Ser1N

iTrader: (1)

I was wondering if a head gasket will hold with the missing chips seen in the pictures. I am having a hard time finding a good block. =/ All of them that I find are messed the hell up.

Blacknight117

iTrader: (1)

I'm not an expert but, from a visual perspective, no. I would get it cleaned and checked.

belairbrian

In the first picture you can see the line from where the metal part of the head gasket was.

The chip goes almost completely through that area

jbpnoman

That chip is halfway through the sleeve. I wouldn't trust it.

beecee18

I would avoid using that block at all cost.

This is a perfect example of what you will see when removing a head from a Honda that continues to have cooling problems even after every conponment has been replaced in the cooling system.

This mostly happens when running straight undistilled water without antifreeze coolant added for long periods of time.

It will not hold a headseal

Ser1N

iTrader: (1)

Thanks guys, This is the 4th block I have come across that is like this in my area. Finding a good D series block is a pain in the butt.

beecee18

Blocks suck in Yuma lol,

a buddy of mine bought a block out of yuma,

trash

Ser1N

iTrader: (1)

Everything sucks in Yuma. ha