wiring killswitches (wire colors?)
#1
Honda-Tech Member
Thread Starter
wiring killswitches (wire colors?)
hey what are the best wires to put killswitches on?
i am wiring up a series of kill-switches on my ride. i have several already, but i want to tap into every single switchable wire that would immobilize the car (yes this is extensive project, yes i'm serious.)
fuel pump - yellow wire w/green stripe
injector pwr wire - ?
ignition wire - ?
starter relay trip wire (small gauge, activates relay for starter spinning) - ?
others - ?
it would also be nice to hear where the wires can be found (which harness etc)
inb4 - you are a dumbass
inb4 - there is no crime where you live like where i live
inb4 - you don't need 9 killswitches
killswitches would be handy for example.... going interisland for a few days and leaving the car in an airport parking lot. going somewhere for vacation, leaving car parked for week+
i am wiring up a series of kill-switches on my ride. i have several already, but i want to tap into every single switchable wire that would immobilize the car (yes this is extensive project, yes i'm serious.)
fuel pump - yellow wire w/green stripe
injector pwr wire - ?
ignition wire - ?
starter relay trip wire (small gauge, activates relay for starter spinning) - ?
others - ?
it would also be nice to hear where the wires can be found (which harness etc)
inb4 - you are a dumbass
inb4 - there is no crime where you live like where i live
inb4 - you don't need 9 killswitches
killswitches would be handy for example.... going interisland for a few days and leaving the car in an airport parking lot. going somewhere for vacation, leaving car parked for week+
#2
Honda-Tech Member
Thread Starter
Re: wiring killswitches (wire colors?)
adding to the list...
fuel pump power
injector power
ignition power
clutch-depress completes a circuit which must be closed for ignition on MT
ECU fuse circuit
locking hood w/security features under hood
most could be two-phase switches (ie - another action to enable switch as well. example: need parking lights on AND switch flipped. or... key held in start position AND blower fan on re-circulate..)
fuel pump power
injector power
ignition power
clutch-depress completes a circuit which must be closed for ignition on MT
ECU fuse circuit
locking hood w/security features under hood
most could be two-phase switches (ie - another action to enable switch as well. example: need parking lights on AND switch flipped. or... key held in start position AND blower fan on re-circulate..)
#3
Honda-Tech Member
Thread Starter
Re: wiring killswitches (wire colors?)
and if anyone knows.... will chopping switches in affect the the resistance of the circuits enough to damage any electronics?
Thread
Thread Starter
Forum
Replies
Last Post
carlos8
Honda Civic / Del Sol (1992 - 2000)
11
10-31-2013 08:32 PM