tube chassis drag car before right???</TD></TR></TABLE>

Post some pictures of the said car. Where in Indiana are you from? Haven't seen it around.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxmatt &raquo;</TD></TR><TR><TD CLASS="quote">

Post some pictures of the said car. Where in Indiana are you from? Haven't seen it around.</TD></TR></TABLE>

first off y would i tell you where im from. second who drives a tube chassis car on the street???? https://honda-tech.com/zerothread?id=2151624
there is the link and thats all you get..

 

and besides where are u from mr. nsx. adress????

 

it can be done if you know what your doing

 

thank you finally someone that isint gay on ht..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RaceCarRyne &raquo;</TD></TR><TR><TD CLASS="quote">

first off y would i tell you where im from. second who drives a tube chassis car on the street???? https://honda-tech.com/zerothread?id=2151624
there is the link and thats all you get..</TD></TR></TABLE>

Nice attitude smart ***. I know you don't drive it on the street, the tracks is where I haven't seen it and indiana is not that big in terms of compact cars is why I asked. Better lose the attitude big man.

 

For someone who talks as much s*** as you do... and builds chassis... Your welds look like crap. I remember that thread... Net setup.

So wheres the vids/slips any other proof besides car sitting on stands plum? I dont see **** about what you claim... Probably all we get as thats all there is.

you Fail





Modified by boostedcivicsir at 6:34 PM 9/12/2008

 

deff. can wait to see this come togeather.

 

motoxx644 whats gonna be your full setup and I will do what i can to help you make this happen

 

since u guys find it hard to believe our s**t does what it does, why dont me and ryne bring our s**t out and sit heads up w/ u guys and see who runs what. u guys think this is talking **** because you guys dont like drag racing so you put down those who have better built cars. our buddy was askin for simple advise on a big shot nitrous build and most of you have to post garbage to get your post count up. plain and simple.



Modified by boostedcivicsir at 6:35 PM 9/12/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Quarter Performance &raquo;</TD></TR><TR><TD CLASS="quote">since u guys find it hard to believe our s**t does what it does, why dont me and ryne bring our **** out and sit heads up w/ u guys and see who runs what. u guys think this is talking s**t because you guys dont like drag racing so you put down those who have better built cars. our buddy was askin for simple advise on a big shot nitrous build and most of you have to post garbage to get your post count up. plain and simple.</TD></TR></TABLE>

Great... another thugged out hardcore street racer without spell check.



Modified by boostedcivicsir at 6:36 PM 9/12/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RaceCarRyne &raquo;</TD></TR><TR><TD CLASS="quote">thank you finally someone that isint gay on ht.. </TD></TR></TABLE>

im on your side man, did you not see my post?

 

lol im definatly white man and not thug, sorry i didnt know this was a computer class where i had to spell check, you have to much time on your hands guy. enjoy the nsx.

 

Bring that pile of s**t out on the street here in the NW and get WALKED ON by a four door with full interior son.

Straight up.


Modified by boostedcivicsir at 6:36 PM 9/12/2008

 

my car is full interior also, and would love to come out and sit heads up w/ ur 4 door on the street. my car junk? lol 4 door ftw son! hahahahaha
where u located? im not scared of any 4 door w 640whp

STRAIGHT UP 4 DOOR SON


Modified by Quarter Performance at 3:37 PM 9/12/2008

 

[QUOTE=extralargenog]For someone who talks as much **** as you do... and builds chassis... Your welds look like crap. I remember that thread... Net setup.

where do i ever talk s***?? net setup???? no sence

welds look like crap?? what do you expect, a tig looking weld with a mig welder?? where are pics of ur welds. or better yet your RACE CAR??? it doesnt matter tho ull prolly just post up pics of stuff that isint even yours. ne wayz ill throw nitrous on my car just for s***s and giggles and race you for bragging rights?? u shouldnt be scared or a junk car with crappy welds it might fall appart on the line. besides there is NO WAY it could run a 10.8




Modified by boostedcivicsir at 6:37 PM 9/12/2008

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by extralargenog &raquo;</TD></TR><TR><TD CLASS="quote">Bring that pile of **** out on the street here in the NW and get WALKED ON by a four door with full interior son.

Straight up.</TD></TR></TABLE>

well since ur so confident why dont you come to us and race. since it will smoke our junk there should be no problem??

and as far as slips go i can post up any slip up and say it ran whatever i want it to proves nothing... as for video come out and video tape it and post it urself waste of time......

this thread is beat. motoxx644 will shoot 400 hp nitrous and then youll go crying home cause u wish u could

 

freak it 1000!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

hey extralargenog... pics??? slips??? come on..........

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RaceCarRyne &raquo;</TD></TR><TR><TD CLASS="quote">[QUOTE=extralargenog]For someone who talks as much **** as you do... and builds chassis... Your welds look like crap. I remember that thread... Net setup.

where do i ever talk ****?? net setup???? no sence

welds look like crap?? what do you expect, a tig looking weld with a mig welder?? where are pics of ur welds. or better yet your RACE CAR??? it doesnt matter tho ull prolly just post up pics of stuff that isint even yours. ne wayz ill throw nitrous on my car just for ***** and giggles and race you for bragging rights?? u shouldnt be scared or a junk car with crappy welds it might fall appart on the line. besides there is NO WAY it could run a 10.8

</TD></TR></TABLE>


There might be some confusion here... they are thinking there's no way it would run 10.8 in the 1/4... however, you are probably right to be defending your 10.8 in the 1/8th