Honda-Tech - Honda Forum Discussion
Here are the parts suggested for the driveline rebuild. They are to be used with speedfactory’s adapter/spacer kit.
Here are the parts suggested for the driveline rebuild. They are to be used with speedfactory’s adapter/spacer kit.
0 2020/12/27 21:03:51
When I thought of putting an LSD In the rear I realized I have no clue about that stuff. This image was pulled from a factory Service manual PDF for the wagon, ha!
When I thought of putting an LSD In the rear I realized I have no clue about that stuff. This image was pulled from a factory Service manual PDF for the wagon, ha!
0 2020/12/27 21:03:54
0 2020/12/27 21:16:57
Mfactory LSD for the rear! :) This is the LSD used on a b000 D series transmission.
Mfactory LSD for the rear! :) This is the LSD used on a b000 D series transmission.
0 2020/12/27 21:17:04
Shot of the chewed GSR 3rd gear set.
Shot of the chewed GSR 3rd gear set.
0 2020/12/27 21:17:09
This is the speedfactory I had mentioned. It’s main purpose is to convert from metric to SAE where it’s required.
This is the speedfactory I had mentioned. It’s main purpose is to convert from metric to SAE where it’s required.
0 2020/12/27 21:17:17
0 2020/12/27 21:17:23
I am a lizard person.
I am a lizard person.
0 2020/12/27 21:17:26
Rear diff mounted! I had to cut out a section of the subframe and bang up the floor. The sad part is a spare tire can no longer be mounted due to the floor being banged up to allow for the rear diff to sit in place.
Rear diff mounted! I had to cut out a section of the subframe and bang up the floor. The sad part is a spare tire can no longer be mounted due to the floor being banged up to allow for the rear diff to sit in place.
0 2020/12/27 21:17:31
Insane shaft 500 HP rear axles.
Insane shaft 500 HP rear axles.
0 2020/12/27 21:17:38
Stoptech braided lines and Hawk HPS front/rear pads
Stoptech braided lines and Hawk HPS front/rear pads
0 2020/12/27 21:17:42
Stoptech braided lines and Hawk HPS front/rear pads, Brembo Blanks for front and rear.
Stoptech braided lines and Hawk HPS front/rear pads, Brembo Blanks for front and rear.
0 2020/12/27 21:17:48
0 2020/12/27 21:17:53
Front LSD side bearings (mostly for PN reference)
Front LSD side bearings (mostly for PN reference)
0 2020/12/27 21:17:59
0 2020/12/27 21:18:06
Front LSD! It’s a gearX LSD.
Front LSD! It’s a gearX LSD.
0 2020/12/27 21:18:12
I made this tool to measure bearing preload for the front diff.
I made this tool to measure bearing preload for the front diff.
0 2020/12/27 21:18:18
Snip grind weld.
Snip grind weld.
0 2020/12/27 21:18:25
Much better. :)
Much better. :)
0 2020/12/27 21:18:31
This is WAYY too long.
This is WAYY too long.
0 2020/12/27 21:18:34
Working on figuring out the right shims for the rear diff.
Working on figuring out the right shims for the rear diff.
0 2020/12/27 21:18:37
Some OEM thingss. I replaced the steering rack with an OEM (manual) one after 2-3 bad parts store racks. So you can see some new boots here for that, and misc other goodies.
Some OEM thingss. I replaced the steering rack with an OEM (manual) one after 2-3 bad parts store racks. So you can see some new boots here for that, and misc other goodies.
0 2020/12/27 21:18:43
Working on mocking up so I can weld this bar across which will be a mounting point for the rear diff.
Working on mocking up so I can weld this bar across which will be a mounting point for the rear diff.
0 2020/12/27 21:18:49
I recorded while welding. This falling glob of molten metal.. is why my screen is cracked.
I recorded while welding. This falling glob of molten metal.. is why my screen is cracked.
0 2020/12/27 21:18:56
More good stuff! I’m pretty happy with this brand. These are Japanese made parts and they seem OEM really.
More good stuff! I’m pretty happy with this brand. These are Japanese made parts and they seem OEM really.
0 2020/12/27 21:19:07