ive seen this done before and i now have one and was hoping that some one could help me with some shortcuts before i dive into this project

any help will be very appreciated

 

See if you can pick up the haynes manual from your local parts store. They should be like $12 or so. I am not sure if your EG plugs will go into the back of the S2K cluster. I have seen this done on another EG here...a while back though. Try a search for that thread...

 

neat project! post some pictures when you got it done id like to see. When i did the wiring for my teg gauge cluster in my eg (ITR dash conversion) i used a volt meter, two wiring diagrams, two wiring harnesses, and some luck and found all the wires. You might want to try the honda dealer and see if you can photocopy a s2k wiring guide.

Good Luck!

liam

 

go to your local dealership and ask to look at the ETM's(electronic troubleshooting manuals) for the 92-95 civic, and also the s2k, then flip to the pages that have the wiring pinouts for the cluster plugs and write down what each wire does.

 

I remember seeing that a while back. I think he got the cluster to work fine except for the speedo. I suppose the S2k uses a different speed sensor, Or different wiring for it. Good luck! It will definately be sweet once you get everything going.

 

I wish you the best of luck, but I really don't know why you would want to do this? Just to be different? I love the way my S2000 gauge cluster looks, but in my S2000 only will it ever look right...but still good luck to you, i hope you get everything to work correctly, but i doubt it..

 

Will look nice when its done.

 

that is correct.. a honda-tech member i think had it all wired in his EG and got everything to work correctly except the speedo and miles on the cluster.. different speedo sensors and resistance in the wire i think was the problem.. i dont think he ever got it to work correctly and it was taken out but im unsure.. do a search its somewhere to be found.. if you do get it to all work properly let us know cause ill swap out my gsr cluster for digital s2k cluster i hope your good w/ electrical wiring and figuring out how things work cause i heard it takes a lot to work

*edit* check out this link https://honda-tech.com/zerothread?id=280763


[Modified by 95CivicEX, 3:16 AM 12/17/2002]

 

anymore help??? does anyone know this person who had it in there eg?

 

anyone helppppppppppppppppppp!!!!!!!!!!!!!