dyno numbers for ls/vtec w/sc61
the setup is old worn out stock ls bottom end(180k) with stock b16 head:
sc61
Complete engineering manifold
complete engineering IC (equal to xs engineering)
hondata
75# injectors
profec a boost controller (i have no idea how to mess with this thing, had to put it at .7 to run a 1.0bar.
Numbers at 10psi are 315.4 hp 229.0 torque
numbers at 15psi are 358.4 hp 263.7 torque
a/f is around 12-12.2 to 1 under full boost

sc61
Complete engineering manifold
complete engineering IC (equal to xs engineering)
hondata
75# injectors
profec a boost controller (i have no idea how to mess with this thing, had to put it at .7 to run a 1.0bar.
Numbers at 10psi are 315.4 hp 229.0 torque
numbers at 15psi are 358.4 hp 263.7 torque
a/f is around 12-12.2 to 1 under full boost

quick tune type of deal and this is my first time to dyno tune a car so it was different. I just added some more fuel up top to compensate for the added boost and it looked safe..... when i have some more time and money i will tune it out better.
philip
philip
Smarter than you
iTrader: (1)
Joined: Apr 2001
Posts: 8,240
Likes: 2
From: Third Coast, united states
Nice job phillip. 
coming out wednesday night w/ Allen? you guys should come check out Wasabi if you can make it out early enough.. WET T-SHIRT CONTEST and free food!
How many lbs were you running when you ran the 12.39 in shreveport?

coming out wednesday night w/ Allen? you guys should come check out Wasabi if you can make it out early enough.. WET T-SHIRT CONTEST and free food!
How many lbs were you running when you ran the 12.39 in shreveport?
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by philipwight »</TD></TR><TR><TD CLASS="quote">when are you getting back in the game?
</TD></TR></TABLE>
never .. he's scared
</TD></TR></TABLE>
never .. he's scared
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racinskittle »</TD></TR><TR><TD CLASS="quote">damn! Nice numbers!! Congrats man! THose are some great numbers!
Great job!
</TD></TR></TABLE>
Great job!
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by philipwight »</TD></TR><TR><TD CLASS="quote">when are you getting back in the game?
</TD></TR></TABLE>
Im coming back soon Bro. You've inspired me. I almost wish I hadn't have sold everything, but then again. Eveyone knows how I am. I bouhgt a few more items this time hopefully that can help me not blow things up..hehehe Good job again "P"
</TD></TR></TABLE>
Im coming back soon Bro. You've inspired me. I almost wish I hadn't have sold everything, but then again. Eveyone knows how I am. I bouhgt a few more items this time hopefully that can help me not blow things up..hehehe Good job again "P"
Awesome numbers man...glad to be one of the lucky viewers to see the dyno in person...the baseline run was amazing...then about 4-5 quick runs later an amazing 358.4hp/263.7 and the crowd went wild...now i kinda just wanna keep everything and see how mine does
(definatly not as outrageous but hopefully worthy)
(definatly not as outrageous but hopefully worthy)
Thread
Thread Starter
Forum
Replies
Last Post
2phast
Forced Induction
22
Aug 29, 2005 06:36 PM




