HELP ON TAKING PINS OUT OF THE PLUGS

Reply Subscribe

Thread Tools

Search this Thread

Jun 24, 2004 | 04:49 PM

mdj_ge

Thread Starter

Junior Member

Joined: May 2004

Posts: 348

Likes: 0

From: At your Door, CA, USA

HELP ON TAKING PINS OUT OF THE PLUGS

Who knows how to take out the pins out of the obd1 and obd2 engine harness plugs???

Jun 24, 2004 | 04:59 PM

JDMotive

Joined: Feb 2004

Posts: 799

Likes: 0

From: houston, tx, usa

Re: HELP ON TAKING PINS OUT OF THE PLUGS (yangja)

It's pretty easy for the harness plugs.You have to have enough light to see into the plug where the pin is.You'll see a little clip holding it in.You just have to take a pin removal tool,a tiny flathead screwdriver you buy frmo electroni stores or a bent paperclip and push the clip its hung up on back,than the pin should slide right out.You do it from the plug side,not the wire side.Also,some pins on the harness only require you to push them back and than down.

Jun 24, 2004 | 10:24 PM

Katman

Honda-Tech Member

Joined: May 2000

Posts: 6,094

Likes: 6

From: PASADENA, CA, USA

Re: HELP ON TAKING PINS OUT OF THE PLUGS (yangja)

obd1...

obd2...

Jun 24, 2004 | 11:17 PM

hondaZvic

Honda-Tech Member

Joined: Jun 2002

Posts: 6,944

Likes: 1

From: tx

Re: HELP ON TAKING PINS OUT OF THE PLUGS (Katman)

yeah, its easy, i usually use a safety pin. works good for me...

man.. katman, u have the best pix. barnone!

Jun 25, 2004 | 11:21 AM

Adam.

Honda-Tech Member

Joined: Jan 2002

Posts: 5,690

Likes: 0

From: 13.9 at 101.76mph, 2420lbs, FL, USA

Re: HELP ON TAKING PINS OUT OF THE PLUGS (hondaZvic)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaZvic »</TD></TR><TR><TD CLASS="quote">yeah, its easy, i usually use a safety pin. works good for me...

man.. katman, u have the best pix. barnone!

</TD></TR></TABLE>

I've also used a safety pin.