Please read the rules for the new thread. At the end of each month this thread will be unstickied, and a new thread created in this one's place. If you haven't sold your parts, you may post them in the new month's thread. DO NOT BUMP THE OLD THREAD

1) This is for RaceCar parts ONLY. No body panels, fenders etc allowed, unless it is a full race front end. ABSOLUTELY NO useless OEM parts!
2) Do NOT repost your thread over and over hoping to get it on a new page. If your parts sell please remove them from your post. If you sell everything off of your list of parts, report your post to moderator by clicking on the just under your user name and we will delete it.
3)You are ONLY allowed ONE post in this thread. If you are found to have more than 1 post, in the FS sticky all of your posts in the sticky will be deleted, and you will be given an infraction. With enough infractions you will be banned
4) NO WTB ADS!
5) NO COMMERCIAL POSTS AT ALL THIS MEANS, IF YOU OWN A SHOP DO NOT POST BRAND NEW PARTS IN HERE
6) Please provide all pertinent information, including price, and try to return pm's.

We will delete any BS we feel does not belong in here


Please try and limit the size and # of pictures you post. using thumbnails would be fantastic.


From this point on, 3-7-2012, any edit mods have to make to these threads, will result in sanctions. if it persists, the stickies will disappear for good. THIS WILL BE ADHERED TO. No more warnings

EVERYTHING HAS TO HAVE PICS NO exceptions

 

pm for more info. thank you
exedy twin disc -750
arias pistons 150 obo
bep s372-800
gsr gates racing timing belt sold!
b16 crank-30
str b series cam gear.-80
jacket-75
ceramic coated T4 b series front mount manifold $850

pm me for more info. Thank you.

 

V2 Competition Drag Wheels (4x100, 13x8 Front, 15x3.5 Rear, Bronze, NO RUBBER) - $800 Shipped









LS1 Coils with Wires, Harness and Bracket - SOLD



Skunk2 Cam Gears (Fit B, D and H Series) - $200 Shipped



Walbro Intank 400lph Fuel Pump for Civic/Integra - $150 Shipped







Taylor 8mm Spirax Plug Wires (Fit DOHC Vtec) - $80 Shipped





Vibrant 3" and 4" Air Filters - $30 Each

ARP Extended Wheel Studs (2 Packs) - $20 Each

Blox Rear Lower Control Arms (Fit EG/DC Need Bushings) - $100 Shipped

Paypal Verified. Paypal fees extra. Will ship same day as payment. Located in Kentville, Nova Scotia, Canada.

Text - 902-790-3941

 

Precision turbo 6262
Journal bearing
T3 .82A/R
SP compressor cover
Also comes with V band for down pipe
Street miles 0
2 dyno sessions
3 track days with 5-7 passes each day

Turbo is basically in brand new condition.
Made 661@26psi never ran more boost cause I was out of injector.






$800 OBO.

Call/text Nate
6127032001

 

Vehicle : 1996 integra

Price 5500 or obo

Not parting out anything on the car I might sell the strada front seperate.

Comes with Strada jdm 3 piece separate

 

up for sell is a nrg 5.5 gal fuel cell with lines and one 044 bosch fuel pump it mounts into oem spot am looking to get 550 for everything

 

direct port NOS 4cylinder kit u can use it as a wet kit or dry...(dry works
good with hondata or aem... i have new hard line for it so u can plum it for your intake (i can tap your intake and install it for u) price is $500 I CAN LOWER THE PRICE if u only need some things

2004 vento phantom 150CC scooter it will so 50 60mph nice for the street or track

skunk 2 pro cam gears $200

darton sleved block 85mm fresh out machine shop with ls crank clearenced with honda bearings $1400


13by8 weld mag. wheels selling with brand new 24.5 by9 mt slicks $1000

i have a 2 gallon alum. fuel cell that fits where your fuse box would go $200

scat b18 crank 95mm $200

p28 ecu chipped $150 (tell me your setup ill burn a chip for u )

p28 virgin $80

 

Selling a set of wiseco 81.5 9.1 pistons and eagle ls rods for 400 also have a b18b1 block with matching mains and pan for 150. stock b16 head with valvetrain removed and light portwork started 250 has gsr cams. Msd digital6 used for 2weeks 200 p06 converted to vtec,zif socketed with an p73 map on it with a plexi case 100. Pm for more info.

 

alum num 5x5x8inch baffled catch can I have for sale! I am asking $100 for this. The filters have been removed and sold, but I can obtain more for additional fee or just give you the part number.The can is baffled inside to reduce the amount of oil vapor that escapes out of the filters. They collect and catch it allowing it to fall back into the bottom of the can.The sheer volume of this catch can with the amount of volume it vents out allows your engine to breathe much better compared to the little cheap sealed 'greddy' like units. Shipping add $10.
Fits in the civic and integra battery tray.

 

Turn key 9 second drag/street car 690hp!! Located in eastern Pa.

IM POSTING THIS CAR FOR A FRIEND!! PLEASE DO NOT PM ME.

PRICE IS $10,000 firm.

NO TRADES!! NOT PARTING OUT!!!!!

HE IS SELLING TO FINISH HIS HOTROD.

Any questions or interest call or txt Ed 484-686-8540

If you're looking for a show car hit the back button now. but if you're looking for a well built reliable and insanely fast car this is it!!
Tuned by Jeff Evans on C16

CHASSI AND SUSPENSION:
92 Civic Dx hatch back clean title
Blox drag suspension, lenso vpd's with 24.5x9x13's slicks (brand new) 15x3.5 v2 skinnies
Car has been caged, carpet and rear interior removed.
Has one race seat and a 5 point harness.

ENGINE:
Darton sleeved Gsr block 84mm
polished Gsr crank
Manley turbo tough rods
Je pistons 9.5:1
All oem bearings
All arp hardware
Arp head studs
Ported and polished Gsr head
Skunk2 tuner cams
Fererra valves
Dual valve springs
Titanium retainers
Edelbrock intake mani

TRANS:
GSR trans with Quaiffe LSD
Carbon coated syncro's

ELECTRONICS AND FUEL:
Hondata s300 with boost by gear
Hondata boost solenoid
Hondata CPR kit with K series coils
Walboro in tank and in line pumps
Skunk2 composite fuel rail
Injector dynamics 1000cc's
Weldon fpr
Auto meter Tach, shift light ,air fuel,oil pressure and boost gauges.

TURBO KIT:
Complete Full-Race gt35r
Back door intercooler
Full-race ram horn
Tial 50mm bov
Tial 44wg
Thermal 3" turbo back exhaust

Sorry for the cell phone pics. Ill be taking some with my camera shortly.

 

I can also email or text pictures to searious buyers. ALL PARTS ARE NEW UNLESS ITS NOTED THEY ARE USED.
I want out of the game and want to pay off a few bills to free up some cash.

BLOCK: $3500 (this setup cost double my asking price)
FRESHLY BUILT 0 MILES. 1000hp capible setup!!!!
DART 1.8L HONDA BLOCK
84.5MM o-ringed
Pauter rods
Je 9.5:1 pistons
ARP hardware
Gsr crank
ACL bearings
Moroso 5qt aluminum pan with pickup

HEAD: SOLD!!!

TURBO KIT ITEMS:
Full race t3 ram horn (used) $600
Full race 3" vband downpipe (used) $200
Precison 750hp intercooler (used) SOLD!!!!!

GSR TRANS: SOLD!!!!!
Exedy Twin SOLD!!!!!!!!!

FUEL AND IGNITION:
AEM EMS 1060 $750
T1 hall sensor kit with cam gears and coils. (SOLD!!!!!)
AEM fuel rail $100
AEM 3.5 bar map sensor $100


MISC:
Skunk2 shifter $70
Skunk2 PRO Front camber kit (SOLD!!!)
Skunk2 Rear camber kit (SOLD!!!)
Skunk2 mega power RR 3" exhaust (SOLD!!!!)
Fluidyne Radiator (used) $225

 

Avid eg/dc mounts. Good condition
180 obo

 

Item: 92 587whp fully built civic part out

Price: $$$$

Location: Miami

Contact: Pm or text (305)409-5776. Don't text me after 10pm

Item Description:[B] Text me for prices i have a ton of parts that aren't listed that ill add

Vehicle Description: I'm parting out my pride and joy. I've owned the car 9 years. I think it's time for me to move on. It's a 1992 civic cx. Everything on the car is for sale. Everything

Quick edit: turbo kit $2350 I might part it out if enough interest
$700 for turbo with up pipe, $700 for manifold , $150 for each waste gate with dump tubes, $150 for tial BOV,$500 for intercooler piping with intercooler and clamps and couplings
Long block $4800
Short block $2800
Head complete $2100
Injectors 1600cc $250
Axles. $1250if provided with integra spindles $1350 if not
p28 $sold
ectune pro tuning license $100
moates ostrich 2.0 $sold
extreme hulog $sold
Aem wideband $sold
Fuel system without injectors (full blown dual Walbro kit with all braided lines, filter, fpr, fuel rail, and all wiring) $650
Or will seperate $350 for full blown dual Walbro kit with all wiring, $100 for fuel lines and fittings, $100 for fpr, $100 for bdl fuel rail
Jdm GSR tranny built by Turbogixxer with factory LSD $sold
B series shift linkage $80
Original oem Integra Type R shift *** with nut$
V2 competition drag wheels with 24.5x9x13 slicks $350
Competition clutch twin disc $750
Speed factory 4 bar map sensor $sold

Engine:
ERL sleeved 84mm b18
Je 84mm pistons
Eagle 89mm rods with upgraded rod bolts
Acl race bearings
ATI super dampner
REV stainless Steel Valves
REV dual springs
REV titanium retainers
Blox spec B camshafts
Skunk2 pro series cam gears
Skunk2 intake manifold
BDL fuel rail
Ford motorsports 1600cc injectors
Arp studs
Cometic 84.5mm head gasket
New oem water pump
New oem oil pump
New oil timing belt
Speed factory 4 bar map sensor
Probably more things I'm forgetting

V2 competition drag race wheels 13" with mt 24.5x9x13 slicks
Transmission
Jdm GSR transmission with factory LSD
Built by Turbogixxer
Competition twin disc clutch and flywheel
Drive Shaft Shop 5.9 axles with hubs
Turbo setup
Precision 6765sp turbo 82ar
Custom top mount exhaust manifold t3
Custom hood exit down pipe and dump tubes
Custom intercooler piping
Tial 50mm blow off valve
2 tial 38mm waste gates
Big front mount intercooler
4 port boost controller
Oil catch can

ECU is a p28 with ectune software for tuning

Fuel system
Full Blown Dual Walbro kit
Full braided hose and fitting with inline aeromotive fuel filter
Sx engineering fuel pressure regulator

Chassis
1992 civic cx painted viper red
Cut fenders to fit 24.5x9x13 slicks
I painted the car 5 years ago
GSR suspension 4 wheel disk brakes
H&r lowering springs
No ac
No ps
Has a radio
Has full interior with no carpet
Momo steering wheel
Jdm SIR cluster(kph) lights up amber
Aem uego wideband and gauge
Boost gauge
No name brand racing seats
Comes with 2003 civic so wheels and tires
Also comes with racing wheels and slicks

Car is basically a true street class race car.
Ran a best 6.8 at 110mph with 587whp and 411trq
Since then I fixed boost leaks and upgraded map sensor to a 4 bar and upgraded the boost controller to a 4 port. Goal was to make 800whp. I don't have the time to take it to the dyno and have Turbogixxer finish tuning it. He can vouch for the car as well as Damian at td autowerkes.

Here's a few vids from YouTube on the car

92redhatch - NSCRA 2K12 at Countyline Dragway - YouTube

[url=http://youtu.be/kdb_JnmdPac]587whp 411wtrq at 27psi 6765 billet t3 - YouTube[/

Photos: Photos:














Dss 5.9 with half shaft



P28, ostrich 2.0, extreme hulog, ectune tuning software everything you need to tune your own car. Boost by gear anti lag etc


Full blown dual Walbro kit


Boost gauge


Oil pressure gauge


Rear strut bar


Stock radiator


Distributor with NGK blue wires


Skunk 2 pro series cam gears


ATI dampner


BOV


Tbolt clamps couplers tbody skunk2 Im speed factory 4 bar


1600cc injectors bdl fuel rail


Catch can and FPR


3 pillar gauge pod


Momo Steering wheel


JDM SIR gauge cluster


Competition clutch twin disc

How it looked. 9 years ago when I bought it in high school

 

Sold

 

Sold

 

706-346-6024
matt.stover@comcast.net

ATI Street Damper: $250

MSD Digital 6: $200

Aeromotive Pro Pump - Flows a shitload
$525



-Precision GT4272R, 1.28 divided T4, 4" outlet
$1675
-Custom Forward Facing Turbo Manifold, Selling for someone else, test fitted on my car to show pictures. Fabricated by Joe Simpson at Tempest Racing.
With 4" SS Downpipe
Flanged for 60mm Tial
$1200









Liberty's Gears 1st generation 3rd gear, countershaft side, 34 teeth, 1.36:1
I no longer need to keep it as a spare
$100 OBO

 

Up for sale is my blueridge Top mount. It has a t4 turbo flange with 44mm Wastgate. The manifold is thermo coated. It also come with v band dump tube. It has a 3inch vband down pipe. Im askin $800 Plus shipping & pp Fees. The manifold cost me 1150 plus 300 to get it coated. that 1450. This is a bargain. Also Willing to take trades

Before coating.



After

 

IF INTERESTED CALL 973)390-2982

Weld skinnies with tires 23"x5"x15" powder coated black $1,200







Garrett turbo gt42 billet 72mm ind 102 exd...divided housing T4 1.44 a/r...made 865 @35psi... in excellent condition no shaft play no smoking and makes great power $2,000





custom catch can sits next to the battery $200
the bracket is welded onto the battery tray*

comes with
battery tray w/ bracket welded to it
all 4 lines and fittings minus the 2 fittins on the actual block











B-series shift linkage with a B16 shifter $80

 

pretty much everything on this shelf is for sale. all parts are brand new unless i say its used.
most of this is for my true street k series integra i was building. but do to work being extremely slow im having to sell at least 4k worth of parts. so once i get enough sold i wont sell anymore.
bws400sx 67mm 1200$ comes with optional 1.25 turbine housing
weldon db2025-a fuel pump -12 inlet -10 out 650$
-12 100mic weldon filter 105$
-10 40mic weldon filter 90$
a2040-281-a-120 weldon regulator 225$
complete ferrea k series valve terrain,comp plus valves,springs,retainers,seals,guides, 900$
k series aem v2 950$
AQ1 w/long harness 450$
3 aem 5bar maps 100ea$
2 aem 150psi fluid sensors 100$ea
aem 4 channel egt box(used) all new aem egt sensors and ext harnesses 500$for all
used k series aem v1 650$
skunk2 b series pro 2"s new intake very lightly used exh cam 500$
m factory pro series b series 4.0 final drive
fcs fuel cell w/sender -12 feed lines and -10 return for the big weldon pump 450$
k20 brand new grp aluminum rods 650$
stock sleeve k20 new rods,bearings,heavy duty pins,rings,all new ferrea valves,springs,retainers 3000$
rays gram lights 15x7 4x100 gold rims 1200$w\tires like new. still has stickers on them
chase bays custom k series harness with firewall disconnect (off td autowerkes ek hatch) 750$
these are stupid cheap prices on all these brand new parts, these prices DO NOT include shipping or paypal fee's

 

woops edit

 

hey guys got some stuff laying around were trying to sell.

Bosh 044 dual pump hanger= $100 OBO



Turbo Smart BOV = $200 OBO


Tilton carbon carbon twin disk for a k-series includes tilton hydraulic release bearing and tilton flow control valve = $4000 OBO


Water to air intercooler= $500 OBO


AEM Wideband = $195 OBO


Garret GT40 T4 Divided housing 1.19 A.R 3"V-band $250 OBO





For Questions and Details PM or call 786 293 8876

 

FS: Weld rear 1 piece black/machine 4x100 15 inch rear rims. With M/T 25inch tires in great condition


$1000.00 for all. please text me at 951 322 2798

 

SOLD!!!!!!!!!!!

 

Last year I had a beautiful daughter and this summer I found out my priorities have changed, so I parted my car. PM me with any questions, I check them often.

1990-1991 Clutch Master twin disc fx725, less than 5,000 street miles- $450

ob0-ob1 Xenocron adapter- $40

1991 Acura Integra shell, welded 10point S&W cage, Skunk2 drag coil-overs on KYB, sumped stock tank, VIS carbon fiber hood, Lighter-Faster carbon fiber sunroof plug- $1750

 

I bought this T4 top mount i was going to use on my ef and it did not clear...it was made for a eg/dc or will also work with an ek...i just got it back from getting JETHOT coated and so now im stuck with a ramhorn manifold...im asking $600 for the top mount and the Turbosmart 48mm waste gate and dump...

Located in chicago