New2Honda1990

Hey I recently got a civic with a d16y7 in it, I was wondering if at all possible and if so the best way to go about getting around 300 whp out of it?

Runnerdown

Pressurize the inlet side of the engine with a device called a turbocharger.

Project_EK

iTrader: (1)

Not possible N/A with your current motor! if you want 300 whp N/A look into a k24. if you want to stay with the SOHC a piston/rod turbo set up will get you there.

93egSLEEPER

About 20-25psi will do the trick w/ a vitara piston setup

ChrisCoupe1

With Your engine you could gain about 15-30 WHP if you built it up NA for around $2,000 in parts and tuning but to get to 300 WHP which means nearly tripling your current WHP then only Forced Induction can do it on that engine and you would need to drop close to $5500 if you wanted a car that could last more then a week at that power level.

RobbieG35

Another vote for boost. Use the search function. There is a ton of information in here to help get you pointed in the right direction. Good luck!

EsotericImage

iTrader: (8)

wunfstgsr

4piston

I have a nice nitrous kit for sale? Ha ha.

ChrisCoupe1

Ha I think we have scared him off since there has been no reply from him lol....Time to lock an throw away the thread?

OMG

You can probably get 220-230whp with a 80x90 D-series

much more would require trick fuel