Project 300whp NA B-series begins. Brought to you by Tbone and Rlz engineering
#251
H-T Order of Merit
This thread took a weird turn a minute ago.
The offender's address has been reported, and the post deleted.
If there are any other difficulties, just come and get me.
The offender's address has been reported, and the post deleted.
If there are any other difficulties, just come and get me.
#253
H-T Order of Merit
Re: (jd3jdm)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jd3jdm »</TD></TR><TR><TD CLASS="quote">Definitely turned REALLY wierd there.
Was T-bone notified about what was said?</TD></TR></TABLE>
Yes, he was notified. Considering that the poster was on the opposite side of the continent, it seems to have just been a very bad joke.
Was T-bone notified about what was said?</TD></TR></TABLE>
Yes, he was notified. Considering that the poster was on the opposite side of the continent, it seems to have just been a very bad joke.
#255
Re: (slofu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slofu »</TD></TR><TR><TD CLASS="quote">just leave the dead trespassers out front in plain view to deter further theft attemps. </TD></TR></TABLE>
#258
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: (98JDM_Type_R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98JDM_Type_R »</TD></TR><TR><TD CLASS="quote">any progress on the motor?</TD></TR></TABLE>
Just got a new crankshaft for the motor , still a 95 mm unit, pics will be posted this week.
Just got a new crankshaft for the motor , still a 95 mm unit, pics will be posted this week.
#259
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: (rochesterricer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rochesterricer »</TD></TR><TR><TD CLASS="quote">You gonna get some ET's with the 255whp motor before you start tearing it down to make this one?</TD></TR></TABLE>
If time permits and I can redyno to make sure its still making that power.
If time permits and I can redyno to make sure its still making that power.
#260
Honda-Tech Member
Join Date: Jul 2003
Location: western, PA
Posts: 1,838
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tbone)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tbone »</TD></TR><TR><TD CLASS="quote">
If time permits and I can redyno to make sure its still making that power.</TD></TR></TABLE>
So many people have been watching that whole build it would be nice to see the end result before its put to sleep!
If time permits and I can redyno to make sure its still making that power.</TD></TR></TABLE>
So many people have been watching that whole build it would be nice to see the end result before its put to sleep!
#262
Trial User
Join Date: Apr 2004
Location: Nashville, TN, USA
Posts: 2,631
Likes: 0
Received 0 Likes
on
0 Posts
Re: (spooncivic1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 »</TD></TR><TR><TD CLASS="quote">the hell with a dyno, i want to see a time slip</TD></TR></TABLE>
#263
Honda-Tech Member
Re: (spooncivic1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 »</TD></TR><TR><TD CLASS="quote">the hell with a dyno, i want to see a time slip</TD></TR></TABLE>
you need to learn alittle more about built motors then ...
you need to learn alittle more about built motors then ...
#265
Honda-Tech Member
Re: (XtraFastCRX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by XtraFastCRX »</TD></TR><TR><TD CLASS="quote">you need to learn alittle more about built motors then ... </TD></TR></TABLE>
so let me guess more hp = faster time right?
i dont see you building at 255whp motor
so let me guess more hp = faster time right?
i dont see you building at 255whp motor
#267
Honda-Tech Member
Re: (spooncivic1)
im building a 300 whp motor too... but i'm cheating, it's a k series
t bone is the kind of human that loves to run his car when it's perfect and only perfect.. well that's how i see him... and if i'm wrong .. heck with it it should come as a compliment....
o and to stay on topic Good luck with the project i know skunk was close to 300 when they stopped with the b series in their race car...
t bone is the kind of human that loves to run his car when it's perfect and only perfect.. well that's how i see him... and if i'm wrong .. heck with it it should come as a compliment....
o and to stay on topic Good luck with the project i know skunk was close to 300 when they stopped with the b series in their race car...
#268
Honda-Tech Member
Thread Starter
Join Date: Mar 2001
Location: North East
Posts: 4,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: (spooncivic1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 »</TD></TR><TR><TD CLASS="quote">the hell with a dyno, i want to see a time slip</TD></TR></TABLE>
My car ran 11.78 at 115mph with the 238whp setup when it still had an intake manifold.. Thats was with a 2.1 60ft at 2080lbs.. Do the math for the what it could run with the 255 it made last time on the dyno...
Not sure if you guys are saying anything but my car has run and there the videos to prove the runs..
My car ran 11.78 at 115mph with the 238whp setup when it still had an intake manifold.. Thats was with a 2.1 60ft at 2080lbs.. Do the math for the what it could run with the 255 it made last time on the dyno...
Not sure if you guys are saying anything but my car has run and there the videos to prove the runs..
#270
Honda-Tech Member
Re: (Tbone)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tbone »</TD></TR><TR><TD CLASS="quote">My car ran 11.78 at 115mph with the 238whp setup when it still had an intake manifold.. Thats was with a 2.1 60ft at 2080lbs.. Do the math for the what it could run with the 255 it made last time on the dyno...
Not sure if you guys are saying anything but my car has run and there the videos to prove the runs..</TD></TR></TABLE>
yeah im saying a time slip with the 255whp
Not sure if you guys are saying anything but my car has run and there the videos to prove the runs..</TD></TR></TABLE>
yeah im saying a time slip with the 255whp
#271
Re: (spooncivic1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spooncivic1 »</TD></TR><TR><TD CLASS="quote">
yeah im saying a time slip with the 255whp</TD></TR></TABLE>
He has not run it since the newest dyno #s
yeah im saying a time slip with the 255whp</TD></TR></TABLE>
He has not run it since the newest dyno #s
#274
Member
Join Date: Feb 2002
Location: Connecticut, USA
Posts: 1,922
Likes: 0
Received 0 Likes
on
0 Posts
Re: (berettagtz117)
Tom there is a drag day coming up in October for thepike.net i think its $75.00 a car with 75 cars max.
maybe we should considering running the car before we pull the motor... just for fun. Haven't talked to you about the build in awhile so i don't know what the schedule is
maybe we should considering running the car before we pull the motor... just for fun. Haven't talked to you about the build in awhile so i don't know what the schedule is
#275
B A N N E D
Join Date: Apr 2004
Location: hartford, yeah were dirty, ct, usa
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
Re: (manson)
Good luck on your quest Tom I really hope u reach your goal of 300whp, this would be remarkable goal for the NA honda tuners in the world and your just the man to do it!