Honda-Tech - Honda Forum Discussion
0 2017/10/08 13:12:26
0 2017/10/08 13:12:31
0 2017/10/08 13:12:58
0 2017/10/08 13:13:19
0 2017/10/08 13:13:38
Annd the finished project! Just kidding. This is my friends car. Twinnin.
Annd the finished project! Just kidding. This is my friends car. Twinnin.
0 2017/10/08 13:15:02
Type back in. Engine bay mostly complete. Waiting on new condenser.
Type back in. Engine bay mostly complete. Waiting on new condenser.
0 2017/10/08 13:16:51
Body panels loosely fit, checking out lines I'll have to rework, :( this car has seen atleast 3 deer. One by me. Painter still have small removable parts like mirrors, side skirts, door handles, grill, that's stopping me from going any further with the body. No need to put the bumper on with no grill, no need to put the fenders on when they'll have to come off to wire up the power mirrors, can't put the door panels on because I need the door handles. And such!So I am excited to get that back
Body panels loosely fit, checking out lines I'll have to rework, :( this car has seen atleast 3 deer. One by me. Painter still have small removable parts like mirrors, side skirts, door handles, grill, that's stopping me from going any further with the body. No need to put the bumper on with no grill, no need to put the fenders on when they'll have to come off to wire up the power mirrors, can't put the door panels on because I need the door handles. And such!So I am excited to get that back
0 2017/10/08 13:17:09
0 2017/10/24 19:13:42
5 lug suspension is here. I'm rather pleased with how clean the parts are, and that the trailing arm bushings aren't blown. I'll take these rotors into be turned soon, and get new pads. Just need to get tires ordered and mounted before I can install these, so I can move the car in and out of the garage if needed.
5 lug suspension is here. I'm rather pleased with how clean the parts are, and that the trailing arm bushings aren't blown. I'll take these rotors into be turned soon, and get new pads. Just need to get tires ordered and mounted before I can install these, so I can move the car in and out of the garage if needed.
0 2017/11/16 10:27:34
Got brembo blanks/pads for the rear.
Got brembo blanks/pads for the rear.
0 2017/11/25 16:06:57
Pads for the front. Had the front rotors turned. They are slotted in an odd fashion.
Pads for the front. Had the front rotors turned. They are slotted in an odd fashion.
0 2017/11/25 16:07:19
2 horns is better than one. I’ve been meaning to do this for a while now. It’s sound as hell.
2 horns is better than one. I’ve been meaning to do this for a while now. It’s sound as hell.
0 2017/11/25 16:07:46
Nittos from eBay. Whole car is Ebay built I tell ya.
Nittos from eBay. Whole car is Ebay built I tell ya.
0 2017/11/25 16:08:12
Mock up. Going to buy some new lug nuts soon. Front is all done really. Need rear camber kit to put back wheels on. I sold them to aid in a fast job on a guys car, So I didn’t have to wait for them to come.
Mock up. Going to buy some new lug nuts soon. Front is all done really. Need rear camber kit to put back wheels on. I sold them to aid in a fast job on a guys car, So I didn’t have to wait for them to come.
0 2017/11/25 16:08:36
Mock up. In the air.
Mock up. In the air.
0 2017/11/25 16:08:59
0 2018/01/14 23:31:26
Got weird and installed a second stock horn. Make your ears bleed. But then it got me thinking to install some synconized clean sounding horns. Maybe this is a double posted pic, don’t remember and can’t look back with ease.
Got weird and installed a second stock horn. Make your ears bleed. But then it got me thinking to install some synconized clean sounding horns. Maybe this is a double posted pic, don’t remember and can’t look back with ease.
0 2018/01/14 23:34:56
0 2018/01/14 23:42:43
0 2018/01/14 23:46:24
0 2018/01/14 23:48:41
0 2018/05/30 22:17:07
And here’s a funny I found on the interwebz. Love it.
And here’s a funny I found on the interwebz. Love it.
0 2018/06/18 12:23:27
Here’s most of the turbo kit. Never having turbo’d, my head is almost spinning looking at all of it. Haha. I know once I’m done it’ll all seem simple. Intercooler is coming in the another package tomorrow. I opened it, and I’m pretty sure I’ve been sitting here for 2 hours staring at and playing with it. Need to put it away and go make that money. Ha.
Here’s most of the turbo kit. Never having turbo’d, my head is almost spinning looking at all of it. Haha. I know once I’m done it’ll all seem simple. Intercooler is coming in the another package tomorrow. I opened it, and I’m pretty sure I’ve been sitting here for 2 hours staring at and playing with it. Need to put it away and go make that money. Ha.
0 2018/06/18 12:24:08
So.. this was my daily after the blue car. I put my type r swap in it.
So.. this was my daily after the blue car. I put my type r swap in it.
0 2018/12/12 00:14:12
New things are happening, I am moving to Oregon. I need to drive the car there and turbo build isn’t finish. I rebuild— in the freshest fashion, this b16a. Will he installed in blue car NA as temp, and back up engine.
New things are happening, I am moving to Oregon. I need to drive the car there and turbo build isn’t finish. I rebuild— in the freshest fashion, this b16a. Will he installed in blue car NA as temp, and back up engine.
0 2018/12/12 00:15:59
I used this green flipper car to make some money for blue car. It has a broken off spark plug and was trashed nasty.
I used this green flipper car to make some money for blue car. It has a broken off spark plug and was trashed nasty.
0 2018/12/12 00:19:01
I refreshed the engine entirely, aside from rings and bearings, also converted from gray to tan interior, and manual to electric options.. this pic is where I last saw it. New owner didn’t even test drive or start the car. I used the money from this to..
I refreshed the engine entirely, aside from rings and bearings, also converted from gray to tan interior, and manual to electric options.. this pic is where I last saw it. New owner didn’t even test drive or start the car. I used the money from this to..
0 2018/12/12 00:19:02
Buy this RSX-S! Blown engine. I had to drive like, ohhh.. about 18 hours all together to get it. Was 2000 with price of car and everything else. I bought an 07 civic si engine for 1200 and installed it.
Buy this RSX-S! Blown engine. I had to drive like, ohhh.. about 18 hours all together to get it. Was 2000 with price of car and everything else. I bought an 07 civic si engine for 1200 and installed it.
0 2018/12/12 00:21:21
So now that I have this new RSX.. and no green car flipper profit, I must sell my salvage title 300k mile sedan. I kind of got it for 100 dollars as a pile of shit, see next pic...
So now that I have this new RSX.. and no green car flipper profit, I must sell my salvage title 300k mile sedan. I kind of got it for 100 dollars as a pile of shit, see next pic...
0 2018/12/12 00:23:17
0 2018/12/12 00:25:10
It had a blown clutch and a high mileage d series, and was super Honda boi’d out in the fashion of mistreat. Anyways.. as I said I put my type r in it. I can’t sell it for shit around here.. I put an Si wing, front lip, front grill, wheels, and rear disc brakes (all OEM).. cleaned the interior, all the good stuff... I decided to revert it back to stock and put a fresh z6 in it. And that I did. I sold the car for 2500. It was a great car for me. And now the type r rests here—
It had a blown clutch and a high mileage d series, and was super Honda boi’d out in the fashion of mistreat. Anyways.. as I said I put my type r in it. I can’t sell it for shit around here.. I put an Si wing, front lip, front grill, wheels, and rear disc brakes (all OEM).. cleaned the interior, all the good stuff... I decided to revert it back to stock and put a fresh z6 in it. And that I did. I sold the car for 2500. It was a great car for me. And now the type r rests here—
0 2018/12/12 00:25:11
In my living room. I have some downpayments on it, and when paid in full (2800 for full swap; with b16 trans), it will he gone. It’s been a good 3 years.
In my living room. I have some downpayments on it, and when paid in full (2800 for full swap; with b16 trans), it will he gone. It’s been a good 3 years.
0 2018/12/12 00:28:21
Would ya look at that sign!! Yep, you’re right.
Would ya look at that sign!! Yep, you’re right.
0 2018/12/12 00:33:53
It’s sleeved!
It’s sleeved!
0 2018/12/17 22:21:02
0 2018/12/18 17:22:59
0 2018/12/18 17:23:26
The block is done! Hot tanked, sleeved, bored and honed to fit my pistons, align honed for the arp main studs.
The block is done! Hot tanked, sleeved, bored and honed to fit my pistons, align honed for the arp main studs.
0 2018/12/18 17:26:22
Now I’m getting nervous. It’s getting more real.
Now I’m getting nervous. It’s getting more real.
0 2018/12/18 17:26:49
The block is here! All machine work is done. P2W is set. Align honed due to arp main studs. I’m getting nervous. It’s becoming more real.
The block is here! All machine work is done. P2W is set. Align honed due to arp main studs. I’m getting nervous. It’s becoming more real.
0 2018/12/18 17:27:59