The proper way to perform a Compression Test.
Thread Starter
Trial User
Joined: Oct 2007
Posts: 310
Likes: 0
From: Miami, FL
The proper way to perform a Compression Test.
I am going to run a compression test today and will be following this website.
http://www.c-speedracing.com/h...t.php
My only question is that some people say to remove just the fuse for the FI Injection, and some say to pull the ECU for the ECU. What is the correct way?
Also when your done do you just hand tighten the spark plugs back in.
Anything I should watch out for?
http://www.c-speedracing.com/h...t.php
My only question is that some people say to remove just the fuse for the FI Injection, and some say to pull the ECU for the ECU. What is the correct way?
Also when your done do you just hand tighten the spark plugs back in.
Anything I should watch out for?
Junior Member
Joined: Nov 2006
Posts: 566
Likes: 0
From: Everything gets stolen, PA, US
Re: The proper way to perform a Compression Test. (Razr2)
i dont about about the other stuff u asked, but when u do plugs go snug and then a 1/4 turn.... a good rule of thumb to use is..."snug is tight, tight is broke'' 
Junior Member
Joined: Jan 2007
Posts: 233
Likes: 1
From: Winnipeg, MB, Canada
Re: The proper way to perform a Compression Test. (Razr2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Razr2 »</TD></TR><TR><TD CLASS="quote">
My only question is that some people say to remove just the fuse for the FI Injection, and some say to pull the ECU for the ECU. What is the correct way?
</TD></TR></TABLE>
I didn't read your link, but you are supposed to hold the throttle wide open when cranking for a compression test. On FI cars, doing this cuts out the injectors in case of flooding, so if you do it right it shouldn't matter, but I always pull the fuse for the fuel pump anyways. Also, make sure you do the test on a warm engine, metal expands when warm, and it will affect the results of your test.
My only question is that some people say to remove just the fuse for the FI Injection, and some say to pull the ECU for the ECU. What is the correct way?
</TD></TR></TABLE>
I didn't read your link, but you are supposed to hold the throttle wide open when cranking for a compression test. On FI cars, doing this cuts out the injectors in case of flooding, so if you do it right it shouldn't matter, but I always pull the fuse for the fuel pump anyways. Also, make sure you do the test on a warm engine, metal expands when warm, and it will affect the results of your test.
cute little bastard
Joined: Aug 2004
Posts: 7,086
Likes: 0
From: Sersey Jhore
Re: The proper way to perform a Compression Test. (Razr2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Razr2 »</TD></TR><TR><TD CLASS="quote">
My only question is that some people say to remove just the fuse for the FI Injection, and some say to pull the ECU for the ECU. What is the correct way?
Also when your done do you just hand tighten the spark plugs back in.
Anything I should watch out for?</TD></TR></TABLE>
Its kinda the same thing. I know on the c-speed link it says the fuel injection fuse, but if you look at the cover and the fuse they pull out, its the ECU fuse. So just pull that.
Hand tighten to get the threads on smooth then use the rachet. Don't go crazy but tighten it a lil more than snug.
Just put very lil oil on the compression tester so it doesn't get stuck in the motor.
My only question is that some people say to remove just the fuse for the FI Injection, and some say to pull the ECU for the ECU. What is the correct way?
Also when your done do you just hand tighten the spark plugs back in.
Anything I should watch out for?</TD></TR></TABLE>
Its kinda the same thing. I know on the c-speed link it says the fuel injection fuse, but if you look at the cover and the fuse they pull out, its the ECU fuse. So just pull that.
Hand tighten to get the threads on smooth then use the rachet. Don't go crazy but tighten it a lil more than snug.
Just put very lil oil on the compression tester so it doesn't get stuck in the motor.
Thread
Thread Starter
Forum
Replies
Last Post
