millz

So i bought a coupe and found out more problems with them car. Any help on what i can do?

Engine Bay
Bad cut under, you really don't wanna see
Floor Panel Bump
Floor Panel Bump 2

SovXietday

That car is ****ed. Royally. Even after a long time on a frame straightening rack I don't see that car ever being straight again.

moxynoff111

Its hard to tell from the pictures what components are damaged. There might be enough adjustment in the suspension components to get it driving straight. You should really plan on fixing all the damage. There is always the possibility of the damage causing excessive wear and breaking causing the driver to lose control the vehicle.

k24em2

I hope you didn't pay very much for it.

wantboost

iTrader: (2)

the junkyard is the only place that thing should go

millz

The frame isnt really bad, just the front was behind the headlights was damaged and there was about a 4 inch rust hole through and through

Frame wise is straight i just need the holes filled and radiator support fixed

paid 300 for it basically

i got the radiator support coming in this weekend, i wanted the front frame rust hole covered and the shifter hole that was covered neated up

k24em2

Dude it's probably worth more than 300 as scrap right now

SovXietday

Then why are the front floors so distorted? That's what's making me thing there's a lot more damage than what you're aware of.

millz

floor panels i fixed, engine bay area behind drive headlight fixed, now i just need the big cut holes covered

SQ is the SQUAD

you need better pictures of the hole area. the floors just looks like someone jacked it in the wrong place. what year a model is the car?