Honda-Tech - Honda Forum Discussion
0 2020/05/17 20:04:15
0 2020/05/17 20:03:12
0 2020/05/17 19:50:13
0 2020/05/17 19:49:06
0 2020/05/16 23:02:06
0 2020/05/16 23:00:33
0 2020/05/16 16:40:24
0 2020/05/16 16:39:53
0 2020/04/06 20:03:50
0 2020/04/06 20:03:11
0 2020/04/06 20:02:45
0 2020/04/06 20:02:26
0 2020/04/06 20:01:51
0 2020/04/06 20:01:24
0 2020/02/17 20:09:49
0 2020/02/17 20:09:36
0 2020/02/17 20:09:27
0 2020/02/17 20:09:17
Plenty of slack for connecting to turbo.
Plenty of slack for connecting to turbo.
0 2020/02/17 19:59:39
Stainless bolts and clamps.
Stainless bolts and clamps.
0 2020/02/17 19:59:26
0 2020/02/17 19:59:16
Capped the end of the turbo oil feed for now, but this allowed installing now with intake manifold off.
Capped the end of the turbo oil feed for now, but this allowed installing now with intake manifold off.
0 2020/02/17 19:59:07
New Ktuned clutch slave cylinder, mounted with new stainless hardware. Used a Chase Bays clutch line, note the hose end is oem style and WONT fit the Ktuned slave 3an fitting. Leanred that the hard way, had to do some back and forth shilping and pay to have hose end changed which cost another 50% over base price of clutch line. Lesson learned.
New Ktuned clutch slave cylinder, mounted with new stainless hardware. Used a Chase Bays clutch line, note the hose end is oem style and WONT fit the Ktuned slave 3an fitting. Leanred that the hard way, had to do some back and forth shilping and pay to have hose end changed which cost another 50% over base price of clutch line. Lesson learned.
0 2020/02/17 19:58:55
New OEM S2000 Clutch master cylinder. Spacer is too thick.
New OEM S2000 Clutch master cylinder. Spacer is too thick.
0 2020/02/17 19:58:47
As you can see, the JB Tuned spacer is too thick, which doesnt allow enough threads to engage on the 2 bolts. So hopefully JB Tuned will send another one out thats about 1/4" thinner or Ill need to go to the machine shop and spend more money.
As you can see, the JB Tuned spacer is too thick, which doesnt allow enough threads to engage on the 2 bolts. So hopefully JB Tuned will send another one out thats about 1/4" thinner or Ill need to go to the machine shop and spend more money.
0 2020/02/17 19:58:40
Added some random stainless hardware, mounted the powder coated latch back to the rear hatch.
Added some random stainless hardware, mounted the powder coated latch back to the rear hatch.
0 2020/02/17 19:58:33
0 2020/02/17 19:53:28
0 2020/02/17 19:53:18
0 2020/02/17 19:53:10
0 2020/02/17 19:53:02
Tight fitment, had to trim radiator and bend radistor edge back.
Tight fitment, had to trim radiator and bend radistor edge back.
0 2020/02/17 19:52:55
0 2020/02/17 19:50:52
0 2020/02/17 19:50:46
0 2020/02/17 19:50:38
0 2020/02/17 19:50:31
0 2020/02/17 19:50:20
0 2020/02/17 19:42:22
0 2020/02/17 19:41:50
0 2020/02/17 19:41:09
0 2020/02/17 19:40:34