I recently took off my header heat shield and noticed that i have one the bolts on there broken off (not by me) and was wondering were do i take it to get fixed and how much will it cost.....TIA

 

Did you ever get it out? I just pulled the heat shield off of the exhaust manfold on my gsr swap I just got from IAS and noticed two nuts were missing, one bolt was snapped and there is some sort of sealant all over the gasket. I left Larry Jr a message but I doubt he will do anything about it.

Here's some pics:

 

There a kits to remove broken bolts, you can buy them at Discount autopart.

 

dude those are studs, just take it out and put new studs in

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by civickiller &raquo;</TD></TR><TR><TD CLASS="quote">dude those are studs, just take it out and put new studs in</TD></TR></TABLE>

I thought there was alot more to it??

 

nope. use vice grips to turn it out (Take exhaust manifold off first)

when you remove them, soak in PB blaster first. Then to remove them, put a socket on it and lightly tap with a hammer to break it loose. Apply anti seize when putting them back in.

 

My stud was broken off in the head. Here's a how-to an how I removed it.

https://honda-tech.com/zerothread?id=567450

 

I snapped the top left stud when fitting my JDM 4-1 about 3/4 months ago, at the time i was so pissed after having swapped the stock one on my own that i couldnt be bothered pulling the whole thing off again to replace the stud, so i left it and kept an eye on it to make sure i wasnt getting blow-out and its been fine, i think i'll just leave it till i ever have to take the header off again, its too much bother for the sake of one stud/bolt!