Nonvtec eg6

Hi h-t just wanted to share our new pb on our new turbo single cam project. We had some issues with the boost (it was tuned on 31 psi but in the track ot wouldnt go more than 25) plus it ran out of gear.
Setup consist:
76mm stock sleeve d16
Vitara pistons with fj spec rods
Crower valvetrain with crower cam
Obx top mount mani with pte 6765
Elderbrock im with 70mm tb and 1000cc rc injectors
Gsr 4.40 tranny running on 24.5 x 9 13inc tires

seelback

video is set to private

Nonvtec eg6

Fixed

2fast4u831

Nice pass man! should be low 10's once you fix the gearing issue.

Nonvtec eg6

Thats the goal, the rev limiter was set to 8,500 we are gonna try it now at 9,000 and fix the boost leak so we can make the 31 psi

2fast4u831

dale duro hasta los 9 segundos.

Jockobo

Might wanna secure that ostrich before it detaches itself from the ecu lol. What kind of software are you tuning with?

Nonvtec eg6

Ectune

Tippyman

Did you go with the d2b right off the batt or did you try the d trans first?

Nonvtec eg6

Off the bat, the car was previously b series allmotor so we already had the tranny

1992Si

Good luck with that set up.

welfarepc

Very nice man. 500ish?

Nonvtec eg6

531 @ 31psi on q16, the pass was at 25 psi had about 450

kit88

iTrader: (1)

Great pass !!!M good luck going low 10's

kit88

iTrader: (1)

What fuel pump ??? It's loud

Nonvtec eg6

Thanks! Thats the goal. The fuel pump is a Weldon

FarmYard

good stuff dude. keep it going.

Nonvtec eg6

Pic of the car and timeslip

welfarepc

Update the signature and get it back out there. lol!

13g-crx

Be careful with the rpm. Everything I've read suggest that the vitaras do not llike to spin that high.

2000CTRSi

Awesome! My client has the same setup but with sc61 and ramhorn, stage 3 all motor cam, and the higher comp vitaras... makes 524 @ 28psi on c16. We were watching this car closely! Great engines! Good job monolito