B16a ITR Cams help valve spring question
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: Westport, MA, USA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
B16a ITR Cams help valve spring question
Hey guys I have JDM B16a and I have a ITR Cams can I run the cams with the stock valve springs or do I need to have my duel springs put in???
#2
Honda-Tech Member
Join Date: Mar 2007
Location: Mobile, AL, US
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16a ITR Cams help valve spring question (F4i)
I have a friend with JDM B16a installed ITR intake cam with stock intake springs with no issues for 2 years now. You might need the dual valve springs on the exhaust side.
#3
Honda-Tech Member
Join Date: Sep 2007
Location: L'ville, GA
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16a ITR Cams help valve spring question (F4i)
you'll be fine but if you wanna make power i suggest you build it
also if you didnt know the jdm heads come with dual springs on the intake side
also if you didnt know the jdm heads come with dual springs on the intake side
#4
Junior Member
Thread Starter
Join Date: May 2004
Location: Westport, MA, USA
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Re: B16a ITR Cams help valve spring question (ej1252)
Yeah I have another built head but I dont plan on putting it on for a little while so I just want to slap the ITR cams in for now....
#7
Re: B16a ITR Cams help valve spring question (JakeSpec)
Just keep the stock redline and you should be fine, but be careful cause if you over rev you might drop a valve. So be careful
Thread
Thread Starter
Forum
Replies
Last Post
austrian type-R
Acura Integra Type-R
1
06-18-2003 03:39 AM