I am in the process of installing an H22a4 in my 92 Lude Si 4ws and have run into an issue with the coil. The engine harness I am using is from a 95 Si and the coil plug doesn't reach. So I unmounted the coil and it is just resting in the bay for now (just to get it started). Where does it mount on the 4th gen A1? The coils are swapable correct? The plug fit right in so I am assuming they are. Pics would be great. Thanks

 

 

buy an aftermarket Blaster SS coil for like 35 bucks......

 

I want to stay with stock. Thanks though.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92blkJDMh22 &raquo;</TD></TR><TR><TD CLASS="quote">buy an aftermarket Blaster SS coil for like 35 bucks......</TD></TR></TABLE>

Yes, and that will last about 35 days.

Do you have a pic LudeFanatic?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hawkze_2.3 &raquo;</TD></TR><TR><TD CLASS="quote">

Yes, and that will last about 35 days.

Do you have a pic LudeFanatic?</TD></TR></TABLE>

so true, many people are having issues with Blaster/MSD stuff on these boards.
Isnt the h23 and h22 coil interchangeable?

 

First pic is its stock location.
Next are a few pics of what I did with it.

 

Holy crap, you had to mount it down there?! I'm sure you could trim the wire harness cover or some of the tape and pull that plug further up...

 

There is more wire there than that, but that was the only place i could find to bolt it to that it would reach.

Yea I may just cut the harness open a little (good thinking)

Where do the 4th gens mount?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LudeFanatic &raquo;</TD></TR><TR><TD CLASS="quote">

Where do the 4th gens mount?</TD></TR></TABLE>

My H23 has it vertically next to the distributor, but you have a VTEC solenoid there...4G H22 probably just has a different bracket.

 

Pics of H23 coil mount--

 

Cool thanks, now if someone could post a pic of the 4th Gen H22a mounting position that would be fantastic.

Thanks everyone.

 

it goes right next to the the tranny mount. between the tranny mount and dizzy. i know becuz im doin the h22a swap with an h23a harness, my dizzy has an internal coil lol so now i gotta get a dizzy and external coil. but yea right where its at is where it goes.now all u gotta do is wire in your VTEC

 

I am gonna run 500 miles without VTEC. Clutch breakin etc..

 

Does this look like the coil and BRACKET for the H22a?


http://cgi.ebay.com/ebaymotors...%3AIT

 

Anyone?