v-tec not working
01-20-2005, 05:23 PM
#1
Thread Starter
Join Date: Jan 2005
Location: Albuquerque, nm
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
v-tec not working
i just put a b16sir2 in my 90 integra and i cant get v-tec to work there is no check engine light on and i checked my ground and syleniod they are fine can anyone help me?
01-20-2005, 06:20 PM
#2
Honda-Tech Member
iTrader: (2)
Join Date: May 2003
Posts: 4,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: v-tec not working (sick95civic)
Its VTEC and solinoid.
I dont understand how you can not be getting a code? aside from no VTEC does it seem to run fine? are you sure the solinoid is getting oil pressure? power?
I dont understand how you can not be getting a code? aside from no VTEC does it seem to run fine? are you sure the solinoid is getting oil pressure? power?
01-20-2005, 06:53 PM
#4
Honda-Tech Member
iTrader: (2)
Join Date: May 2003
Posts: 4,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: v-tec not working (sick95civic)
Are you being sarcastic?
Well if you have power, a constant ground and full oil pressure on the solinoid and no codes it must be working fine.
What makes you think its not working?
If you have a stock GSR its not loud with the oem intake.
Well if you have power, a constant ground and full oil pressure on the solinoid and no codes it must be working fine.
What makes you think its not working?
If you have a stock GSR its not loud with the oem intake.
Trending Topics
01-20-2005, 07:15 PM
#8
Honda-Tech Member
iTrader: (2)
Join Date: May 2003
Posts: 4,284
Likes: 0
Received 0 Likes
on
0 Posts
Re: v-tec not working (sick95civic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sick95civic »</TD></TR><TR><TD CLASS="quote">i dont know you tell me, its not stock and if you drive vtec cars you can feel when vtec works </TD></TR></TABLE>
OK, well considering most vehicles I have owned i have put a VTEC motor in or have come with one from the factory I would assume I know what it feels and sounds like.
Well you need to give more info.
You have sid it has no codes and all groungs are good, oil pressure is good and the solinoid is working, what else can i tell you.
Are you sure your wiring is 100% correct?
OK, well considering most vehicles I have owned i have put a VTEC motor in or have come with one from the factory I would assume I know what it feels and sounds like.
Well you need to give more info.
You have sid it has no codes and all groungs are good, oil pressure is good and the solinoid is working, what else can i tell you.
Are you sure your wiring is 100% correct?
01-20-2005, 07:20 PM
#9
Honda-Tech Member
Join Date: Aug 2002
Location: Buckhead,GA
Posts: 2,528
Likes: 0
Received 0 Likes
on
0 Posts
Re: v-tec not working (kid-honda)
Bad solenoid? What is the ID code on the side of the ecu? Are you letting it warm up? Also with a B16 Vtec isn't that loud or real noticeable unless you are using different cams.
01-20-2005, 07:33 PM
#11
Join Date: Mar 2004
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Re: v-tec not working (97itr86)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97itr86 »</TD></TR><TR><TD CLASS="quote">Bad solenoid? What is the ID code on the side of the ecu? Are you letting it warm up? Also with a B16 Vtec isn't that loud or real noticeable unless you are using different cams.</TD></TR></TABLE>
that's my guess
that's my guess
Thread
Thread Starter
Forum
Replies
Last Post
red-eg6
Honda Civic / Del Sol (1992 - 2000)
6
07-13-2005 11:25 PM
b16mike
Honda Civic / Del Sol (1992 - 2000)
9
05-13-2005 09:51 PM