is it possible to get the rear four door handles and put them on the front of my dc4 and if anyone has an pics that would be sweet thanks

 

yes it is possible. I've seen on h-t in the appearance/cosmetic forum. I've thought about doing it too, just haven't gotten around to it

 

yep just got my handles in today and doing the swap this weekend.

 

sweet show pics and the how too i want to do it i am going to try to get some soon keep my updated man. and also are you putting in an alarm so you can lock it and **** like that or do you already have an alarm. b/c if i do it i will have to get an alarm. thanks
caleb

 

hey i kno this link is based off the G2's (90-93) but its worth a shot


http://www.g2ic.com/tegtips/exterior/12.html


Good luck

 

haha. i was thinking about doing that. the only drawback is if you're battery/ remote dies, you have to climb through the trunk. looks very clean though..

 

https://honda-tech.com/zerothread?id=1343557

this is what im going off of, also using TI for panel removal.
i have a factory alarm already.

 

i have a set oh handles im jsut waiting to put them in to many other things to do when i get my bumper repainter ill get them done as well clean cheap mod tho'

 

how hard is it to install the oem alarm because i want one but i dont want to get a shitty aftermarket one but idont kno how much it will cost to get and put in, i was thinking about door poppers but then i thought it would be way to rice and there would be no point but anywho i need to get the alarm first and hook it up before i switch the handles so i have some way of locking it

 

In the link that was posted, when he said "this is the rod you should remove so theives cant get in" will that effect the way the alarm unlocks the doors?

 

that is what i was thinking

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMfrontedLS &raquo;</TD></TR><TR><TD CLASS="quote">In the link that was posted, when he said "this is the rod you should remove so theives cant get in" will that effect the way the alarm unlocks the doors?</TD></TR></TABLE>

there's no way to stop someone from breaking into your car. it they won't be able to open it through the handle, i'm sure that they'd just break the window...especially in san diego.


theives are pathetic

 

i put on a set of 4dr rear outter handles on my 2dr gsr 3 years ago....still have them on there. I always worry that I'm going to lose my remote for my alarm and I'll have to climb through my trunk to get in the car! LOL Let me see if i have any pics...

 

sorry, dont have any close ups...but i'll try to snap some closer pics tomorrow if i remember

 

ok im gonna do just a little write up on this since its not my theard.

first look over this if never taken apart door panel.
http://www.team-integra.net/se...D=591

after you got that done we start on the door handle

there is 2 10mm bolts that hold up the handle, i found that a swival socket helps
one can be taken off with window up and the other with the window down. ( so keep your panel near by to hook it up)

after that unplug the wire that you see running from the handle, its toward the bottom of the door.

now take some niddle nose pilers and prop off both levers that connect to the handle,
you should be able to take out the whole handle with some force and turning.

I havent figured a way to take out the smaller lever (the one that theifs use to brake in and also the one you want to get rid of) so if someone can let us now that would be great, thanks.

Take the DB8 handle and reconnect the bigger lever, check to make sure everything works. i found that my doors dont Lock with alarm unless the doors are closed.

now bolt up the 2 10mm bolts, recheck everything to make sure it works and put the panel back on in reverse. And enjoy the new look

heres some pics from after the install, couldnt wait till weekend

 

thanks for the pics and the write up it helped, now i kno how to take the door card off. i am going to my friends house who has a 4 door gsr for junk and i will take the door handles off and find an oem or some thing just as good alarm for cheap if i can. thanks
caleb

 

pimp

 

bump for info on taking the whole rod out.
lower portion

 

Too bad they didn't make 4 doors in paradise blue pearl. That way I wouldn't have to get them painted

 

too bad the ones i am getting are purple and my car is red, but i dont care b/c i am going to do a complete color change over to grey or black. not sure yet.
lets get some help on the rods

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMfrontedLS &raquo;</TD></TR><TR><TD CLASS="quote">In the link that was posted, when he said "this is the rod you should remove so theives cant get in" will that effect the way the alarm unlocks the doors?</TD></TR></TABLE>

Will NOT affect the unlocking of the doors. Just eliminates one connection that sends signal to the actuator.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 00IntegrAllmotoR &raquo;</TD></TR><TR><TD CLASS="quote">bump for info on taking the whole rod out.
lower portion</TD></TR></TABLE>

<U>These directions are assuming you already have the door panel and Outer Handle already removed... </U>

First, unscrew the 2 screws that hold the interior door handle in place.
Disconnect the 2 rods on the handle itself.
Disconnect the connector for the door lock actuator (2 pin plug, on the latch side of the door)
Unscrew the 3 screws that hold the latch in place (open your door, look on the side, 3 gold screws, BIG Philips head.)
Pull and maneuver the latch assembly and rods out.
Disconnect the lower rod from the latch, reinstallation is reverse of the removal procedure!

 

Hey, why don't you go put out fire's instead of installing door handles at work. Lazy ***.

HAHA looks good bro.

 

^^^ lolololol i was off duty