22psi...
#1
Thread Starter
Join Date: Jan 2004
Location: cebu, cebu, philippines
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
22psi...
i want to boost at 22psi.... what things do i nid?? and im planning to change the block to DART blocks... do i still nee to sleeve even if im using DART blocks?
#7
Honda-Tech Member
Join Date: Jul 2003
Location: Jensen Beach, FL, USA
Posts: 1,517
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (b16aturbo1)
22 pounds on a dart block. Good luck and don't call me when your hair driyer blows your head off. I wouldn't do it but thats me. But do what you do best and try it out
Trending Topics
#8
Honda-Tech Member
Join Date: Oct 2002
Location: Escapading on my Zepplin, CA
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (EK9Greg)
if you plan on using a dart block, you might as well sell your entire engine, buy the dart block, forged internals, and maybe some turbo cams, as far as the valvetrain goes, i would suggest getting valve springs, but thats all. maybe skunk2 turbo cams.
you need a good size turbo, waste gate, blow off valve, piping, intercooler( if you want it) and a good engine management system. and a place to tune your car.
10,000$ and 100 man hours later, you have yourself a 22 PSI dart block.
you need a good size turbo, waste gate, blow off valve, piping, intercooler( if you want it) and a good engine management system. and a place to tune your car.
10,000$ and 100 man hours later, you have yourself a 22 PSI dart block.
#10
Honda-Tech Member
Join Date: Jan 2003
Location: Sacrament ho, California, United States
Posts: 2,312
Likes: 0
Received 1 Like
on
1 Post
22psi huh.. on what turbo? with what motor?
I think you should have planned a power goal.. cause you *could* boost 22psi thougha tiny *** turbo.. sure it may be blowing hot air into your motor by boosting so high, but what do you care? it's boosting 22psi
I think you should have planned a power goal.. cause you *could* boost 22psi thougha tiny *** turbo.. sure it may be blowing hot air into your motor by boosting so high, but what do you care? it's boosting 22psi
#12
H-T White Ops
Join Date: Jun 2003
Location: Nor Cal
Posts: 4,875
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (b16aturbo1)
What things do you nid?
How about some hook on phonics first. Then do a LOT of reading up on this. I'm guessing you've never even come close to doing a turbo install and now you're all Fast and Furious and want to run 22lbs of boost in a Dart block. Riiiiiiight. Do some homework before asking assenine questions like this.
How about some hook on phonics first. Then do a LOT of reading up on this. I'm guessing you've never even come close to doing a turbo install and now you're all Fast and Furious and want to run 22lbs of boost in a Dart block. Riiiiiiight. Do some homework before asking assenine questions like this.
#13
Member
Join Date: Jul 2002
Location: Chula Juana 619, CA, You Es Of A
Posts: 1,223
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (Ricey McRicerton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">A lot of money..that's what you need. You need forged rods, pistons, all kinds of ****. And awesome tuning and fuel management.</TD></TR></TABLE>
I'll agree with that. <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96hb »</TD></TR><TR><TD CLASS="quote">You should do some research on the forced induction forum. Good luck. </TD></TR></TABLE>
You should do that too.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95cxhatch »</TD></TR><TR><TD CLASS="quote"><u>i tihnk</u> you should do a lot of things b4 you do your motor.....like learn how to speak!</TD></TR></TABLE>
Your so mean. Look at your spelling. "I" should be capitalized and "tihnk" is spelled think, if that is truely what you meant to spell. I think his point comes across clearly. And if you do a quick Google search on where he's from, he's from the Philippines. Although I do agree he would need to do more research and come up with a realistic HP goal, not a PSI goal. Best of luck IslandSi and welcome to Honda-Tech, Pinoy ako.
I'll agree with that. <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96hb »</TD></TR><TR><TD CLASS="quote">You should do some research on the forced induction forum. Good luck. </TD></TR></TABLE>
You should do that too.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95cxhatch »</TD></TR><TR><TD CLASS="quote"><u>i tihnk</u> you should do a lot of things b4 you do your motor.....like learn how to speak!</TD></TR></TABLE>
Your so mean. Look at your spelling. "I" should be capitalized and "tihnk" is spelled think, if that is truely what you meant to spell. I think his point comes across clearly. And if you do a quick Google search on where he's from, he's from the Philippines. Although I do agree he would need to do more research and come up with a realistic HP goal, not a PSI goal. Best of luck IslandSi and welcome to Honda-Tech, Pinoy ako.
#14
Junior Member
Join Date: Nov 2002
Location: Valdosta, Ga, US
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (Ricey McRicerton)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ricey McRicerton »</TD></TR><TR><TD CLASS="quote">A lot of money..that's what you need. You need forged rods, pistons, all kinds of ****. And awesome tuning and fuel management.</TD></TR></TABLE>agree that he needs all kinds of knowledge and parts.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IslandSi »</TD></TR><TR><TD CLASS="quote">What things do you nid?
How about some hook on phonics first. Then do a LOT of reading up on this. I'm guessing you've never even come close to doing a turbo install and now you're all Fast and Furious and want to run 22lbs of boost in a Dart block. Riiiiiiight. Do some homework before asking assenine questions like this.</TD></TR></TABLE>
as for this
I do not think english is his first language so we should give him a break
How about some hook on phonics first. Then do a LOT of reading up on this. I'm guessing you've never even come close to doing a turbo install and now you're all Fast and Furious and want to run 22lbs of boost in a Dart block. Riiiiiiight. Do some homework before asking assenine questions like this.</TD></TR></TABLE>
as for this
I do not think english is his first language so we should give him a break
#15
H-T White Ops
Join Date: Jun 2003
Location: Nor Cal
Posts: 4,875
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (B18C2_sedan)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18C2_sedan »</TD></TR><TR><TD CLASS="quote">agree that he needs all kinds of knowledge and parts.
as for this
I do not think english is his first language so we should give him a break</TD></TR></TABLE>
Well then do a hell of a lot of reading. Makes your questions a hell of a lot better if you actually have SOME knowledge of the subject. There's a LOT of info on this site. Just read a lot of posts. Here and over on clubsi.com. I know you guys hate it because it's a ricer forum, but there are quite a few members over there that hang out in the FI forum that know their ****.
as for this
I do not think english is his first language so we should give him a break</TD></TR></TABLE>
Well then do a hell of a lot of reading. Makes your questions a hell of a lot better if you actually have SOME knowledge of the subject. There's a LOT of info on this site. Just read a lot of posts. Here and over on clubsi.com. I know you guys hate it because it's a ricer forum, but there are quite a few members over there that hang out in the FI forum that know their ****.
#16
Junior Member
Join Date: Nov 2002
Location: Valdosta, Ga, US
Posts: 720
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (IslandSi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by IslandSi »</TD></TR><TR><TD CLASS="quote">
Well then do a hell of a lot of reading. Makes your questions a hell of a lot better if you actually have SOME knowledge of the subject. There's a LOT of info on this site. Just read a lot of posts. Here and over on clubsi.com. I know you guys hate it because it's a ricer forum, but there are quite a few members over there that hang out in the FI forum that know their ****.</TD></TR></TABLE>
You hit it right on the head. Do not step up the the post plate without some basic honda skills. We agree on that. By the way are you in the airforce. I've been in the azores three or four times. I litttle island, but with some great views. Pretty hilly when you are on foot also. Peace out.
Well then do a hell of a lot of reading. Makes your questions a hell of a lot better if you actually have SOME knowledge of the subject. There's a LOT of info on this site. Just read a lot of posts. Here and over on clubsi.com. I know you guys hate it because it's a ricer forum, but there are quite a few members over there that hang out in the FI forum that know their ****.</TD></TR></TABLE>
You hit it right on the head. Do not step up the the post plate without some basic honda skills. We agree on that. By the way are you in the airforce. I've been in the azores three or four times. I litttle island, but with some great views. Pretty hilly when you are on foot also. Peace out.
#19
Unceasing Measure
Re: 22psi... (BADEG6)
I think the retension of 22psi is a better goal to shoot for than 400whp, personally. Albeit this person didn't do a good job of articulating their desire, I think maximizing the boost potential of a block should always be looked into before a specific horsepower or torque goal is set.
Just my $.02
Just my $.02
#20
Honda-Tech Member
Join Date: May 2002
Location: cali
Posts: 13,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: 22psi... (Archidictus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus »</TD></TR><TR><TD CLASS="quote">I think the retension of 22psi is a better goal to shoot for than 400whp, personally. Albeit this person didn't do a good job of articulating their desire, I think maximizing the boost potential of a block should always be looked into before a specific horsepower or torque goal is set.
Just my $.02 </TD></TR></TABLE>
why would you want a goal that has varibles in it. would it be better to have a goal that is constant
Just my $.02 </TD></TR></TABLE>
why would you want a goal that has varibles in it. would it be better to have a goal that is constant
#21
Re: 22psi... (Archidictus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Archidictus »</TD></TR><TR><TD CLASS="quote">I think the retension of 22psi is a better goal to shoot for than 400whp, personally. Albeit this person didn't do a good job of articulating their desire, I think maximizing the boost potential of a block should always be looked into before a specific horsepower or torque goal is set.
Just my $.02 </TD></TR></TABLE>
I agree to an extent.... I built a block with 25psi as a withstanding goal.... not built with a horsepower goal.... So I can understand that....
but this guy who started the post is still retarted...
Just my $.02 </TD></TR></TABLE>
I agree to an extent.... I built a block with 25psi as a withstanding goal.... not built with a horsepower goal.... So I can understand that....
but this guy who started the post is still retarted...
Thread
Thread Starter
Forum
Replies
Last Post
butterbeer2fd
All Motor / Naturally Aspirated
4
05-19-2012 11:07 PM