I NEED HELP FAST.. PLS
#1
Junior Member
Thread Starter
Join Date: Oct 2004
Location: socal, ca, USA
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
I NEED HELP FAST.. PLS
i recently adjusted my valve clearance, but when i tried to start it..
the check engine light stays on.. and the ecu gives me 10 short blinks anyone knows what the problem is.. it would help me alot!!
pls help!! i need help fast.
thanks in advance!
the check engine light stays on.. and the ecu gives me 10 short blinks anyone knows what the problem is.. it would help me alot!!
pls help!! i need help fast.
thanks in advance!
#3
Junior Member
Thread Starter
Join Date: Oct 2004
Location: socal, ca, USA
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Re: I NEED HELP FAST.. PLS (mr. carpenter)
where is that located??
o yea, after adjusting no.2 valve do i put the "up" mark again in 12 o clock position?
o yea, after adjusting no.2 valve do i put the "up" mark again in 12 o clock position?
#7
Junior Member
Thread Starter
Join Date: Oct 2004
Location: socal, ca, USA
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Kasper.)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kasper. »</TD></TR><TR><TD CLASS="quote">does the car start and idle smoothly? </TD></TR></TABLE>
no.. i think the valve clearance adjustment is wrong..
i might adjust it again..
no.. i think the valve clearance adjustment is wrong..
i might adjust it again..
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Oct 2004
Location: socal, ca, USA
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
ok everything is running fine now..
the reason why my check engine was on..my IntakeAirTemperature Sensor was disconnected.. and i had a friend adjust my valve clearance. so everything is ok now.. whew!
thanks for all who left a comment tho
the reason why my check engine was on..my IntakeAirTemperature Sensor was disconnected.. and i had a friend adjust my valve clearance. so everything is ok now.. whew!
thanks for all who left a comment tho
Thread
Thread Starter
Forum
Replies
Last Post