turbo, blown seals?
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: NB Canada
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
turbo, blown seals?
I just bought a second hand turbo. I noticed that it is a little wet in one spot on the exhaust side. I blew air (with my mouth) in the oil feed line and plugged the oil return line with my finger. When I did this I could hear air slowly leaking from the exhaust side of the turbo. Would this be a "for sure" sign that the seals are blown?
Thanks
Thanks
#3
Honda-Tech Member
Join Date: Oct 2006
Location: Marion, N.C., U.S.
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo, blown seals?
You cannot tell if the seals are bad by blowing through it lol
If there is oil in the hot side around the wheel then chances are it needs a rebuild. Is it a ball bearing turbo or journal bearing and how much shaft play does it have?
If there is oil in the hot side around the wheel then chances are it needs a rebuild. Is it a ball bearing turbo or journal bearing and how much shaft play does it have?
#4
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: NB Canada
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo, blown seals?
its a journal bearing turbo (precision 6262). No shaft play. There is no oil on the turbine wheel or around it. Just a bit of black that would normaly be there.
I just figured, if air can leak around there, so can oil?? But I hope your right. Thanks for the help man.
I just figured, if air can leak around there, so can oil?? But I hope your right. Thanks for the help man.
#5
Honda-Tech Member
Join Date: Oct 2006
Location: Marion, N.C., U.S.
Posts: 608
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo, blown seals?
There arent actual seals in a journal bearing turbo. It works similiar to a ring on a piston, the only time Ive had a problem with oil leaking into the hot side is when the bearings were wore causing excessive shaft play.
Thread
Thread Starter
Forum
Replies
Last Post
AzntaggeR
Forced Induction
4
06-17-2005 11:07 AM
QuickHonda
Forced Induction
3
04-17-2002 08:11 PM