SFWD/true street/outlaw Integra shell forsale

Located in Pennsylvania, 30 minutes north of philly

-jojo jdm 3 piece front end
-carbon fiber hood & carbon fiber trunk (paint matched)
-10 point chromoly cage with window net, and parachute mount

*shell does not include any engine/trans/driveline/electronics/fuel system/seat/parachute/race suspension or wheels

will be rolling on oem stock suspension and steelies.

 

93 CX civic hatch race shell
fresh 00 civic si blue paintjob
flawless body no dents
great condition full interior
cert. 8 point cage
custom fiberglass dash with autometer gauges installed,tach,boost,oil pres.,water temp
parachute mount
parachute lever and cable installed
full omni power drag coilovers
golden eagle rear diffuser
custom lower control arms
new oem fuel tank sumped with 2 outlet bungs
full race traction bar
exospeed 3 piece widebody front end-*SOLD*
Weld Magnum gold face chrome lip front rims with slicks, few passes-*SOLD*
draglight rear skinnies with new tread-*SOLD*
shell as is on stealies $2500 OBO











- brand new in box Full-Race Twin Scroll Top Mount ProAM Turbo Manifold
1600 deg. black coating
comes with hardware and both exhaust gasket and turbo gasket
$1200

[IMG][/IMG]

-BNIB black Tial 50mm q edition BOV
$240 ***SOLD***

- 2 mint chrome Tial 044 wastegates
$200 each ****SOLD*****

-BNIB B series Aeromotive fuel rail
$170

[IMG][/IMG]

-mint BMC 6L intake manifold with matched 90mm Accufab throttle body attached
throttle body comes with TPS sensor
$1200

[IMG][/IMG]

-BNIB Borg Warner S400SX Billet 67mm
1.25 turbine housing
1600 black deg coating
$1600

[IMG][/IMG]

-BNIB Mishimoto half size 92-00 civic radiator
$180

[IMG][/IMG]

-WILLING TO TRADE FOR COMPLETE K SERIES SWAP KIT/PARTS FOR EG CIVIC

for more pics and info my cell is 336 575 0563
more pics of parts coming soon
***im currently located in TN***

 

Tilton twin disk not sure how many pass or how long it was used. $1000 obo

 

S2000 PPG GEARSET--$4700 shipped O.B.O.
http://www.s2ki.com/s2000/topic/1003851-ppg-gears/

 

PPG H series dog box, Quaife LSD, CC twin disc, and case for $5000.
I just opened the case and it still had redline lightweight gear oil on it.... That's why it's green (for the ones who don't know.)











Complete H series engine, assembled, turbo, and ready to go.
Cp carillo
Ferrea
Pro 1
S400 72mm
Freshly built, ready to go....
Will part out, but prefer to sell it all.
$4000

 

SOLD

 

F.A.S.T xfi unit1- 900 FIRM

p72 -80

**Prices do not include the cost of shipping

 

Parting out some race parts!
Aem 1000 ECU ver1 92-95 civic/integra setup to run T1 trigger sensor $650.
Aem twin fire with Cbr coils and harness $300
Hasport mounts rear one still on car $300
T1 trigger sensor with one gear $350
BWR Twin scroll B series manifold with dual 44mm flanges $550.00
AFI Twin scroll forward facing manifold with 60mm wastegate flange brand new! $750.00

Some pricing i can work with, some i will not..

 

Getting out of the drag scene. Turbo is in perfect condition, like new, only 10 hits on it. Price reduced now asking $2000 shipped!!! Call or text me at 661-547-9889 if interested.

 

Recently parted the shop drag car. Only things left:

- GT42/72R with Billet wheel. $1600
- FBM topmount manifold with dual v-band WG's, v-band DP, and dual dumps. $900
- FBM backdoor IC. $600
- Speedfactory upgraded gear shift assembly with soft spring for gforce gearset. **SOLD**
- 26" Weld (powdercoated centers) with 26x10 MT tires, and matching skinnies. $2000 + paypal fees & shippping. (10 dyno/8 runs on slicks)

Also have 13" matching Weld fronts w/MH 24.5x8 tires. First front Weld 15 or 13 set will need matching skinnies bought for 2K. Will not separate. Alternate fronts will be sold after the fact.


PM us here for info. Thanks.

 

Liberty 4.7 final drive for sale 15-20 passes on it $800+shipping

 

SOLD

 

Complete b-series EG Hasport motor mounts for sale. The two side mounts were only used for one season and are U94A and the rear mount has a few more seasons on it and is solid.

Located in Eugene, OR and I accept Paypal.

325 Shipped

 

5 Gallon Plastic Rci Fuel Cell with brackets $50

Ls Crank already balanced just needs to be micro polished $100

Exospeed Vpd fronts and Xpd rears in polished color. 13x8 front and rears 15x4 $850 with out slicks.

$ 1600 WITH SLICKS down there brand new have 12 passes on them 23" slicks and 15x22x4 skinnies. CALL 267-266-3592 FOR PICS LOCATED IN PHILLY THANKS GUYS

 

so

 

FOR FASTER SERVICE CALL OR TEXT (360)632-9972

Crower Turbo Cams $350

Golden eagle sandwich adapter $80

Eagle rod $300

Cp 84.5 pistons $350

RS Machine open deck sleeved block. $800

RS Machine fully built B16 head $1300

Toda B cams $450


Pro Drive Spool $300

water box 16x12x10 with -16 fittings $200

MSD Pro coil $40

Earls 19 row oil cooler $130

RCI seat belts blue $75 for both

Password JDM LS intake Gasket New $25

Sparco 2" seat belt blue $40

3” I/C piping $150

XS Engineering I/C $200


B series axles $80 each

B series linkage $75

Koyo Radiator $170

Unorthodox racing crank pulley $75

Buddy Club cam gears $100

Fully built B20/w port flow head $2600

JG Edelbrock B16 manifold $250

OEM B series distributor $120

MSD Blaster SS $30

EK solid mounts $280

AEM ECU OBD1 $700


Pauter LS Rods $750
Golden eagle sandwich adapter $80
MSD Digital-6 $240

Supertech Valves 1 mm over intake .5 mm over on exhaust $150
Toda Springs and retainers $250

Greddy Timing Belt $80

Simpson Drivers suit used one time $150


Simpson Drivers Gloves used once $100

 

Weldon 2035 pump

$560 shipped

 

FS: Full-Race t4 Top-mount Manifold (dual 38mm WG setup) - $825OBO + Shipping

 

Davila's H22 full build part out. BUYER WILL PAY FOR ALL SHIPPING. NO TRADES
Going H2B everything must go and doing a whole new turbo setup
Borg Warner S259 70 AR upgraded billett wheels $600.00





Intercooler piping with Samco couplers and V-band clamps Ment for H22 in a EK does not include bov no leaks paid 600.00 for this to be welded up they bling when cleaned I will clean the burnt rubber off before shipped $250.00


Down pipe, waste gate up pipe, and turbo manifold flanged for a 60 mill wastegate (waste gate not included) WILL NOT PIECE OUT MUST BE SOLD AS A KIT. I can't remember who the maker is but I paid $700.00 for the mani alone. The 3" down pipe was custom made and has a flex pipe built in. $800.00





Hasport Motor mounts Ment for H in a EK $200.00



H22 MID SHAFT $40.00


Rear bracket for H in EK $40.00


H-SERIES BUNGED FOR TURBO LIKE BRAND NEW $75.00


SKUNK 2 70MM THROTTLE BODY USED FOR TWO TRACK DAYS $200.00


H22 TRANNY HOUSINGS (I HAVE TWO) $100.00 EACH

3" FULL CUSTOM EXHAUST FOR EK COUPE $300.00

MF FACTORY H22 LSD LIKE NEW $450.00

H22 SHIFTER $50.00
2 SETS OF H22 SHIFTER CABLES $75.00 EACH

H22 STARTER $50.00

HOW THE SETUP LOOKED IN MY CAR

 

FS: AEBS sleeved k20 block

Comes with crank, pistons and rods
-OEM crank
-Aeroprecision rods
-Ross pistons ~9.0 c/r. One of them is eaten up a little on the groove of the valve. The other pistons should be salvageable. Pistons do not increase price of sale, you can keep them or i can remove them for no extra charge.

I bought the short block from a friend's buddy who was parting out his car. I was going to keep it for my turbo setup but I need to free up some CC bills.


Asking $1,100 shipped for the whole short block. it's gonna cost around $100-$125 to ship.

PM or contact me at 405-623-8333
-Bryson.










Engine is at the machine shop, if you require any additional photos LMK

 

GM 3 BAR MAP SENSOR (USED)= $30
GM 4 BAR MAP SENSOR (USED)= $30
HONDATA 4 BAR MAP SENSOR BRAND NEW= $90
HONDATA S300 V2 BRAND NEW IN BOX= $400
BLACKWORKS RACING CAM GEARS BRAND NEW= $150



FS: 95 Civic DX Coupe Rolling Shell
Skunk2 Full Coilovers
Stell Braided Brake Lines
Brand New Brembo Slotted Front Rotors With Hawk Pads
Omni Rear LCAs
Del Sol Wheels
6 Point Roll Bar With Full Black Interior
Shift Linkage and Mounts Included
Battery Relocated to Trunk With Cut Off Switch
No Cancer
$2200 LOCAL PICKUP ONLY







ALL PRICES DO NOT INCLUDE SHIPPING, LOCATED IN MILLERSVILLE, MD
PM OR CALL

THANKS!

 

Massive clear out in Denver Colorado. Everything is O.B.O. plus shipping but I would prefer to sell quickly so shoot me any offers. I can only say no or counter offer. Shoot me a pm or email me at DynoMikeTuning@Gmail.com. Quick hint (if you don't know) pressing Ctrl + F will search the page for whatever you want.

$225 - M/T Skinnys (ET Front) 22.5 x 4.5 x 15 Wheels not included, but I may field offers.
$350 - JDM Integra Type R Header - Upper and lower, great shape. Needed for the nice JDM Exhausts on DC5's like J's. Very hard to find.
$50 - B Series Fast Idle Thermo Valve - New
$125 - Chipped PR4 ECU - Comes with fresh chip
$45 - PND 50 Degree Cam Gear - Low Miles
$60 Each - 95 Integra Air Bags -Um, un-exploded? Can't Ship.
$20 Each - Boost Gauge, Air/Fuel Gauge - Boost gauge is new, A/F gauge is used
$100 - Pyrometer - Fresh sending unit slightly used.
$40 - Boost Gauge - Used
$50 - Electric Oil Pressure Gauge - Never used.
$120 - Civic SI gauge Cluster - 90-91 158k miles Good shape, no scratches.
$175 - MOMO Trek Steering Wheel - Used, good condition. You know the Gumpert Apollo uses these? Weird.
$30 (SOLD!)- JDM Integra TYPE-R Handle Cover - Used only shortly
$175 - Innovate LM-1 - Wideband O2 sensor kit. Awesome unit for tuners.
$150 - AVCR Boost Controller - Used for a little while. Boost by gear, boost by time, etc.. Sweet unit.
$150 - Kirkey Race Seat - Super light. Seat, mounts, and bracket assembly weigh 19 lbs together. Fits EG/DC/etc... will part out.
$325 - M&H Slicks 23x8x13 - As new as possible. Only warmed up twice (never run, we broke off the line both times lol) Kept deflated and wrapped with the rest of my tires in my houses 'Tire Room'. Wheels not included, shoot me offers.
$1900 - SnapOn Welder - Low hours. TIG attachment, Aluminum MIG Spool Gun Included! New this setup goes for almost $5000. Awesome all purpose machine. Can't ship, sorry, it's just too heavy.
$575 - 5 Speed Transmission - 38k Miles, Great shape, no grinds! Prefer Local Pickup.
$40 -Coolant/Water Temp gauge - Brand new
$225 (SOLD!) - Hybrid Racing K-Swap Mounts - O.G. stuff here. I've personally fully polished all of the aluminum. Very clean kit.
$60 - Type R Manifold Cover - Brand new.
$200 Each - Aeromotive A1000(SOLD!)/Paxton Racing pump - Both used. Very low hours on each. The Aeromotive was sold to me as a first gen Eliminator. It may be, which means a hell of a deal. But I'm just not sure. Good stuff.
$50 - Rear LCA's - Not sure on the make. Good condition, used.
$150 (SOLD!) - Koni Yellow Front - EG/DC/etc.. Used for around 800 miles. Very, very fresh. (pending)
$220 (SOLD!) - Tial Blow Off Valve - (BOV) Brand new
$300 Each $550 for both - Tial 44mm Wastegates- Brand new, Just opened for pics. All hardware included.

$1250 - Full Race Turbo Manifold - T4 Divided Housing(Twin Scroll) Brand new. Baddest manifold in the business. Dual 44mm waste gates.








$300 Each $550 for both - Tial 44mm Wastegates- Brand new, Just opened for pics. All hardware included.








$220 - Tial Blow Off Valve - (BOV) Brand new




$150 - Koni Yellow Front - EG/DC/etc.. Used for around 800 miles. Very, very fresh.


$50 - Rear LCA's - Not sure on the make. Good condition, used.


$200 Each - Aeromotive A1000/Paxton Racing pump - Both used. Very low hours on each. The Aeromotive was sold to me as a first gen Eliminator. It may be, which means a hell of a deal. But I'm just not sure. Good stuff.


$60 - Type R Manifold Cover - Brand new.


$225 (SOLD!) - Hybrid Racing K-Swap Mounts - O.G. stuff here. I've personally fully polished all of the aluminum. Very clean kit.


For Comparisons sake


$40 -Coolant/Water Temp gauge - Brand new


$575 - 5 Speed Transmission - 38k Miles, Great shape, no grinds! Prefer Local Pickup.






$1900 - SnapOn Welder - Low hours. TIG attachment, Aluminum MIG Spool Gun Included! New this setup goes for almost $5000. Awesome all purpose machine. Can't ship, sorry, it's just too heavy.








$325 - M&H Slicks 23x8x13 - As new as possible. Only warmed up twice (never run, we broke off the line both times lol) Kept deflated and wrapped with the rest of my tires in my houses 'Tire Room'.






$150 - Kirkey Race Seat - Super light. Seat, mounts, and bracket assembly weigh 19 lbs together. Fits EG/DC/etc... will part out.






$150 - AVCR Boost Controller - Used for a little while. Boost by gear, boost by time, etc.. Sweet unit.


$175 - Innovate LM-1 - Wideband O2 sensor kit. Awesome unit for tuners.


$30 - JDM Integra TYPE-R Handle Cover - Used only shortly


$175 - MOMO Trek Steering Wheel - Used, good condition. You know the Gumpert Apollo uses these? Weird.


$120 - Civic SI gauge Cluster - 90-91 158k miles Good shape, no scratches.


$50 - Electric Oil Pressure Gauge - Never used.


$40 - Boost Gauge - Used


$100 - Pyrometer - Fresh sending unit slightly used.


$20 Each - Boost Gauge, Air/Fuel Gauge - Boost gauge is new, A/F gauge is used


$60 Each - 95 Integra Air Bags -Um, un-exploded? Can't Ship.


$45 - PND 50 Degree Cam Gear - Low Miles


$125 - Chipped PR4 ECU - Comes with fresh chip




$50 - B Series Fast Idle Thermo Valve - New


$350 - JDM Integra Type R Header - Upper and lower, great shape. Needed for the nice JDM Exhausts on DC5's like J's. Very hard to find.





$225 - M/T Skinnys (ET Front) 22.5 x 4.5 x 15

 

SOLD

 

I'm selling my Garrett Gt4294r 1.15 a/r turbo. This is the ball bearing one. There is nothing wrong with it at all. I always ran an oil restrictor and coolant through it. It has a polished compressor housing (has some scratching) with a 90* and hargett clamp welded on. I will also include the male end off of my charge pipe. Turbine is ceramic coat too. I can include the v-band and cut the flange from my downpipe, if wanted. I'll also leave the oil flanges and water fittings on.
I ran this on a 2l k-series drag car and it spooled with no problem. The only reason I took it off of the car is to change the trans and decided I wanted to play in the 62mm class now. I'm asking $1000.00 obo or if you have a T4 6266 maybe we can make a deal.

 

Precision 1200cc injectors less than 50 miles on them, they are low impedance and require a resistor box, ended up going a different route , $200 obo shipped

Pm or text if interested and for pics, (361-249-8926)
and i ship out as soon as payed, no delay