sold

 

Complete CCC Racing Modified Light weight trailing arms setup for Eg civic or Integra.

Powder coated comes with:

solid spherical bushing kit
Omni power LCA
Toe and Camber adjustments

$800

 

Brand new set of Hasport egk1 mount kit. Never mounted only used as display. $450.00

shipped. Paypal only. Best way to get ahold of me would be txt 5593205710

 

RCI 5 Gallon Fuel Cell 2050D with foam and straps and misc 8an fittings. $75.00


Clutch Masters FX500 w/upgraded high rev pressure plate, used for one dyno session and 5 passes at the track. List price 415, asking $300.00


AEM Twin Fire unknown condition sold as is $50.00


H&R Sport Springs for DC integra - $100.00


BNIB Emgo Carburetor Balancer - $75.00


4 OBD2 LS valve covers - $40 each
GSR camshafts - $100.00
P75 ECU Converted to vtec, socketed wil work with deamon board or ostrich - $100.00
GSR power sterring pump, lines, rack & pinion - $100.00
Clutch Masters FX700 clutch discs for small spline transmission - $150.00

 

Juan Segovia



i have a AEM version 2 barely used. only used for dyno time- part#30-6060. i had it sent to AEM to verify everything is in working order. i have recipe from purchase, i paid almost $1400. im looking for $800 OBO for the ECU . call or text at 407-766-9123. this ECU will plug and play to the following cars( this ECU is perfect for Boosted hondas!!

This product fits the following vehicles:
•1997 to 1997 Acura CL 2.2L 4 Cyl
•1996 to 1999 Acura Integra GSR 1.8L
•1996 to 1999 Acura Integra GSR 1.8L
•1996 to 1999 Acura Integra RS, LS, GS 1.8L
•1996 to 1999 Acura Integra GSR 1.8L
•1996 to 1999 Acura Integra Type R 1.8L
•1996 to 1997 Honda Accord DX, LX, SE, EX 2.2L 4 Cyl
•1996 to 1998 Honda Civic CX, DX, LX 1.6L
•1996 to 1998 Honda Civic EX 1.6L VTEC
•1996 to 1997 Honda del Sol Si 1.6L SOHC VTEC
•1996 to 1997 Honda del Sol VTEC 1.6L DOHC VTEC
•1996 to 1997 Honda del Sol 1.6L SOHC VTEC
•1997 to 2000 Honda Prelude H22
•1996 to 1996 Honda Prelude H22
•1996 to 1996 Honda Prelude H23
•1996 to 2000 Honda Prelude H22
•1996 to 2000 Honda Prelude H22

 

EVERYTHING IS NEW NOTHING WAS BOUGHT USED.
First up.
LS Vtec long block.
Golden Eagle Block (85mm) $1000
Eagle Rods $300
CP Pistons $500 (85mm 9-1cr)
ACL Race Bearings $150
New Honda oil pump $150
New Honda water pump $80
ARP Main studs $150
APR head Studs $150
Block fully assembled @ InlinePro $1500

Fully built PortFlow B16 head
Fully ported and polished
5 angle valve job
Complete Supertech valve train w/ bronze valve guides
$1650

New Golden Eagle LS vtec kit installed. $250
Cometic head gasket $80
Moroso Oil Pan $150
There's a lot of money tied up into this motor. My loss is your gain.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
***********Complete long block $4500*************
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


T1 Race Development GT3 Intercooler $1425 new with a 2-4 week wait.
$800


JDM GSR S80 LSD Transmission Low Miles. MINT condition. $800


Brand New SRP Pistons 81.5 w/ new rings, wrist pin locks, etc. 10-1cr, Eagle H-Beam rods w/ NEW ARP 2000 rod bolts, Brand New 89mm LS Crank Shaft never been used. $800

 

The only reason this is not a complete turbo setup is because i am NOT including wastegate and bov. This setup made 400 on my bone stock gsr on 10lbs. Only reason im selling is because im upgrading. Email for fastest response mmilian85@yahoo.com. Parts have less than a thousand miles on them since ive been deployed most of the time.




-Precision 6262 T3 journal bearing .82 A/R. $800
-Custom Treadstone core with single back door $350
-2.5" Intercooler piping with all couplers and t-bolts(not polished) $250
-AEM fuel rail $100
-Edlebrock Victor X Gsr manifold (bare no sensors) $280
-3" Vband Downpipe with bung for wide band $200
-Wastegate dump tube $50

 

1996 EK hatchback with 10 pt. certified cage. Will come with title. **Shell Only**

**FULL BLOWN LOGOS WILL BE PULLED BEFORE SALE**

Hand made 3 piece wide front end. Fenders are metal, bumper is fiberglass. Will also come with carbon fiber hood with aero catch latches.

Car comes as stripped down shell with GC drag launch springs and tokico illumina struts, on steelies.


This is what the car looked like when complete.







This is what is for sale, and will be on steelies. Front end not pictured, but IS included.








Slicks will not be included, but this is how the interior will be for this sale.







$4,000 FIRM, picked up at the shop. Serious buyers please send PM.

 

cp pistons 83mm 9-1 comp 3 used 1 new brand new rings comes with all c clips and wrist pins $320 shipped any were is the u.s paypal only you pay paypal fees!!!!text me or call me at (617)285-8199

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

 

Jonathan Hedrick

336-479-2404-text only

BRMS forward facing B series manifold, twin scroll, twin 44mm flanges,only bolted on-$700

 

cleaning up a bit...
all parts were utilized during the 2012 race season and were just recently removed from the cars.
Text with question for quickest response: 253-376-9083

2000cc Five-O fuel injectors (20 hits on them) $380.00 SOLD
2000cc ID injectors $600.00 SOLD
Blox 70mm Throttle body $140
ASP hood exit K series header (ceramic coated grey) $981.00
Innovate gauge package (4 individual gauges) $380.00 SOLD
Innovate MTX-L Wide band Gauge (black on black)
Innovate MTX-D Vacuum/Boost/Shift light (black on black)
Innovate MTX-D Oil pressure/Temp (black on black)
Innovate MTX-D Water temp/Volts (black on black)
AEM v2 K-series $800.00
K-series BME Aluminum rods (brand new) $595.00
B-series BME Aluminum rods, LS length 827 wrist pin (10 hits) $500.00
M&H 25"x8.75" slicks (used) 60% $150.00 SOLD
MSD Ignition Slew Rate Box, MSD Power Grid Ignitin Box, MSD Can Bus Adpater, Racepak Magnetic Pickup and Custom Mid Shaft Adapter - $900
MSD small shift light - $50
Custom SF EK B Series engine harness - $250
SI rear spoiler $120
B16 port flow cylinder head, heads been completely gone through, valve job, valve seats have been cut, combustion chambers have been opened to 84mm. Like new $1,000 (can sell with brand new oem sized valves that have been lapped to the cylinder head at the machine shop.)



ASP hood exit K series header (ceramic coated grey) $981.00
image illustrates grey ceramic coating

header prior to be ceramic coated


Innovate gauge package (4 individual gauges) $380.00
Innovate MTX-L Wide band Gauge (black on black)
Innovate MTX-D Vacuum/Boost/Shift light (black on black)
this is an advertisment photoht (black on black)
Innovate MTX-D Oil pressure/Temp (black on black)
Innovate MTX-D Water temp/Volts (black on black)


AEM v2 K-series $800.00



K-series BME Aluminum rods (brand new) $595.00



B-series BME Aluminum rods, LS length 827 wrist pin (10 hits) $500.00



all shipping will need to be covered be the buyer, all items should be able to ship with in 24hrs of payment.

preferred method of payment: PayPal

 

SOLD

 

Some things for sale that needs to go....best contact 203-947-1505

Blox 76mm throttle body with vband. No map sensor port $150


Professional products 68mm throttle body $150


Custom switch panel for radio location on dc2. $100


5" tach w/shiftlight $100


Standalone shift light $50


Corbeou race seat $300


Halman pro boost controller $80


Victor x intake manifold for b16 $250

 

Selling 3 downpipes. The first one was used with Full-Race T3 top mount manifold. The rest were used with a Full-Race T4 twinscroll top mount manifold.

3-4" downpipe with GT 4-bolt turbo flange and 4" V-band outlet flange (Used with GT35R).....$200

3-4" downpipe with 3" V-band turbo flange and 4" V-band outlet flange (Used with T4/T67).....$200

4" downpipe with 4" V-band turbo flange and no outlet flange (Used with BW S400SX, ceramic coated black)....$250



JG/Edelbrock GSR intake manifold polished with secondary fuel injector rail. Edelbrock part # 47611. Includes Skunk2 composite fuel rail, secondary fuel rail, BLOX 77mm billet throttle body with TPS with 3" vanjen flange welded on, throttle cable bracket and throttle cable. $750

 

H22 oil catch cam set up it will come valve cover with 16an lines and a 10an draing $300 ship

 

SOLD!!

 

hey whats going on looking to sell a bseries fullrace ramhorn it a t3 dual 44 gate manifold the extra gate was added and works perfect manifold has been ceramic coated black looking to get 600 obo shipping is extra any questions pm or text me 2402161030 thanks

 

B series skunk2 pro 3 cams. Have always been stored standing up lightly coated in oil. As you can see in the pictures they are hand engraved P3+ and also have the S2 stamp.

PM if your interested
Asking 475 shipped









AEM Tru Boost Gauge/Controller. solenoid, harness (Not pictured), and gauge controller.
asking 225 shipped

 

Near new condtion powder coated car hauler (less than 2000mi). Tires and brakes are in excellent shape, aand is stored in a climate controlled shop so there is no rust. There is a lockable 8x2x3 powder coated cargo box on the front of the trailer for storage. Very sleek and low design with long gentle beavertail makes loading low ground clearance race cars a breeze. Ramps slide out from under the deck, no lifting or straining required! Located in Central OH - $2750 You can email me directly fred (at) crxmotorsports (dot) com.

 

92-93 B-series cable Trans
1st to 3rd gear is from a 2000 civic si
4th gear is from a GSR trans (purchased new)
5th ( Phantom grip 5th delete ) I still have the si 4th,5th gear and ring and pinion that can go with trans
Pro Drive 4.7 ring and pinion
Rob Moore Spool

Trans and extra parts - $900 plus shipping

Clutch Master stage 5 part # 08-913-HDB4 ( new in box ) - $250 plus shipping

 

K-Series big power Turbo Kit


*second picture was taken before powder coating.
This turbo kit has already made Mid-900 hp on this car.
Kit includes:
RaceLAB custom Sidewinder Manifold (Black Ceramic Coating)
Precision 6768 Turbo with Ported H-Cover (black ceramic coated exhaust housing)
TiAL Q Blow off valve (black)
Tial V60 60mm wastegate (black)
3.5" Downpipe
2.5" dumptube
950hp Garrett Core intercooler with cast ATP End tanks
AFI Center fed intake manifold (coated black) with Wilson 75mm Throttle body
3" intercooler piping using Wiggins style clamps on all joints (coated black with black clamps)
[B]


Certain parts are available separately. Pm me with questions


The manifold/downpipe setup will work on most K series swapped civics or integras. I was originally made on an EK civic using EKK2 mounts with factory brake lines and brake booster. The intercooler setup obviously would only fit other EK's using a k20 and EKK2 hasport mounts.

Price: $4400 OBO

To contact us

email at Racelab@att.net /pm me here/ call our shop at 305-251-1995 during business hours.

 

FS: Full Blown Dual Pump Hanger Kit. Purple Anodized. SOLD
FS: DEATSCHWERKS DW300 320L pumps with filters. SOLD

 

Location: Camas WA
paypal verified
j.san-Juan@students.clark.edu

I no longer need these spare parts. No trades wanted at this time. Cash only

03 AP1 Differential Assembly 450 shipped
-little over 66k miles.
-no noise, lsd functioning properly
-comes with all mounts

 

A2W setup Bell intercooler core, water box that fits in EK engine bay with internal Rule water pump and -20 lines. It is already coated with an anti-condensation coating that way it does not sweat. $600.00

 

Full race turbo kit t4 win scroll top mount with Garrett t4 turbo 3" down pipe spearco intercooler intercooler piping greddy bov tial waste gates 3000 Obo text 7023322153