FS: D16Z6 Forged Piston/Rod Combo *CHEAP*
#1
FS: D16Z6 Forged Piston/Rod Combo *CHEAP*
Name: Cee
Contact: pm or call/text (919) 604-3132
Up for grabs is my 75.5mm Eagle/Wiseco setup for a d16z6. I bought the pistons used in their current condition, took them by the machine shop and the small chips on the ring land area and dome will not cause a problem as long as you smooth out the rough edges. The skirts show normal wear and pistons look good otherwise. These are -14cc's which in a Z6 should put your compression ratio around 8.5:1.
Asking $360obo
I will ship and I am Paypal verified.
Fill free to check my iTrader rating and buy with confidence.
Small nick in the ringland area
Small nick top of the dome area
Contact: pm or call/text (919) 604-3132
Up for grabs is my 75.5mm Eagle/Wiseco setup for a d16z6. I bought the pistons used in their current condition, took them by the machine shop and the small chips on the ring land area and dome will not cause a problem as long as you smooth out the rough edges. The skirts show normal wear and pistons look good otherwise. These are -14cc's which in a Z6 should put your compression ratio around 8.5:1.
Asking $360obo
I will ship and I am Paypal verified.
Fill free to check my iTrader rating and buy with confidence.
Small nick in the ringland area
Small nick top of the dome area
Last edited by GEN2 LS; 06-09-2014 at 03:25 PM. Reason: added contact info
Thread
Thread Starter
Forum
Replies
Last Post
JDMCRX
Classifieds: Forced Induction
1
04-20-2007 04:00 AM
GapxGuy
Honda Civic / Del Sol (1992 - 2000)
9
05-18-2005 08:40 PM