what IC socket do i need to socket my 5 speed p28 ecu (22 or 28 pins)? also if i jsut want to socket and chip my 5 speed p28 ecu do i need to get a different resistor?

 

up

 

come on

 

you need 2 .1uf capasitors one 1k resistor one 28 pin socket and a 74hc373 ic. you can get it all at radio shack

 

where do i place the 2 .1uf capasitors and one 1k resistor?

 

ttt

 

bump

 

bump it up

 

none knows?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by stock93cx &raquo;</TD></TR><TR><TD CLASS="quote">where do i place the 2 .1uf capasitors and one 1k resistor?</TD></TR></TABLE>

.1 uf caps at c52, c51
1-1.2k resistor at r54
and then connect j1 with just a spare piece of wire, cutting this later returns ecu to stock prog

 

open up your ECU... it's all outlined in white, and the spots are marked.

or check out ECUcontrol.com. he has a writeup on how to do it.

 

thanks

 

Let us know how this goes
-PHiZ

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHCwarrior &raquo;</TD></TR><TR><TD CLASS="quote">

.1 uf caps at c52, c51
1-1.2k resistor at r54
and then connect j1 with just a spare piece of wire, cutting this later returns ecu to stock prog</TD></TR></TABLE>

correct i'm going to do it next week. Learn it from http://www.nitroburn.com/pgmfiwiki/ and http://www.ecucontrol.com/ also downloaded the bin files for obd1. So i'm ready

 

can u jsut socket and add a chip to your 5 speed p28? is the capasitors and resistors nescessary?