Hey guys well I recently bought a Mfactory catch can for my B16a turbo build (300whp). And after doing some research I decided to add a Moroso Filter.

My question is can I just cut up the catch can at the top portion add a plate welt it there then cut out and weld a 3/8" tube for the filter to fit onto.

Also I will be venting my valve cover I was thinking of doing a single -10AN in the front of the valve cover. Then drilling out one of the nipple of the catch can and weld a -10 bung and conect a SS line from the VC to the CC. And I would use the second nipple to the factory air outlet just next to the oil cap. With normal Clear braided hose from home depot.

Would it make a diference if I let my PCV valve plugged since it runs to a vacuum hole in my intake manifold.

Any help and information will be greatly apreciated.

Jon

 

any body knows if it can be done?