Noisy Valve train
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Noisy Valve train
I installed Buddy club Spec 4 cams, Buddy Club P1 valve springs (dual springs) and cam gears. Since then when i drive the head sound super noisy, there is a annoying rattle that sounds like something is loose.
A friend told me to recheck my Valve lash, another told me that it is the inner valve springs.
Anyone else installed similar and had tones of noise?
A friend told me to recheck my Valve lash, another told me that it is the inner valve springs.
Anyone else installed similar and had tones of noise?
#2
Honda-Tech Member
Join Date: Feb 2004
Location: IN STORES NOW
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noisy Valve train (eg6madness)
check your lost motion assemblies...is it local to a certain area or does the hole head make noises? cause high lift cams and stiff valve springs are alot noiser than stock.
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 694
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noisy Valve train (Syner-G-Racing LLC)
It seems like the entire head.... it sounds like a train on tracks.....
Is that normal..... it takes some getting used to but it bites
Is that normal..... it takes some getting used to but it bites
#5
Honda-Tech Member
Join Date: Feb 2004
Location: IN STORES NOW
Posts: 933
Likes: 0
Received 0 Likes
on
0 Posts
Re: (wed3k)
as long as the valve spring you got accomodate the lift on the cams to avoid coil bind your good. it sounds like its just noisy. you could post up a video or sound clip and we could help more
Thread
Thread Starter
Forum
Replies
Last Post