Clutch putting lots of pressure on gears
#1
Thread Starter
Join Date: Apr 2002
Location: Nashua, NH
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Clutch putting lots of pressure on gears
Hi everyone,
I havn't posted here in a while, but I had a problem come up recently with my clutch. I have a 95 gsr with 99k miles and I recently noticed my clutch feels like its putting more pressure on the gears when I have the clutch engaged. Its also is a lot harder to **** gears. Sometimes when I am sitting at a light in first gear with the clutch in, the tranny feels like it grabs the gear for a split second and the car almost stalls. I don't think its a problem with just wear and tear on the clutch since it grabs a lot lower to the floor now. Anyone have any ideas? Thanks for you help
I havn't posted here in a while, but I had a problem come up recently with my clutch. I have a 95 gsr with 99k miles and I recently noticed my clutch feels like its putting more pressure on the gears when I have the clutch engaged. Its also is a lot harder to **** gears. Sometimes when I am sitting at a light in first gear with the clutch in, the tranny feels like it grabs the gear for a split second and the car almost stalls. I don't think its a problem with just wear and tear on the clutch since it grabs a lot lower to the floor now. Anyone have any ideas? Thanks for you help
#4
Honda-Tech Member
Join Date: Jul 2002
Location: Mrs. Sauga, Ontario, Canada
Posts: 1,445
Likes: 0
Received 1 Like
on
1 Post
Re: Clutch putting lots of pressure on gears (acatak)
Check the hydraulic system, how' the clutch fluid level? If it's low check for master slave cylinder leak. For master look under the dash and check to see if there is any fluid leakage from under the black cup seal. For slave you're gonna have to remove 2 bolts that hold the slave onto the tranny and inspect for leakage.
#5
Thread Starter
Join Date: Apr 2002
Location: Nashua, NH
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch putting lots of pressure on gears (stumpyf4)
Clutch fluid level is fine, but Im going to try changing it. I really hope its not the clutch becasue Im going to sell the teg after this school year, and I just dropped $1500 on new brake pads, rotors, and calipers. But this problem came out of no where and my clutch had felt excellant before this happened. Even when my mechanic drove the car he said it felt fine. Any other ideas or am I really looking at a new clutch?
#6
Honda-Tech Member
Join Date: Jul 2002
Location: Mrs. Sauga, Ontario, Canada
Posts: 1,445
Likes: 0
Received 1 Like
on
1 Post
Re: Clutch putting lots of pressure on gears (acatak)
If the hydraulic system is okay then you're probably gonna have to deal with a broken clutch disc. The hub pieces and springs are know to come apart in certain areas and will not allow the clutch to disengage completely... check out this thread.
https://honda-tech.com/zerothread?id=1659690
https://honda-tech.com/zerothread?id=1659690
Trending Topics
#9
Thread Starter
Join Date: Apr 2002
Location: Nashua, NH
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
Re: Clutch putting lots of pressure on gears (stumpyf4)
Havnt tried it yet... I will do it next week when Im home... ill let you know the results. any other ideas in the meantime?
Thread
Thread Starter
Forum
Replies
Last Post