crazes

Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

hondaracing84

iTrader: (1)

Prices are firm but may entertain offers if not low balled. Shipping NOT included in prices. Add 3% for PayPal.
You can PM me or for faster response text. 580-382-1661
Please read descriptions of parts fully.
Serious inquiries only.

Adding a few things to sell. Decided to go a different route and need these sold to fund it.

Big B Series All Motor roller cams and ferrea roller rockers. These cams have made 335hp on a 98mm stroke B series. I made 270 on an 89mm stroke. Cams alone were 1600 and rockers and just under 1k. Message me for specs, serious inquiries only. Im selling them together for $1500.

Drive Shaft Shop B series 5.9 axles. These were ran for 2 dyno sessions and 3 races. Just a handful of passes on them. I have hubs that are currently installed in the knuckles. I can have them removed and send them too if you need them. Otherwise I can sell the axles only. - $1200

Skunk2 90mm Pro series Throttle Body. Used for 2 seasons. TB is in great shape, gasket is used but still usable. Uses factory TPS - $225

Complete Supertech valve train. Brand new in the box 85lbs turbo/all motor springs. Used titanium retainers 1 brand new. Used 100 series flat faced high compression valves (has the supertech logo on the stem). 4 used intake 4 brand new, 4 used exhaust 4 brand new. Supertech keepers. May sell separate, see below. Otherwise will sell together discounted for $470
85lbs springs - 150
Retainers w/supertech keepers- 140
Valves - 190

boostbandit

BNIB AEM V2 OBDII - $1100


BNIB Injector Dynamic ID2000 - $850

BNIB T1 trigger kit - $500


Only used parts I have and would like to sell as a whole.
Full race ram horn manifold custom turbo kit, comes with everything
anybody would need to have a complete kit with up pipe and tube.
Intake Manifold also has BDL 72mm throttle body. All for $1900












832-875-1213

98B18C1

iTrader: (1)

Came off my perfect running motor without any issues. Building a SFWD car so upgraded my valvetrain to Ferrea.
The GSR head it came off of was completely done by Portflow.
Comes with:
Dual Valvesprings
Titanium Retainers
Intake and exhaust valves
Keepers

430 shipped priority...will not part out unless I have a buyer for everything

civic-steve-94

Hello honda tech here to try and sell some stuff.
All prices are with out shipping or paypal fees.

I live in Blythe,CA so shipping to east coast can be spendy.
I use UPS also.

Shoot me offers and for questions.
contact me either here or via text message (760-984-4210)



GO-Autoworks A/C compatible 2.5 in down pipe with 3in exit has 2 o2 sensor bungs, Go-Autoworks cast manifold, and Turbonetics T3/T04 brand new turbo. i would like to sell these altogether. All these parts are brand new and have only been mocked up.-$750





Fuel injector clinic 775CC injectors with pigtails. Brand new never been used
-$250





AEM adjustable fuel pressure regulator for honda fuel rail. Brand new never been used.-$100




AEM Honda b-series high volume fuel rail never been used -$100




Turbo XS dual stage boost controller brand new never been used.-$100





Older used Tial 38mm wastegate with 7psi spring in it.-$100





Older used HKS adjustable BOV-$75





Used Blox racing 0-100 psi liquid filled fuel pressure gauge-$25





38mm mvs to 38mm flange adapter new-$25





38mm mvs stainless dump tube.-$30





Random CX-Racing turbo manifold-$75

NAVY AWS

B Series Albins Dogbox with Mfactory Diff. Parts have 6 passes on them and dyno time. PAYPAL FEES NOT INCLUDED IN PRICE.
Gear Ratio:
3.0
2.0
1.39
1.09
4.4 Final Drive
$5,300 text 75781829one7

Almtrhb

iTrader: (3)

**SOLD** SOLD** SOLD**
Albins B series Dog box FORSALE: $$ 5,100 $$ Does NOT include shipping or Paypal fees.
7 hits on new Input shaft and 1st gear, around 14 hits on Main shaft and Final drive. Have Spare (2) 3/4th slider and (2) 3/4th dog rings which can be flipped for double the life. Parts are used. Parts were purchased from SpeedFactory Contact for more info 714-388-7303
Will NOT ship out of the country.

GearSet ONLY... No billet case and NO diff

Gear Ratio:
3.0
2.0
1.39
1.09
4.09 Final Drive
Went 8.8 @178mph on this box used both 24.5 and 25 M&H slicks..

DKPR87

SOLD

Luserkid

Selling my custom made catch can/overflow tank. Sits behind the pass headlight of a 92-95 Civic (don't know about 96-00 Civic/Integra but don't see why not) . Valve cover has 2 -10 fittings welded on. Catch can has 1 -10 fitting with 1 filter. Overflow has a 1/8npt that you could fit your own fitting to. Line included. Asking $300obo plus shipping/paypal for both. Will sell separate if interested. Located in So Cal. Pm me for best response.

jdm knight

For sale a used Garrett gtx 67mm 1.15 a/r. Mint condition made over 900hp and just went 9.0 at 167mpg with this turbo. $1800 + shipping +PayPal fees. Located in va. For more info call or text 5712466897

DxTrix

Crx race car. Has a b series allmotor setup made 270hp. Motor setup is a lsv 86mm bore port flow race port head with a B16 face plated gear set. Full Lexan, mb fiberglass doors front end hatch and trunk, aluminum dash and straight axle rear suspension. If u want more details message me. $8500 firm or trade for a shell and $7500 firm located in Ca

flycivicsi

iTrader: (5)

*Please Read Whole AD*
1) I will not part out any of the packages do not PM me asking to sell you 1 rim/tire. If they are posted together in a package with a total price they will NOT be separated.
2) The prices are firm if you do not like them please do not PM me, if you offer less then my asking price I will not respond.

I have bought and sold lots on here so buy with confidence. I can provide numerous vouches if you require. All prices are shipped and in US dollars you must pay paypal or send as a gift. I am located in Canada but do not let this stop you from buying. Do not bother lowballing me I will completely ignore them. If you don't like the prices feel free to buy elsewhere.

Text or pm 306 551 5139



- K20/K24 Inline pro Fully built motor - Purchased from Jr Hurley himself. Built by inline pro. $5000 USD Shipped anywhere in canada. The US will be extra for shipping WILL NOT TAKE IT APART
22006 Acura RSX Type S - K24 Drag Build
specs
InlinePro Race K24 block
K20 head
InlinePro billet crank
InlinePro main studs
InlinePro head studs
ACL Race bearings
CP Pistons
InlinePro connecting rods
InlinePro custom billet cams
InlinePro Stage 4 head package
InlinePro oversized stainless steel intake valves
InlinePro Inconel exhaust valves
InlinePro bronze valveguides
InlinePro machined rockers
InlinePro valvesprings
Supertech valves
InlinePro closed-deck sleeves
InlinePro cylinder O-rings
InlinePro notched block

- Turbosmart 60mm Wastegagte BNIB - SOLD

- G-force Long series K series complete Shifter(used but not a lot)- $850 shipped

- Weldon Fuel Filter new - $80 shipped

- Weldon FPR - $200 shipped

- BNIB Precision Dual Ball bearing 67mm GEN2 Turbo- $2800 shipped

- 8 ID1000's (used but in great working order) - sold

- K-tuned 90mm new only mounted TB does not come with with flange as I had planned to order a new one - Sold

- k series Sheepey Built brand new never mounted or used Manifold(t4 single scroll) Up pipe(4") and Up tube - $1250 shipped

-K series DSS 5.9 axles spindles and hubs. Purchased used from CLM motorsports - sold

- AEM V2 EMS for k series swap - sold

- K series Comp Twin disk(used on the street for a short period) - $750 shipped throwout bearing included but not pictured

- ALL in Fab centre feed K series Manifold with 90mm opening, 8 Injectors New only mounted - Sold

-FCS 7 Gallon Fuel cell new never used - $700 shipped

- 800+hp Fuel System(off EG coupe) - $700 shipped
- Dual Bosch 044's
-8an Feed/Return braided line
-Fuel Filters
-JW Fab 5 gallon Fuel cell
-$800 shipped the Aeromotive FPR

- BNIB Hybrid racing performance z3 shift cables - Sold

- K-Tuned Traction Bar BNIB for eg- $300 shipped

- Hybrid racing AC/PW steering Delete kit - sold

- Precision GT4294(71mm turbo rated between 500-800HP) T04 Twin Scroll, AR.98, 4" band outlet- Minor chip on 1 fin. This turbo was used but very little only some dyne time and a few passes at 500hp. - $550 shipped

- Eg With B series front mount 900hp Garrett Core 3" in and out with 3" aluminum piping (dent on the outlet flange of front mount from shipping and piping) - $400 shipped

- j's racing e.g. front lip fiber glass painted red -$250

- EG CF Hatch complete with tail lights only mounted - 350 shipped

-APR CF Mirrors for eg (needs to be re cleared) - $150 shipped

- 1 RCI Harness expired believe in 2010 - $50 shipped

- Chase Bays B series tucked clutch line kit BNIB - $50 shipped

Motor


Wastegate


GForce


Weldon


FPR


Precision





id


90mm


Sheepey




DSS


AEM



Twin disk


ALL in



CF Hatch


Clutch line




Fuel System






Precision gt4294



APR Mirrors

ninesecrx

I am selling this complete running 1988Honda crx drag race car. It has lots of mods, fully built engine anda bunch of high end parts. Car will need to be tuned before raced.Engine was built to run on nitrous or turbo. Should still run hard ifran all motor if you like. ***$7,000*** OBO
12 point cage
tin work
Autometer tach and gauges
Painless switch panel
cnc stage brake
simpson cam lock 5 point harness andwindow net
full lexan windows with fast releasedzuz fasteners
straight rear single axle with torsionbar
Mugen body kit shaved in with greatcondition paint
Jazz race seat
MB fiberglass 1 piece front end
comes with a set of front racing slicks
1 gallon Jazz fuel cell
breather box
msd 6al ignition with blaster 2 coil
scatter shield for transmission
race clutch with aluminum flywheel
steel braided lines all over
B series motor mounts for swap
energy suspension bushings through out
bosch fuel pump
tokico 5 way struts
DC header
Skunk2 intake manifold
aem intake
magnacor spark plug wires
Neuspeed front strut tower bar
BDL throttle body
SX fuel filter and fuel pressureregulator
vortech fuel rail and fuel injectors
obd1 wiring
RC cam gears
Head has been port and polished, Crowercams, Crower dual springs and retainers, ARP head studs
Bottom end has Crower rods, JE pistons,Benson sleeved block

SPOOLINmatt

S400-67 FMW
$950 Shipped

Price is Shipped 706-346-6024
Center section just received new bearings and balancing, Everything is in good shape.
Turbine housing is thermal coated black, compressor housing is also thermal coated silver(believe it or not)
1.25 a/r, makes plenty of power
Better pics will be put up

ls_on_boost

iTrader: (5)

SFWD motor for sale I have receipts of everything done to them this motor only has a few dyno sessions I wasn't able to finsh the car so rather then it just sit id rather let someone else injoy it the most power it made was one 890hp pull I ran out of full so we installed a 8 injector setup and never got to finish it motor was run with brad penn oil price is 4500 see pics below

Friedman

dont have many posts on this forum but i have 2000+ on bimmerforums and i sold a k20 head to fast guy last month so you can ask him for feedback. legit seller

lowereed prices from last month to move this stuff new prices in red

K24A2 long block with alternator and karcepts ps/ac delete out of an 06 tsx (was a running engine, never opened)

1000 picked up 900 picked up obo

Used BWR twin scroll with tial 38 mm wastegates hood exit 3 inch exhaust and wg tubes ceramic coated by tcc not willing to part setup
Purchased from treblic tuned (dhoist)
1250............ 1050 picked up obo


06 tsx trans with brand new m factory lsd and obx 1-2 built by cunha at clm 3-6 stock tsx gearing
1300 paid 1650 for the build plus the stock trans cost

1200 picked up

K tuned swivel thermostat housing comes with fittings for 16 an and an fitting for the other ports as well brand new
125



Local pickup in 07001 NJ …. 10 minutes from tristate motorsports/ clm new shop
Cash or paypal
pm me for my number


i took some crappy photos but i can get better ones if someone wants pm me

V-SPEC 1

Brand new PWM radiator never been used $150

Skunk2 Megapower RR 3" catback stainless steel exhaust like new hardly use. Fits Ek hatch $$475 obo.

4" aluminum V-band exhaust with race muffler fits eg hatch. $400

Brand new CX racing Intercooler $100

CC clutch stage 4 hardly used with throw out bearing for B series $275 obo.
Please contact me for more info on other parts for sale thank you. 9048134290




CC Stage 4 clutch with throw out bearing with less than 2k miles like new $275 obo.

Jdmsolutions

Pm or text 406-670-8840

used b series CC twin 800$




GE scattershield 170$


Hasport hydro trans crx/ef mounts with solid aluminum inserts 200$


s300 in vtec converted p06 ecu 400$

boosted03

Price: $700
Location: Louisville, KY
Buyer must cover PayPal fee or send as gift and cover shipping.

T4 6766 JB with ported H cover, turbo was sent in to have the cover done and checked over around 800 miles ago. No up and down shaft play, works fine and doesn't smoke. Compressor wheel has a few small spots but nothing went through it, ran it with no issue. A/R is a 1.15. Season is over so I'm moving up in turbo size.

ALL IMPORT

NOTICE SOME PARTS HAVE BEEN SOLD .
some of you might remember this project so here it is all laid out for sale.
almost every part is brand new never been used or ran, except a few small misc parts.

so much extra info on everything its to much to say so if you are serious about purchasing here is my contact info.
if you have any questions u can call me ( talking instead if text is way faster & easier to communicate IJS). Tim 561-644-3876
I am willing to do package deals on basically everything, I will even part out the motor.



NOTICE MY PHONE NUMBER> BEST WAY TO REACH ME!!!!! 561-644-3876

The list.
chassis shell. comes with front & factory tail lights all harnesses & interior (doors are quick release) 1,500$
jojo front end.(6 zeus comes off in 1pc) 500$
front control system with
(ceramic wheel bearings & traction bars) 800$
custom rear end ( willwood light weight) 650$ SOLD
Strange suspension 850$ SOLD
rims & tires. front & rear(exospeed 15,s 26x10) 2,200$
rear wing system carbon sticker & cleared 250$
Strange chute(blue) & mechanical release system 600$
meziere water pump set-up 320$

WILLING TO SELL TEH CAR AS A ROLLER...



engine was built by TEX BRE Motorsports.
u can call to verify anything. motor is fully
built & ready to make 1000whp+
no expense was spared.
BLOCK
LS crank
Darton sleeves O-ringed
GRP aluminum rods
billet girdle
CP 10.1 pistons upgraded pins
ATI Damper
Moroso alumimun oil pan
9k for commplete long block. BLOCK IS SOLD!!!

HEAD
GSR head 5 axes CNC port
RARE MOROSO valve cover..
Ferrea roller system.
BRE custom Ferra turbo cams, valves, EVERYTHING.all the goodies... 3,000$



turbo system Setup.
PT 7275-B Billet wheel & Ball bearing. 2,000$ SOLD
dual Tial 44MM MV-R gates. 550$ SOLD 1 ::: 1 left
custom manifold (Backpurged) 500$ SOLD
Custom BMC intake. 1,800$ 1 off pc.

misc parts list
Aem data gauge 100$
Sparco seats 250$
sparco harnesses 150$
dble gauge holder 75$
Tach Auto meter 100$
Aem fuel rail with line & guage 130$ shipped
anythying else u see just ask , lol

NWDyno

Location: Washington


-Grimmspeed 3-port MAC boost solenoid, new, $30

- (10) ProWireUSA sealed relay kits, new, $10/each