Decided to keep the TEGGY!
#1
Junior Member
Thread Starter
Join Date: Jul 2006
Location: NJ
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
Decided to keep the TEGGY!
Whats going on. ive decided to keep my turbo project. was going to get a vw.. but then i realized that i wanted to make some power haha..so i decided to keep my integra. Just ordered a gsr tranny with lsd!.. axles comming in next week. and my peakboost top mount turbo manifold will come in aswell. Im shooting for 400whp on 93 octane. heres my setup. let me know if i will reach my goal.
b18b block(stock sleeves)
Eagle ls lightweight crank
eagle rods
cp 9.8:1 pistons
arp studs
acl rod bearings
b16 head(stock)
2000 integra type r cams
gold eagle cam gears
aem fuel rail
rc 750's
aem adjustable fuel pressure regulator
b16 throttle body
gm 3bar map sensors
front mount intercooler
tial 50mm bov
tial 38mm wastegate
innovative motorsports 30r
ebay manifold
3 inch turbo back
skunk 2 intake manifold
chromed ecu
i think thats it... i may be forgetting something. but thats the gist of my setup.. do you think ill reach my power goal? if not what else should i be looking at to reach that power goal?
b18b block(stock sleeves)
Eagle ls lightweight crank
eagle rods
cp 9.8:1 pistons
arp studs
acl rod bearings
b16 head(stock)
2000 integra type r cams
gold eagle cam gears
aem fuel rail
rc 750's
aem adjustable fuel pressure regulator
b16 throttle body
gm 3bar map sensors
front mount intercooler
tial 50mm bov
tial 38mm wastegate
innovative motorsports 30r
ebay manifold
3 inch turbo back
skunk 2 intake manifold
chromed ecu
i think thats it... i may be forgetting something. but thats the gist of my setup.. do you think ill reach my power goal? if not what else should i be looking at to reach that power goal?
#2
iTrader: (2)
Re: Decided to keep the TEGGY! (OneCrzySetup)
400 shouldn' t be an issue. Make sure you pressure test all of your charge piping for boost leaks etc.
One thing I would change is the engine management to Hondata, Neptune or eCtune. Crome will work but it isn't going to be the best solution.
One thing I would change is the engine management to Hondata, Neptune or eCtune. Crome will work but it isn't going to be the best solution.
#4
Honda-Tech Member
Join Date: Apr 2008
Location: Parrish, FL
Posts: 1,300
Likes: 0
Received 0 Likes
on
0 Posts
get rid of the ebay mani! all that nice stuff and a crap manifold....
I'm selling a spoolin performance cast mani/dp/dumptube package that is brand new and 2000* painted.
I'm selling a spoolin performance cast mani/dp/dumptube package that is brand new and 2000* painted.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
streetracer6rpt
Forced Induction
12
06-18-2007 07:12 PM