<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">

cheap! </TD></TR></TABLE>

D series builds FTW. It may be considered cheap by most, and I guess for the amount of power it's gonna be putting down, it is, but I'm in school and limited to how much I can work.

The next two months though I'm home all the time and will be able to work full time and make some moolah.

My plan is to have all the electrical stuff done, then swap in the built motor along with the new clutch and stock tranny. While the Si tranny is out of the car, I'll build it with an LSD and heat treated gears. When it's done, I'll swap it back in along with all my turbo stuff and get the bitch tuned.

Once i get the electrical stuff done, I'm gonna just start putting money toward the motor. Hopefully I can get it in before january.

 

do you know how far $2K goes when doing a K swap?


a header and k pro. consider yourself lucky.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">do you know how far $2K goes when doing a K swap?


a header and k pro. consider yourself lucky. </TD></TR></TABLE>
That's without a tune too.

I demand new pictures!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evil M0nkey &raquo;</TD></TR><TR><TD CLASS="quote">
I demand new pictures!</TD></TR></TABLE>

Lol, of what? Once I start re-doing the harness I'll take pix.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Evil M0nkey &raquo;</TD></TR><TR><TD CLASS="quote">
That's without a tune too.

I demand new pictures!</TD></TR></TABLE>


well, you could probably get it tuned too for $2k if you get a decent deal on the header and kpro.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman &raquo;</TD></TR><TR><TD CLASS="quote">

Lol, of what? Once I start re-doing the harness I'll take pix.</TD></TR></TABLE>
You dancing to this
http://youtube.com/watch?v=RKQgDY0pZ68
Should be good entertainment.

 

$2k in my GSR swap gets me the engine, axles, an ECU and the need for a rebuild. I regret not swapping a D16A6 and going FI.

Good build, as always.

 

I picked up some sexy as hell Keizer wheels for $150 today. Straight up stole those things.

 

thievery

 

what front lip r u using the thing looks clean.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdm_titan &raquo;</TD></TR><TR><TD CLASS="quote">what front lip r u using the thing looks clean. </TD></TR></TABLE>

Acura Vigor.

 

tim has butthole pleasures.

 

Took some pix of the hatch with the Keizers on.

They look like little go-kart tires. 225/45-13!!! They're tiny autocross tires. They will soon be replaced with some bigass 24.5x9x13 slicks.

 

its looking good so far. give us updates when finished

 

haha those things look sick on there

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Snailed EF &raquo;</TD></TR><TR><TD CLASS="quote">haha those things look sick on there</TD></TR></TABLE>

are u serious...?

 

As you have said in the past function over looks....but I gotta say it looks like they belong on a low rider truck, stickin out the fender well so far

 

they look good enven though they give you wheel gap i hate wheel gap

 

Well, I'll be getting a new piece for the back rims which will turn them into skinnies. They'll have some 155/80-13's on them. Then the fronts will get some MT ET Drag 24.5x8x13 slicks.

$150 ain't bad for some drag rims!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dustin_Pierce &raquo;</TD></TR><TR><TD CLASS="quote"> Do you know what this means?</TD></TR></TABLE>

Doesn't matter.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tippyman &raquo;</TD></TR><TR><TD CLASS="quote">

Doesn't matter.</TD></TR></TABLE>

no it doesnt

for nitrous i should install mine soon

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JKGONZALEZ3 &raquo;</TD></TR><TR><TD CLASS="quote">

no it doesnt

for nitrous i should install mine soon</TD></TR></TABLE>

Drop me a PM if u get any questions...

 

alrite, i have been asking alot lately but it seems very interesting and easy to use and run.

 

yo Tippy: i dunno if you posted those rims already but its a fiirst time i see them and they r so sick, boy oh boy!

i would just strech some tires if i were you, but thats just me

 

i doubt hell do that cause there for racing so streched tires wont be good for that.