Weak!EG's re-build thread.
11-26-2010, 06:14 PM
#127
Honda-Tech Member
Join Date: May 2009
Location: Aberdeen, Scotland.
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
This is cool. I really like how you are stipping the car back to bare metal and starting over. I am doing the same thing on my EG. I also really like how you had the doors straightened out. You just cannot beat good old fashioned craftsmanship.
Keep up the high quality.
Keep up the high quality.
11-29-2010, 10:26 AM
#129
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
got the driver door in primer, and blocked it out twice with 400 grit.. turned out soo slick. will go over it one final time with 600 grit when its time to paint the car.
got started stripping the passenger door, it wasn't nearly as bad off as the driver.
almost there.
also, got started on prepping the insides of the doors for the respray. i'm not sure why the body shop left the centers red, but i wont be this time
got started stripping the passenger door, it wasn't nearly as bad off as the driver.
almost there.
also, got started on prepping the insides of the doors for the respray. i'm not sure why the body shop left the centers red, but i wont be this time
11-29-2010, 10:34 PM
#133
Re: Weak!EG's re-build thread.
I hate when you read through several pages of a build thread hoping that the build has been completed and you can reach that final page and see a finished product only to see...doors being stripped. 
Great thread so far and am def. subscribing! Push the envelope!
Great thread so far and am def. subscribing! Push the envelope!
11-30-2010, 08:55 AM
#134
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
i wish i had a finished product to post.. i havent seen the car but once in the past 6 months other than cell phone pictures from the fabricator. I'm hoping by the end of january to have some really serious updates to post (:
december is gonna be a busy month for me and i doubt i have much time to work on it.
december is gonna be a busy month for me and i doubt i have much time to work on it.
12-04-2010, 11:06 PM
#139
Honda-Tech Member
Thread Starter
Join Date: Apr 2006
Location: Newport, NC, 28570
Posts: 1,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
Got the front 1/2 of my interior harness back from the homie!..
Mod List:
Re sleeved in nylon braided loom.
Deleted factory ecu plugs.
Added a plug to passenger side for headlight harness extension. (in EG's the pass side is wired into harness and driver side is on a plug)
Moved the ignition plug from driver side to passenger side so i dont have to use a jumper harness to reach.
Mod List:
Re sleeved in nylon braided loom.
Deleted factory ecu plugs.
Added a plug to passenger side for headlight harness extension. (in EG's the pass side is wired into harness and driver side is on a plug)
Moved the ignition plug from driver side to passenger side so i dont have to use a jumper harness to reach.
04-20-2013, 03:06 PM
#144
Trial User
Join Date: Apr 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Re: Weak!EG's re-build thread.
Hello Weak!EG,
I saw the great paint job you did on your girlfriends car and I want to find out how much you would charge to paint my car. You can contact me four zero four six zero three six eight four four.
I saw the great paint job you did on your girlfriends car and I want to find out how much you would charge to paint my car. You can contact me four zero four six zero three six eight four four.
04-20-2013, 03:18 PM
#145
Honda-Tech Member
Join Date: Sep 2010
Location: Pensacola, FL and every Court House in Louisiana
Posts: 3,114
Likes: 0
Received 2 Likes
on
2 Posts
Re: Weak!EG's re-build thread.
This thead has been dead for two years and op has of updated in three. Looks like this never got finished!
Thread
Thread Starter
Forum
Replies
Last Post
