b18c4 turbo ( Full-Race T3/T67H.O.) - Honda-Tech


b18c4 turbo ( Full-Race T3/T67H.O.)

Reply
 
 
 
LinkBack Thread Tools Search this Thread
Old 07-24-2008, 06:50 AM   #1
Honda-Tech Member
Thread Starter
 
sir-uk's Avatar
 
Join Date: Nov 2007
Location: wolverhampton, west midlands, england
Posts: 27
Default b18c4 turbo ( Full-Race T3/T67H.O.)

Ive started a turbo build thread in the civic 92-00 section

HERES THE LINK :
http://www.honda-tech.com/zerothread/2350568

Im running a b18c4 with a full race turbo kit, with a T3/T67H.O. turbo. Ive ordered 84mm darton sleeves forit, and now im choosing what pistons to get. Im unsure of which ones to egt,and what compression ratio to run. NEED SOME HELP GUYS!!!!!!
sir-uk is offline   Reply With Quote
Old 07-24-2008, 08:17 AM   #2
Mr. Badwrench
 
boostedcivicsir's Avatar
 
Join Date: May 2002
Location: stranger in a strange land
Posts: 14,146
Default Re: b18c4 turbo (sir-uk)

540 whp on an 84mm b16 with je 9:1
710whp on an 83mm gsr with cp 9:1 both with a b16 head and that turbo.
boostedcivicsir is offline   Reply With Quote
Old 07-24-2008, 04:47 PM   #3
Honda-Tech Member
 
91redteg's Avatar
 
Join Date: Jan 2007
Location: trbho, WA, united states
Posts: 3,549
Default Re: b18c4 turbo (boostedcivicsir)

nice looked at the thread. just run 9:1 good for boost. if yur goin all out liek that u could always go 8.5:1 im not sure what pros and cons would be. goin 2.0 with the 84mm sleeves was a good idea
91redteg is offline   Reply With Quote
Old 07-26-2008, 05:18 AM   #4
Honda-Tech Member
Thread Starter
 
sir-uk's Avatar
 
Join Date: Nov 2007
Location: wolverhampton, west midlands, england
Posts: 27
Default

can someone post a link to a supplier (eg. ebay.com) with the exact pistons i'll need. was looking at cp pistons and they come in many different sizes
sir-uk is offline   Reply With Quote
Old 07-26-2008, 03:30 PM   #5
Honda-Tech Member
 
blinx9900's Avatar
 
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Default Re: (sir-uk)

what kind of fuel you plan on running? i think 9.0 is a bit low as IIRC normal fuel in UK is like 94-98 octane?
blinx9900 is offline   Reply With Quote
Old 07-26-2008, 05:09 PM   #6
Honda-Tech Member
 
flangemastermike's Avatar
 
Join Date: Jan 2006
Location: cuba
Posts: 205
Default

nah uk fuel the same as you , we use 98ron , and your crazy cats use "mon" . roughly the same.

i have 9:1 CP's , and use shell vpower fuel which is 98 ron. hope that helps
flangemastermike is offline   Reply With Quote
Old 07-27-2008, 02:01 AM   #7
Honda-Tech Member
Thread Starter
 
sir-uk's Avatar
 
Join Date: Nov 2007
Location: wolverhampton, west midlands, england
Posts: 27
Default

yee,is that with a sleeved block?? i dont wanna buy the wrong sized pistons lol with an 84mm bore size (sleeve size) what are the exact pistons i want to run?

The cp piston range

Engine Code Bore Size Compression Ratio Part Number
B16A 81.0mm (Standard Bore) 9.0:1 SC7000
B16A 81.5mm (0.5mm Overbore) 9.0:1 SC7001
B16A 81.0mm (Standard Bore) 10.5:1 SC7100
B16A 81.5mm (0.5mm Overbore) 10.5:1 SC7101
B18A1/B1 81.0mm (Standard Bore) 9.0:1 SC7005
B18A1/B1 81.5mm (0.5mm Overbore) 9.0:1 SC7006
B18A1/B1 81.0mm (Standard Bore) 10.5:1 SC7105
B18A1/B1 81.5mm (0.5mm Overbore) 10.5:1 SC7106
B18C1 81.0mm (Standard Bore) 9.0:1 SC7010
B18C1 81.5mm (0.5mm Overbore) 9.0:1 SC7011
B18C1 82.0mm (1.0mm Overbore) 9.0:1 SC7014
B18C1 83.0mm (2.0mm Overbore) 9.0:1 SC7012
B18C1 81.0mm (Standard Bore) 9.8:1 SC7015
B18C1 81.5mm (0.5mm Overbore) 9.8:1 SC7016
B18C1 83.0mm (2.0mm Overbore) 9.8:1 SC7013
B18C1 81.0mm (Standard Bore) 11.0:1 SC7110
B18C1 81.5mm (0.5mm Overbore) 11.0:1 SC7111
B18C1 82.0mm (1.0mm Overbore) 11.0:1 SC7113
B18C1 83.0mm (2.0mm Overbore) 11.0:1 SC7112
B18C1 81.0mm (Standard Bore) 12.5:1 SC7115
B18C1 81.5mm (0.5mm Overbore) 12.5:1 SC7116
B18C1 82.0mm (1.0mm Overbore) 12.5:1 SC7114
B18C5 81.0mm (Stock Bore) 11.5:1 SC7135
B18C5 81.5mm (0.5mm Overbore) 11.5:1 SC7136
B-Series 84.0mm (Standard Bore) 9.0:1 SC7020
B-Series 84.5mm (0.5mm Overbore) 9.0:1 SC7021
B-Series 85.0mm (1.0mm Overbore) 9.0:1 SC7022
B-Series 84.0mm (Standard Bore) 9.7:1 SC7017
B-Series 84.5mm (0.5mm Overbore) 9.7:1 SC7018
B-Series 85.0mm (1.0mm Overbore) 9.7:1 SC7019
B-Series 84.0mm (Standard Bore) 11.5:1 SC7117
B-Series 84.5mm (0.5mm Overbore) 11.5:1 SC7118
B-Series 85.0mm (1.0mm Overbore) 11.5:1 SC7119
B-Series 84.0mm (Standard Bore) 12.5:1 SC7120
B-Series 84.5mm (0.5mm Overbore) 12.5:1 SC7121
B-Series 85.0mm (1.0mm Overbore) 12.5:1 SC7122


which ones shall i order??


Modified by sir-uk at 3:42 AM 7/27/2008
sir-uk is offline   Reply With Quote
Old 07-27-2008, 02:46 AM   #8
Honda-Tech Member
 
blinx9900's Avatar
 
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Default Re: (flangemastermike)

Quote:
Originally Posted by flangemastermike
nah uk fuel the same as you , we use 98ron , and your crazy cats use "mon" . roughly the same.

i have 9:1 CP's , and use shell vpower fuel which is 98 ron. hope that helps
are you sure about that cause i only have access to 91 octane in california and rest of the states have 93 octane, what is that equal to in RON?
blinx9900 is offline   Reply With Quote
Old 07-27-2008, 01:22 PM   #9
Honda-Tech Member
 
flangemastermike's Avatar
 
Join Date: Jan 2006
Location: cuba
Posts: 205
Default

think i made a mistake , you should be using PON as a grading , 91 PON is roughly equal to 95 RON , google it!

http://www.btinternet.com/~mad....html
flangemastermike is offline   Reply With Quote
Old 07-27-2008, 01:26 PM   #10
Honda-Tech Member
 
flangemastermike's Avatar
 
Join Date: Jan 2006
Location: cuba
Posts: 205
Default pisotns

did you get the block sleeved your self ?, do you know there 84, if so get the 84mm ones, if your not sure and bore/hone it get the bigger ones.

B-Series 84.0mm (Standard Bore) 9.0:1 SC7020
B-Series 84.5mm (0.5mm Overbore) 9.0:1 SC7021
flangemastermike is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
F/S Garrett T3 T67 H.O hatch34 Northwest (Sales) 5 07-22-2009 07:48 PM
Full Race T3/T67 H.O. Full-Race Prostreet Manifold, Turbosmart 48mm Progate Boner_Ben Classifieds: Forced Induction 20 12-11-2006 06:58 PM
Build up suggestions boostedek9 Forced Induction 7 10-14-2006 07:36 PM
FS: Turbos, Manifolds, and Wastegates, Full-Race, T3/T67 HO, T3/T04E Full-Race Henry For Sale 47 09-29-2005 06:42 AM
DRAG Turbo Kits - $2599.99 FREE SHIPPING prostreetonline Forced Induction 50 05-28-2005 04:35 PM


Tags
b18c1, b18c4, boost, civic, cp, full, fullrace, honda, je, kits, overbore, pistons, race, t3, t67ho, turbo

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -8. The time now is 05:49 AM.



Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.