Honda-Tech - Honda Forum Discussion
0 2019/10/07 23:06:16
0 2019/10/07 23:06:20
0 2019/10/07 23:06:26
0 2019/10/07 23:06:36
0 2019/10/07 23:06:46
0 2019/10/07 23:06:56
0 2019/10/07 23:07:07
0 2019/10/07 23:07:18
0 2019/10/07 23:07:29
0 2019/10/07 23:07:38
0 2019/10/07 23:07:51
0 2019/10/07 23:08:00
0 2019/10/07 23:08:05
0 2019/10/07 23:08:11
0 2019/10/07 23:08:20
0 2019/10/07 23:08:30
It sits waiting for action.
It sits waiting for action.
0 2019/10/07 23:12:23
Should I put this here? Yes. I was waiting for the bracket to come.
Should I put this here? Yes. I was waiting for the bracket to come.
0 2019/10/07 23:12:34
I love this part. Putting the pan on. After banging head to wall for specs.
I love this part. Putting the pan on. After banging head to wall for specs.
0 2019/10/07 23:12:43
Head is on! ARP head studs torqued to 80 I believed.
Head is on! ARP head studs torqued to 80 I believed.
0 2019/10/07 23:12:53
0 2019/10/07 23:13:02
What could this random stufff be for?
What could this random stufff be for?
0 2019/10/07 23:13:11
Pointer finger pointing at idea, idea for where to mount temp gauge for aem gauge.... *goes and buys 1/8th npt drill bit and tap*
Pointer finger pointing at idea, idea for where to mount temp gauge for aem gauge.... *goes and buys 1/8th npt drill bit and tap*
0 2019/10/07 23:13:20
This water pipe... it ain’t right. Extra bung. Let me use that tilt advantage ey!
This water pipe... it ain’t right. Extra bung. Let me use that tilt advantage ey!
0 2019/10/07 23:13:30
Check out my new plate!
Check out my new plate!
0 2019/10/07 23:13:42
Hondata s300 v3 woo! Did I mentioned? I had accidentally purchased a stolen ecu.. had some weed situation, I contacted the person it was stolen from on my own, offered to give him his stolen stuff.. who am into keep it from him. I sent it, dude didn’t even pay shipping! I asked him for shipping money only after he got it. Ice cold. Anyways This ECU has Boost by gear components installed, and COP hardware.
Hondata s300 v3 woo! Did I mentioned? I had accidentally purchased a stolen ecu.. had some weed situation, I contacted the person it was stolen from on my own, offered to give him his stolen stuff.. who am into keep it from him. I sent it, dude didn’t even pay shipping! I asked him for shipping money only after he got it. Ice cold. Anyways This ECU has Boost by gear components installed, and COP hardware.
0 2019/10/07 23:13:55
Mock up. Check out my heater hoses. I deleted the heater valve, no A/C, don’t need the valve. It made my hose point to the passenger side, and I like this better. :) more stealth. Oh! And I put a block off plug on the side of the head. :)
Mock up. Check out my heater hoses. I deleted the heater valve, no A/C, don’t need the valve. It made my hose point to the passenger side, and I like this better. :) more stealth. Oh! And I put a block off plug on the side of the head. :)
0 2019/10/07 23:14:05
Stealth 4 port Mac valve moutage. I did some super cool crap and 2 factory wire so that went to A/C to wire this. No extra wires coming out of cabin. The wires are soldered into cabin harness looking factory.
Stealth 4 port Mac valve moutage. I did some super cool crap and 2 factory wire so that went to A/C to wire this. No extra wires coming out of cabin. The wires are soldered into cabin harness looking factory.
0 2019/10/07 23:14:10
S2000 master cylinder why not! And an alt wire.
S2000 master cylinder why not! And an alt wire.
0 2019/10/07 23:14:21
This plate needed for the s2000 master cylinder I guess.
This plate needed for the s2000 master cylinder I guess.
0 2019/10/07 23:14:30
Look at this coool thing! I rotated the brake booster so that the vacuum port was at the bottom, hidden. Now the hose is very short. The check valve is still in place.
Look at this coool thing! I rotated the brake booster so that the vacuum port was at the bottom, hidden. Now the hose is very short. The check valve is still in place.
0 2019/10/09 21:35:44
I mounted my HID ballasts like this. Come to find out it gets in the way of the factory fogs... later find also the intercooler piping gets in the way too! For now I am not running fogs. Later I’ll go backdoor intercooler so I can fit my fogs, and keep my ballasts in this neat location.
I mounted my HID ballasts like this. Come to find out it gets in the way of the factory fogs... later find also the intercooler piping gets in the way too! For now I am not running fogs. Later I’ll go backdoor intercooler so I can fit my fogs, and keep my ballasts in this neat location.
0 2019/10/09 21:35:57
You ever seen a headlight wire harness tuck so cleeeaan?
You ever seen a headlight wire harness tuck so cleeeaan?
0 2019/10/09 21:36:08
I make the brake light wires go out of the same hole where the wiper motor wires used to go into. Used the factory grommet.
I make the brake light wires go out of the same hole where the wiper motor wires used to go into. Used the factory grommet.
0 2019/10/09 21:36:18
Everything felt trashed. So much wiring. My neck hurt.
Everything felt trashed. So much wiring. My neck hurt.
0 2019/10/09 21:39:16
After much thought.. bought this pillar thing. Tried to JB weld it. Wanted to avoid screws. The JB weld broke free when I was trying to do a final install. I ended up using factory screws.
After much thought.. bought this pillar thing. Tried to JB weld it. Wanted to avoid screws. The JB weld broke free when I was trying to do a final install. I ended up using factory screws.
0 2019/10/09 21:39:26
I made this dope little sub harness (2 of them) for the headlights and I’m proud of it!
I made this dope little sub harness (2 of them) for the headlights and I’m proud of it!
0 2019/10/09 21:39:36
Piping doesn’t fit well because the damn skunk2 gods decided they needed to be different and angle their TB.
Piping doesn’t fit well because the damn skunk2 gods decided they needed to be different and angle their TB.
0 2019/10/09 21:39:47
Decided I was going to clean up/modify my engine harness. Flat overwhelmed for a bit.
Decided I was going to clean up/modify my engine harness. Flat overwhelmed for a bit.
0 2019/10/09 21:39:56
Mobile temp vise! Using to put AN hose end fittings on.
Mobile temp vise! Using to put AN hose end fittings on.
0 2019/10/09 21:40:06