ok guys, I have a 1998 Integra GSR and I am thinking about putting a Type R wing on it. How do you take the old wind off, and can you do it yourself or do you have to take it somewhere to get it done?
Michelle

 

You unbolt it and disconnect the harness. There is a third bolt on the driver's side. The ITR wing will not cover the extra holes for the wiring harness on the GSR wing.

Sear for "ITR wing" or "wing" in the archived Integra forum. There are many topics on this.

 

Yeah, so that hole will have to be filled, so unless you know what and how to do it, best leave it to a body shop or something to do it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Exeed &raquo;</TD></TR><TR><TD CLASS="quote">Yeah, so that hole will have to be filled, so unless you know what and how to do it, best leave it to a body shop or something to do it. </TD></TR></TABLE>

Why pay someone to do it when you can just buy a plug and plug it up. Unless you want it to dissapear then you would fill it...

 

of if you put a type-r style wing with LED, no need for body filler since the spoiler will use all the same holes as your factory

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by be.twenty &raquo;</TD></TR><TR><TD CLASS="quote">of if you put a type-r style wing with LED, no need for body filler since the spoiler will use all the same holes as your factory</TD></TR></TABLE>either that or plug it up with a sticker or some sort of plug and def buy the sponge gasket from here: http://www.barancoacuraparts.c...dIrno=

itll provide a better fit for the wing and wont have vibrations coming from the hatch/wing... post pics when done

 

 

thanks everyone!

 

its very easy bro.... took me 10 min to get everything done!

p.s. now I came back to wingless........

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TYPERRER &raquo;</TD></TR><TR><TD CLASS="quote">its very easy bro.... took me 10 min to get everything done!

p.s. now I came back to wingless........</TD></TR></TABLE>
also wingless at the moment... i have a CF ITR wing waiting to be installed... but first the body shop has to make the body look perfect again

 

just to clarify the type r wing has no led lights on them right?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98GSRDC2 &raquo;</TD></TR><TR><TD CLASS="quote">just to clarify the type r wing has no led lights on them right?</TD></TR></TABLE>

so truth

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98GSRDC2 &raquo;</TD></TR><TR><TD CLASS="quote">just to clarify the type r wing has no led lights on them right?</TD></TR></TABLE>

some truth to that... all oem USDM ITR wings have no lights on them... some aftermarket ones do and Ive only seen one JDM ITR wing with a installed factory brake light...

 

make sure its not a four door integra type r wing, it will be too wide.

 

The holes only partially show. I don't know what color your car is but for mine I just covered the holes with a circular vinyl sticker (electrical tape works too) and it looked fine; no one ever noticed.

 

I used electrical tape the first time around as the wing covers more than half of the hole.

Current car, the previous owner had professionaly filled in so it was wingless, I had to drill out the mount holes again