kingsnake692005

I am wondering if you can bolt the dc integra rotors, caliper & caliper mounting brakets to an ef front knuckle.. Im also doing the rear disk swap & im swaping the master cylinder, & proportuning valve to do the rear disk swap the correct way.
Im keeping my D motor but I wanna get the aftermarket stock "big brake kit" thats why I needa know if the front brakes will bolt to an ef front knuckle.

roastbeefrichie

iTrader: (1)

no, you cannot bolt up the 94-01 integra LS/RS/GS/GSR front caliper & rotors

onto your 88-91 civic EF front knuckle

(unless it is a 90-91 civic EX front knuckle; which accepts 10.3" front rotors, same size as found on any 90-01 integra * excluding ITR)

> if you do not have the 90-91 civic EX front knuckles

then you have 88-91 EF DX knuckles, which use 9.4" front rotors.

here's a few options for upgrades on DX knuckles:

1. www.fastbrakes.com sells a bracket which mounts the DC integra front calipers onto a DX knuckle with a larger rotor set-up.

honda-tech member BE2 specializes in OEM honda brake upgrades kits.

2. here's a link for: s2000 front calipers, which use 11" rotors on a DX knuckle
http://hondamarketplace.com/showthread.php?t=2569691



3. Acura CL brake upgrade for 9.5" Civic Brakes > 11" rotor
http://hondamarketplace.com/showthread.php?t=2756883

kingsnake692005

could i use ex knuckles off of an eg hatch

roastbeefrichie

iTrader: (1)

92-95 civic EX (or 94-01 integra LS/RS/GS/GSR)

front knuckles are better suited for EG civics

kingsnake692005

I have an ef/ed hatch & i was wondering if the eg knuckles will fit my hatch

roastbeefrichie

iTrader: (1)

for the best alignment results on any 88-91 civic/CRX EF,

use 90-91 civic EX or 90-93 integra DA front knuckles (complete with calipers)


https://honda-tech.com/forums/honda-crx-ef-civic-1988-1991-3/da-knuckles-vs-si-knuckles-ex-knuckles-big-brakes-2140287/

eviled

s2000 calipers and carriers with 3mm milled off the back on 12" civic type R (ep3) discs on CRX SiR knuckles

99SiStyle

I have the DA front brake conversion from fastbrakes, works great!

spoon.ef9

anyone got pics to confirm an s2k caliper on an ef(stock cx hub)? And what size rotor from what car?

89ED

what if i have 90 lx knuckles on my 90 lx sedan can i do it?

jds400ex

I got and 90 ef si that I want swap with dc 4door brakes. I also have tokico struts and neuspeed springs from a 93 del sol that im going tobe putting on. just wondering if all this will work