Honda-Tech - Honda Forum Discussion
0 2023/04/12 16:54:32
0 2023/04/12 16:54:40
0 2023/04/12 16:54:47
0 2023/04/12 16:57:17
0 2023/04/12 16:57:24
0 2023/04/12 16:57:30
0 2023/04/12 16:57:38
0 2023/04/12 16:57:46
0 2023/04/12 17:01:38
Victory!
Victory!
0 2023/04/12 17:01:49
I heated the oven to 240F and then placed the housing in for 10 minutes. That got the adhesive softened up, but I put the housing back in for another 10 minutes and then I was able to separate the glass from the plastic.
I heated the oven to 240F and then placed the housing in for 10 minutes. That got the adhesive softened up, but I put the housing back in for another 10 minutes and then I was able to separate the glass from the plastic.
0 2023/04/12 17:01:59
0 2023/04/12 17:02:07
0 2023/04/12 17:02:19
I removed the city light before baking.
I removed the city light before baking.
0 2023/04/12 17:02:29
The housings shipped w/ a protective film - nice!
The housings shipped w/ a protective film - nice!
0 2023/04/12 17:02:40
I removed the rubber boot and 4 clips. It turns out there are 5 clips!
I removed the rubber boot and 4 clips. It turns out there are 5 clips!
0 2023/04/12 17:05:31
Next - remove this light shield.
Next - remove this light shield.
0 2023/04/12 17:20:20
Separate!
Separate!
0 2023/04/12 17:20:31
These screws take forever. I should have used the the drill.
These screws take forever. I should have used the the drill.
0 2023/04/12 17:20:41
These 2 pieces must separate.
These 2 pieces must separate.
0 2023/04/12 17:20:52
You can see the back of the reflector bowl, where the projector will mount, here:
You can see the back of the reflector bowl, where the projector will mount, here:
0 2023/04/12 17:21:01
Now we have a bare reflector!
Now we have a bare reflector!
0 2023/04/12 17:33:15
Shield and bulb holder unscrew from the back:
Shield and bulb holder unscrew from the back:
0 2023/04/12 17:33:31
This shield is in the way of the projector.
This shield is in the way of the projector.
0 2023/04/12 17:33:40
Tighten lock ring!
Tighten lock ring!
0 2023/04/12 17:36:38
Place H4 adapter.
Place H4 adapter.
0 2023/04/12 17:36:47
Make sure gasket looks good.
Make sure gasket looks good.
0 2023/04/12 17:36:55
I ran the high/low wires through the city light opening in the reflector bowl.
I ran the high/low wires through the city light opening in the reflector bowl.
0 2023/04/12 17:37:02
H4 gasket goes on.
H4 gasket goes on.
0 2023/04/12 17:37:11
The Moto Holder and lock ring need to come off.
The Moto Holder and lock ring need to come off.
0 2023/04/12 17:37:19
All the pieces:
All the pieces:
0 2023/04/12 17:37:31
0 2023/04/12 17:54:44
0 2023/04/17 07:52:36
0 2023/04/17 07:52:46
0 2023/04/17 07:52:57
How to use these adjusting screws for the reflector bowl?
How to use these adjusting screws for the reflector bowl?
0 2023/04/17 07:53:06
I thought these slots were how you adjust the headlights.
I thought these slots were how you adjust the headlights.
0 2023/04/18 11:13:20
0 2023/04/18 11:26:45
Better lighting, and showing the length of the leads off the halo.
Better lighting, and showing the length of the leads off the halo.
0 2023/04/28 07:50:18
Detail of the connector between the halo and relay.
Detail of the connector between the halo and relay.
0 2023/04/28 07:50:25