Weak!EG's re-build thread.
05-19-2010, 01:22 PM
#51
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
The big sticker, is who built my motor and the owner has taught me so many things. I'd never have been where I am without his help. The small one is my battery switch sticker, which is required by nhra.
Update soon. I got my roll cage, just have to have it welded. I bought a soda blaster, and im going to strip the whole car and start with fresh metal. Want the car to be as light as possible
I also got a set of fender flares that are very aggresive, but not as large as the jojo or exospeed front ends are.
The teg is almost done and it's crunch time on this car.
I bought a cheap windshield remover from harbor freight yesterday and got the windshield and 1/4 glasses out without breaking them this morning!! Going to replace the back 3 windows with FAL, and the factory glass for the rest.
Update soon. I got my roll cage, just have to have it welded. I bought a soda blaster, and im going to strip the whole car and start with fresh metal. Want the car to be as light as possible
I also got a set of fender flares that are very aggresive, but not as large as the jojo or exospeed front ends are.
The teg is almost done and it's crunch time on this car.
I bought a cheap windshield remover from harbor freight yesterday and got the windshield and 1/4 glasses out without breaking them this morning!! Going to replace the back 3 windows with FAL, and the factory glass for the rest.
06-04-2010, 04:42 AM
#55
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
A couple snaps of whats been going on 
should get started on stitch welding really soon hard to build 2 cars at once. lol.
should get started on stitch welding really soon
hard to build 2 cars at once. lol.
06-04-2010, 08:34 PM
#58
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
Car is heavily supported, just cant see it in the pictures..
got most of the center tunnel done today, once thats finished going to jack the rear up, do that small area and it's off to stitch weld
got most of the center tunnel done today, once thats finished going to jack the rear up, do that small area and it's off to stitch weld
06-04-2010, 09:18 PM
#59
Honda-Tech Member
Join Date: Apr 2008
Location: In The Sticks, PA, America
Posts: 8,958
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
oh ok. good! i'd hate to see something happen while you were under it!
you just going to cover it with por15 or something like that then or whats the plan for it?
you just going to cover it with por15 or something like that then or whats the plan for it?
06-05-2010, 06:10 AM
#61
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
06-05-2010, 01:15 PM
#63
Honda-Tech Member
iTrader: (4)
Join Date: Mar 2007
Location: nc
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
hey man when are you working on this again? let me know so I can start utting time in on build version 2.0 lol.
Kep your flaring tools and **** this time so we can do all my **** when i pull the h2b out for this jswap
Kep your flaring tools and **** this time so we can do all my **** when i pull the h2b out for this jswap
06-09-2010, 11:07 AM
#64
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
yes, i'll get to them. have a lot of "unique" ideas for the inside..
have been very busy at work lately but here is a few snaps of how the bottom is going..
the front 1/2 is primed in, and looks great..
its a SLOWWW process but it's getting there.
and the roll cage, is just waiting
have been very busy at work lately but here is a few snaps of how the bottom is going..
the front 1/2 is primed in, and looks great..
its a SLOWWW process but it's getting there.
and the roll cage, is just waiting
06-12-2010, 08:25 AM
#67
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
Not crazy.. just hard to do something "different" thats not on every other honda. To achieve that these days you have to do labor intesive things because most of the scene has turned into who's bank account is bigger.
This didnt cost me anything but time
This didnt cost me anything but time
06-14-2010, 08:21 PM
#71
Wheres my titleeeee!
Join Date: Feb 2007
Location: West Haven, CT, USA
Posts: 698
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
LOL! Build is lookin good. Im in the process of doing my hatch now. It got stolen from me after 5 years of it being nice and this build gives me some ideas. Keep up the great work man.
