Im hooking up the Vortech 12-1 FMU and need directions. Im pretty sure the top valve is a vacuum but what about the 2 bottom, the middle and side bottom ones, thanx or any info.

 

Top port is Vacuum
Side port is Fuel in(from fuel rail)
Bottom port Fuel out

 

Which line is that? The actual line between the fuel filter and rail or the one coming from the fuel pressure egulator to the fire wall?

 

go here https://honda-tech.com/zerothread?id=635014

there are pictures to demonstrate

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kholmes &raquo;</TD></TR><TR><TD CLASS="quote">Which line is that? The actual line between the fuel filter and rail or the one coming from the fuel pressure egulator to the fire wall?</TD></TR></TABLE>

b/w the fuel filter and rail you can put an inline pump.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kholmes &raquo;</TD></TR><TR><TD CLASS="quote">coming from the fuel pressure regulator to the fire wall?</TD></TR></TABLE>

This is the one you use for the Fmu

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kholmes &raquo;</TD></TR><TR><TD CLASS="quote"> The line between the fuel filter and rail</TD></TR></TABLE>

Like charlesinturbocharge said this is where you would install an Inline Pump.

 

Actually Im using a n tank 255 deal. But I it all set up, thanx for all the help, I was getting anxiuos