legomytego

everything obo also looking for turbo parts for trades email me vdodd45@yahoo.com
0 miles on everything just picked this up from tempest racing last weekend

tsx k24a2 head $1200obo spent $730 on just machine work
new supertech valve train
new valve guides
new seals
head was decked
performance valve job
stock cams included
valve cover included

k20z1 block $2200 obo spent $1000 on just machine work.
cp pistons 9.0.1
86.5 mm bore
eagle h beam rods
crank micropolished/inspected
bearing clearances already done for you
bore/hone
oil pan included
front cover included



trades we are looking for
id injectors 1000cc or 2000cc
tial bov black or purple
tial wastgate 44mm black or purple
s300 with boost option
gsr victor x intake manifold
98-01 integra front end
engine bay harness if you custom make them email me

V-SPEC 1

Fluidampr race pulley for B series used but in mint condition $300 shipped.

JTauto

AFI Forward facing exhaust manifold T4 twinscroll twin 44mm wg used for one season. $850.00 plus shipping and paypal fees.



Precision W/A core 1000hp with custom water tank and Rule pump inside, setup is very efficient stays nice and cold. Has 3.5 intake pipe and 3 inch inlet from hot side. Complete setup $800.00

Blueberry1320

B-series

Full-race top mount manifold
1000
Gsr head -ported ,springs ,retainers
600
Msd dig.6 coil,box,cap
350
Eg aluminum charge pipes w/bov
300
B16 tranny(local pick up)
450

Txt 347-219-2026 for pic n info

C.R.E.A.M.*562*

PMed

JonathonTheZombie

FS: Used Garrett T4 T67 High Output Turbo. Purchased originally through Full-Race years ago.

Specifications as follows:

-T4
-Journal Bearing
-.70 A/R Compressor Housing
-.89 A/R Exhaust Housing w/VBand Exhast (Clamp not pictured but included)
-800-1K Miles (Mostly track use only)
-Compressor Housing Powder Coated Mirror Black (just done a couple weeks ago)

Price: 515.00 Shipped (within the 48 states)






Contact: Tyler
Phone: 541-570-5071
Email: NWRacingscene@yahoo.com

I can take more pictures upon request. Please contact me if you have any questions or need further information.

rogueeg6

iTrader: (1)

I have a BNIB Stroud window net. 30$


Polished B16 Fuel rail. w/6an fitting 10$


S3 Magazine fif shift **** SOLD

AutoMeter water temp, boost, and oil temp SOLD

Purple anodized HillCo fasteners beauty washers 30$



10an Line separators 15$


MSD RPM Pills and billet holder

IMPORTMyth01

Parts are located in Columbus, GA
706-577-3364 Ray

Complete LS Block w/Skunk2 Manifold $500
Fresh Rebuild with 0 Miles, comes with Alternator (OBD2), Distributor(OBD1), Sensors



Crower 62403-2 Non-Vtec Cams $200




AEM TRU Time Polished Cam Gears $100
Great Shape


ARP LS Head Studs $100
Brand New in Box, Never been removed from box


Ebay Ram Horn Manifold $50
Has a slight crack in front of collector, doesnt leak and just havent gotten around to having the manifold retiged andpressure tested.


Blox T3 Turbo Manifold $80


Turbonetics T3/T4 Turbo $250
Good shape, 10k miles at 10psi, virtually no play




Tial 38mm Polished Wastegate $100
10PSI spring I believe


Shift Linkage $100
Comes with ebay short shifter


RevHard Intercooler $150
31x6.5x3 2.25" End Tanks


Mid Shaft $50


Brand New MSD 6AL $100
Mounted never used


B Series AC Compressor Bracket and Front Trans Mount (P30) $60


B Series Rear T Bracket $50


Chipped LS ECU $100
Chipped with Hondata Plug, Comes with GSR Turbo base map

GSR Hydro Trans SOLD
B Series 400hp Axles SOLD
STR Bronze Fuel Rail SOLD
Brand New RC 750cc Injectors SOLD

JSTANOTHERHONDA

Have a couple things for sale Prices posted do not include shipping or fees.

- 83mm Darton sleeved b18a1 block selling just the bare block. $900





-NSR tech ramhorn manifold T3 38mm WG non AC $400 no crack perfect condition.


GSP GT35 Turbo T3 .63a/r 70 trim 4 bolt DP no miles on it $350



If you have questions I can be contacted via PM or at 7752912116 if you want to make an offer on something just shoot me an offer.

justnprsh07

Contact Justin at (706) 587-7278 Everything is OBO and negotiable!!!

H22 88mm wiseco pistons $110 shipped
[IMG][/IMG]

H22 AEM cam gears $50
[IMG][/IMG]

H22 carbon fiber plug cover $30 [IMG][/IMG]

H22 AEM fuel rail $50
[IMG][/IMG]

AEM FPR $75 [IMG][/IMG]

Precision 100hp core liquid to air intercooler setup $400
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]


H22 turbo manifold $400
[IMG][/IMG]

EF'n Sedan

iTrader: (1)

(2) Used 24.5x9x13" M/T's....$200!

sc34dx

Sup guys selling a FullBlown dual walbro pump set up for eg/Ek/dc2 comes with two walbro 255 pumps and the fittings on the top and wires...it has one season on it I will take pics tomorrow..asking $400 obo
I'm located in Chicago suburbs
Thanks
Erick

tenthelementracing.com

For Sale:
Precision Turbo GT4272R Turbo, 15 passes on it. $2500 OBO plus shipping.



Pm me if interested.

b20vtech

Whats up H-T!

Im selling my turbo kit from my Honda B-series engine, its a nice decent put together turbo kit, never gave me any problems what so ever, always spooled nice and fast and has been really reliable.
The turbo still have low mileage, roughly around 5-6K miles, with normal minimum shaft play. This is a great kit for the street or at track, I had it Dyno tuned here at a local shop on my stock B20v engine and it pumped out 293whp/225tq. on only 8psi, plenty more
to go!!

The turbo kit consist of;

-T3T4 Garrett 57 trim turbo (capable of 400+whp)
-Custom made Ramhorn turbo manifold
-Custom 3" downpipe w/ 3" Y bypass pipe and a 3" flex pipe ( I do have a 3" DMH e-cut out but sent it back for a new replacement, if you want it, its 120bucks extra when I get it back)
-1.75" dump tube
-Tial 38mm wastegate with a 8lb. spring inside
-Big front mount Intercooler with complete charge pipes, blow off vale, hose, clamps and couplers
-Walbro 255 high flow fuel pump
-B&R fittings oil feed & return lines

This kit is about 99% complete with a added fuel pump and Y bypass pipe, only thing missing is the fitting for the oil return line that was welded onto my oil pan.
I am asking only $1500obo for this kit, buyers handle shipping fee's im also paypal certified, you will not be dissapointed on how this kit performs!



Here's a quick video right off the dyno on 8psi
http://www.youtube.com/watch?v=5qqQPKiJzBk

Ls_dx

iTrader: (5)

Comp 8026-1420 stage 5 rigid b series hydro

330 shipped/PayPal




also have 2 brand new in the box
black full-race 38mm MVS gates with
all springs 520 shipped PayPal

turbos362

-DART 84x89 short block. CP, pauter rods, LS crank, ACL bearings, Golden Eagle head studs, ATI crank pully, and more (under 100 miles ) $3900.00 picked up

for pictures and more info email turboc1@sbcglobal.net

WHTZ

FS: Danny Fab (DB) Sidewinder Turbo manifold T3 with downpipe $800. Flanged for a Tial 44mm or 46 Precision wastegate...

Manifold holds boost no problem till redline with '0' spiking
Never one time cracked
Tuned on a stock motor making 600+ tuned by Chris Treblic
10.49@ 140

drocto3000

Name: jeremy
Location: kansas city, mo
Means of contact: text (816)984-9250
email- jeremiahleepatton@gmail.com
or p.m me
Price:$ 3700
drag cartel 105 strokerkit k series 90mm bore 15:3:1 comp
everything is brand new lmk if you have any ?s or want more pics, thanks jeremy

[IMG]http://i45.photobucket.com/albums/f63/drocto3000/mail1-1.jpg[/IMG

S@nt0s

Mickey T ET streets 235/60/15 (26x9) ou 2 dyno sessions no wear on them still look new zero street miles

$280 pair
They go for $180 each
Located in Compton,Ca

GT40eg

prices do not include shipping or paypal fees. im going work on getting pics up in the next couple days. if you want a faster response or pics text me at 443-962-0628


Full-race dual back door intercooler $600
Full-race polished intake manifold w/72mm BDL throttle body $750
Full-blown dual pump hangar $250
Full-race twin scroll top mount twin 44s $1050
3”to 4” downpipe to go with manifold $250
LS crank $100
Magnafuel fuel pressure regulator $80
Ported GSR head no valvetrain $800
BC stage 3 cams $350
Supertech full valvetrain everything $650
Weld skinnies polished with tires $1000
Morso 5.5 quart oil pan $300
Ferrea cams/rockers/t1 block off plae $1400
4” exhaust with vibrant muffer $350
4” vibrant muffler with v-band on one side $60
ID 2000cc injectors $800

h2b_sedan

mint k20 6spd trans. this trans has NO grinds. 75kish miles. always used honda MTF. turboed my car and switched to a ep3 5spd. doesnt have the speed sensor anymore
asking $700