Need a Map for b20.
#1
Thread Starter
Join Date: Sep 2003
Location: Washington, USA
Posts: 301
Likes: 0
Received 0 Likes
on
0 Posts
Need a Map for b20.
Hey guys, I'm gonna be swapping a B20 in the next couple weeks, and I've just about have everything I need together.
Just bought a obd1 p75 ecu in the marketplace, that's running a turbo program using crome. I'll be staying NA, and lightly modded, so I'm gonna need some type of base map.
Would a stock P75 map work fine for I/H/E/mani/tb? Anyone able to supply me with a ROM?
Thanks,
Just bought a obd1 p75 ecu in the marketplace, that's running a turbo program using crome. I'll be staying NA, and lightly modded, so I'm gonna need some type of base map.
Would a stock P75 map work fine for I/H/E/mani/tb? Anyone able to supply me with a ROM?
Thanks,
#3
Honda-Tech Member
Join Date: Oct 2002
Location: chicago burbs, Il, USA
Posts: 5,150
Likes: 0
Received 23 Likes
on
23 Posts
Re: Need a Map for b20. (jry2598)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jry2598 »</TD></TR><TR><TD CLASS="quote">just take the chip out then u can just run the ls basemap...</TD></TR></TABLE>
that would work great, all though the B18B map would run the B20 lean, and the ignition maps are not quite right... so I guess it wouldn't be good at all.
OP: there are B20 maps out there you can download. Check xenocron's site for some good basemaps.
that would work great, all though the B18B map would run the B20 lean, and the ignition maps are not quite right... so I guess it wouldn't be good at all.
OP: there are B20 maps out there you can download. Check xenocron's site for some good basemaps.
#5
moderator emeritus
Re: Need a Map for b20. (Bac91Da)
if it was uploaded by xenocron, then i'm sure it would work as long as the motor is in the general playing field as yours.
all you need a basemap for is startup. Tune from the ground up and you'll never have problems with "basemaps"
all you need a basemap for is startup. Tune from the ground up and you'll never have problems with "basemaps"
#6
Honda-Tech Member
Join Date: Jul 2004
Location: I'm everywhere Focker
Posts: 5,463
Likes: 0
Received 2 Likes
on
2 Posts
Re: Need a Map for b20. (98vtec)
I recently tuned a B20 hatch that ran an LS basemap. While his car didn't run too bad, his idle was ****. I retuned it and he hasn't had a problem since. I have a B20 bin if you can't find it. PM me if you can't find it anywhere.
#7
Junior Member
Join Date: Dec 2007
Location: Miamisburg, Oh, USA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need a Map for b20. (RC000E)
my idle is fine i just have some backfire cause i have injectors that flow 10% more than stock and i have an adjustable fuel pressure regulator as bandaids for now so i am running a lil rich. But i would like to get the ecu chipped and tuned so i can get it running 100%
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2008
Location: Itasca, IL
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need a Map for b20.
Go here---> http://www.xenocron.com/bins/index.p...Crome/B-Series
Download the treyb20.bin
It's a stock B20 map that I just personally tried loaded onto my ostriche. I run a B20 OBD1 P75 with an LS trans. This finally got me through some mid range bog issues.
I'll try to keep you updated as I make this map my own.
Download the treyb20.bin
It's a stock B20 map that I just personally tried loaded onto my ostriche. I run a B20 OBD1 P75 with an LS trans. This finally got me through some mid range bog issues.
I'll try to keep you updated as I make this map my own.
Thread
Thread Starter
Forum
Replies
Last Post