So i put a timing light on my car today to see where it was at and i get no makes on the crankshaft pulley that i can see. So i look to see where they are an they are 180 off of the timing mark on the timing belt cover. I have no misfires, no power issues. could my timing have jump?

Any input would be greatly appreciated

 

No it couldnt be 180 out and run fine with no issue. Im betting it is user error. Hook it up and try agen More than likely you miss interpreted it

 

when i bought my teg it wont start sometimes so im thinking to myself why is that, i decided to change timing belt and guess what, the old timing belt was for a civic hatch and was one tooth short but it still ran fine exept it wouldnt start sometime until u wait 15 min and then it starts, weird.