I am located in Toronto, consider shipping to where you are before making offers.
Bosch fuel pump accepts -6out
KN oil filter new, with safety wire nut, fits B18 - not sure whatelse
Oil filter sandwich adapter with npt to -10 male fittings (also 22mm female filter adapter)
5 port vacuum distribution block anodized blue, fittings included

'96 LS crank pulley
http://www.imagestation.com/my...ulley
7 T-bolt clamps 2.8 - 3.1"
http://www.imagestation.com/my...ility
Anodized AN fittings atleast 4x straight -6, 2x -8, 2x -10, return line, female - male -4 adapter tee etc...
http://www.imagestation.com/my...20FPR


also have fuel evap system with canister hoses and solenoid.
http://www.imagestation.com/my...enoid

'96 and 95 LS intake manifolds bare and mint, some sensors if I have em Ill throw in.
http://www.imagestation.com/my...folds
Beru / TM spark plugs - solid electrode cannot miss spark with these, these will last forever as long as you do not idle too rich.
http://www.imagestation.com/my...acing

also have '96 LS taillights mint
http://www.imagestation.com/my...0mint

AEM power steering underdrive pulley with PS pump, just offer on pulley Ill send pump too. email for pic.

97 ITR radiator with AC fan - email for pic
also have 10 ft braided line in -8, 14inches of -10, and 1ft -8



send reasonable offers plus your location, paypal accepted, checks also but must clear first.

 

bump

 

need any specs or info on this stuff just ask.

 

hey, gippetto, what color is the power steering underdrive pulley???

 

Im very interested in the vacuum manifold. What are the threads in the ports?

How much are you asking for it? no brand name is mentioned so i'm not sure what to ask.

thanks!

 

its blue thanks for asking

 

the port are all 1/8 npt I have enough fittings to mix and match for want you want, the ends are capped off so this one is fedd through the single port on the bottom. say 25 shipped via USPS

 

how much for the p/s pulley?? and your gonna have to drop it off.. lol

 

Done! Whats your paypal address and I'll send the $25.

But first ... does this have any scratches on it? or is it even used?

Thanks mang!

 

??

 

PM sent for the pulley, yeah Ill drop it off.

 

Ill send you details.

 

my paypal is vgutnik@hotmail.com, add three bucks shipping pls.

thanks and regards

 

thanks for quick payment Gpoodle, ill send it out tonite if I can make it through the snow or first thing tomorrow.

 

Thanks man =D
I'll post here when I recieve it.

 

great thats like getting ebay feedback, pls dont make fun of the packing though, dont worry the papertowel everything is wrapped up in was not used. LOL

 

how much for the -8 and -10 fittings & lines?

And will the t-bolts only go to 2.8" ? or will they go to like 2.5"? If so, how much for those?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ScrapinSi &raquo;</TD></TR><TR><TD CLASS="quote">how much for the -8 and -10 fittings & lines?

And will the t-bolts only go to 2.8" ? or will they go to like 2.5"? If so, how much for those? </TD></TR></TABLE>

how many ofeach do you need must see whats left, all line is still there for now.
the tbolt clamps dont have awide range, if you mean 2.5 total no, but with silicone hose over pipe maybe, send me an email and let me know, ill try one out on some 2.5 at home

 

2 -10 fittings, and 2 -8 fittings to go with the lines.