KEEP-IT-CLEAN

POSTING THIS FOR A BUDDY ,I NEVER REALLY HAD A CHANCE TO LOOK AT IT AND WELL THIS IS THE SET UP .... JDM B20 MOTOR .. 00 CX MODEL ... HE USED THE CX HARNESS .. OBD2B TO OBD1 HARNESS TO A OBD1 LS ECU .. CONVERTED THE DIZZY HARNESS .. CONVERTED THE IACV FROM 3 TO 2 PIN ....ANYWAYS WITH A OBD2B CX ECU THE CAR STARTS FINE IDLES FINE BUT RUNS ON LIMP MODE DUE TO THE ECU BEING 3 PIN IACV (FROM WHAT I THINK I COULD BE WRONG ) AND WHEN HE SWAPS TO THE JUMPER THE CAR TURNS ON FINE REVS GREAT AND AFTER 3 MINS MAYBE LESS IT JUST SHUTS OFF .... I NEVER RAN IN TO THIS SITUATION BEFORE AND I HAVE DONE ALOT OF SWAPS AND WELL I HAVENT HAD A CHANCE TO GO CHECK IT OUT ... CAN YOU GUYS GIVE ME SOME ADVICE ....... THANKS ... FYI ALL SENSORS ARE CONNECTED AND NO CEL LIGHT ONLY IACV CODE WITH CX ECU IN WITH OBD1 LS NONE .......