POSSIBLE BAD COIL
#1
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
POSSIBLE BAD COIL
i checked the wires, plugs, compression test, map sensor, and for all boost leaks.. everything checks out good.. its a 94 integra b16 swap with a gt30r.. 2 days ago my buddy drove my car and when to shift from 3rd to 4th and hit second by accident. it over reved real bad and broke the VSS, but now when ever the car is under load, the boost breaks up.. this is the only other thing i can think of. also checked the turbo, its fine.. if anyone can give any sugg. it would be a lot of help.. thanks everyone
#4
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (turbo-crx)
i checked everything for leaks.. so you don't think its a coil.. because since it happened, its got a shitty idle to it.. and everyone i've talked to said that when honda's over rev, all that power gets back to the distibutor and blows out the coil.. that would explain the bad idle and if the coil wasn't giving enough spark under load it would break up right???, also if i ease into the gas, i can get about 10 pounds out of it before it breaks up, the ecu is set for 17psi and the waste gate is 9.. even running off the waste gate it still does it... thanks
#6
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (HMTforlife)
yeah.. i ordered a new msd coil for the car.. i know its a long shot but i can't think of anything else.. i'll let you know if it helps anything
#7
Honda-Tech Member
Join Date: Nov 2007
Location: NC, United States
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gt30rintegra)
Buying parts and using that as a way to find a problem can become kinda expensive. As the guys have said,
1) Check your timing (Mechical and with a Timing light) if that all checks out,
2) Compression Check
3) Leakdown Test
If all the above check are fine this will eliminate alot of possiables,
On the coil thing I have never heard that before sounds like some BS.
Have you pulled you plugs?
1) Check your timing (Mechical and with a Timing light) if that all checks out,
2) Compression Check
3) Leakdown Test
If all the above check are fine this will eliminate alot of possiables,
On the coil thing I have never heard that before sounds like some BS.
Have you pulled you plugs?
Trending Topics
#8
Junior Member
Join Date: Dec 2006
Location: Burlington, WI
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
probably the shitty msd coil. mine failed on my turbo Integra conveniently while i was trying to sell it with only about 5k on the coil. it would break up in boost real bad and had a misfire at idle. i would say go back to stock ignition and see if that fixes it
#9
Do you have the stock coil inside the dizzy still? If so then bypass the MSD coil and try that before buying a new one.
A leakdown test is best to check as I think you may have bent a valve or some valves actually
A leakdown test is best to check as I think you may have bent a valve or some valves actually
#10
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostfed.com)
yeah like i've said i've done the leakdown test, checked the plugs and everything.. the coil is stock i'm pretty sure.. i ordered a msd coil... because like i said i heard alot of people saying that it goes like 94teg said.. ha but apparenly msd coils are shitty ha
#11
Re: (gt30rintegra)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gt30rintegra »</TD></TR><TR><TD CLASS="quote">yeah like i've said i've done the leakdown test, checked the plugs and everything.. the coil is stock i'm pretty sure.. i ordered a msd coil... because like i said i heard alot of people saying that it goes like 94teg said.. ha but apparenly msd coils are shitty ha</TD></TR></TABLE>
You stated above that you did a compression test and you checked for leaks, that is not a Leakdown test . You need to use a Leakdown tester with compressed air, it will determine if you have bent valves
You stated above that you did a compression test and you checked for leaks, that is not a Leakdown test . You need to use a Leakdown tester with compressed air, it will determine if you have bent valves
#12
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostfed.com)
oh ok sorry about that.. i was confused. ok well ill do the leakdown test and hopefully its not the valves.. i just don't understand how i can still hit 10psi easing into the gas but not hit 17.. becuase wouldn't the car run shitty if the vlaves where bent.. the car rights fine normally, and when boosted alittle it seems like it had all the power it did before.. it just only does it at full throttle
Modified by gt30rintegra at 6:08 AM 6/18/2008
Modified by gt30rintegra at 6:08 AM 6/18/2008
#15
HT White Ops
iTrader: (4)
Join Date: Oct 2005
Location: Ova Thur, United States
Posts: 6,116
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Boostfed.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com »</TD></TR><TR><TD CLASS="quote">
You stated above that you did a compression test and you checked for leaks, that is not a Leakdown test . You need to use a Leakdown tester with compressed air, it will determine if you have bent valves
</TD></TR></TABLE>
or bad rings.
You stated above that you did a compression test and you checked for leaks, that is not a Leakdown test . You need to use a Leakdown tester with compressed air, it will determine if you have bent valves
</TD></TR></TABLE>
or bad rings.
#16
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (SD_Lurker)
dude tell me about it.. i let him take it to his work because he didn't have a car, any other time i would say no, but the one time i do they gotta f*ck **** up
#17
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gt30rintegra)
ok put the new coil in today and absolutly nothing changed.. but i think i know what it is now.. the 2 step that i have on the car, i can put it to wahtever rpm, then punch it and the 2step will go.. but since my v.s.s is broken, it always reads at 0 mph.. so when i totally go wot, i think the 2 step goes off... becuase at any other throttle position i can hit boost fine.. any one have any other suggestions??? by the way are the vss's really like 400 bucks??? anywhere i can find one cheaper????
#18
Honda-Tech Member
Join Date: Jan 2005
Location: b00sting my D16s, SoWis, USA
Posts: 7,015
Likes: 0
Received 7 Likes
on
5 Posts
Re: (gt30rintegra)
Junkyard? Your VSS was used, so why would another used VSS be such a bad idea? You can tell instantly if its bad, and 2-3 used VSS's are far cheaper than a new part.
Also a cheap ebay leakdown tester isn't that expensive. Have your friend buy it for you, and test it out. Either that or have him buy the VSS. In my world, if you break it, you buy it!
Also a cheap ebay leakdown tester isn't that expensive. Have your friend buy it for you, and test it out. Either that or have him buy the VSS. In my world, if you break it, you buy it!
#19
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (HiProfile)
you are completely true man.. and you best believe that he is buying me whatever parts i need.. i want the car back on the road so bad.. thanks alot
#20
Thread Starter
Join Date: May 2008
Location: Doylestown, pa, 18901
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gt30rintegra)
ok new update... got a vss outta a junk yard and put in and speedo works, and its back at 17 psi again.. thanks to everyone who helped out!!!!
#21
Re: (gt30rintegra)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gt30rintegra »</TD></TR><TR><TD CLASS="quote">ok new update... got a vss outta a junk yard and put in and speedo works, and its back at 17 psi again.. thanks to everyone who helped out!!!!</TD></TR></TABLE>
Glad you got it solved! How much did the VSS cost you ?
Glad you got it solved! How much did the VSS cost you ?
Thread
Thread Starter
Forum
Replies
Last Post
Chuck Dean
Forced Induction
4
03-17-2004 10:16 PM
Doodoo
Forced Induction
8
08-15-2001 04:28 AM