i have seen people build turbo manifolds, but not too many headers......does anyone have pics of their header making skill

 

mazuri super has some IS300 headers they fabbed from thin walled stainless... i guess most of the guys on here are into fabbing high performance **** like turbo setups, not many fabricators making headers because face it, it'd cost you less to buy a premade header for your all motor car anyway... unless you want a special design i guess, but that'd be just silly :silly:

 

actually , an NA header would most likely cost you MORE than a TURBO manifold (more material, more time, more complicated)..

 

yea i want to get start with all motor before i go turbo later on, like the anr header looks so nice

 

here are just a couple headers that we built.

 

last pic is crazy looking got any pics of it off the car

 

no i dont, its actually not even a stepped tri-y beings that is the crappy motor, this one is just mild steel coated. the good motor has a stepped ss tri-y and is actually on the engine dyno as we speak

 

that second pic looks like the exhaust pulses need directions to find the exit.... the first one looks naaiiice but the second... not so matchh

 

Im workin on a header thats kinda like a mixture between an smsp and a rage header.. ill post pics when i fix my camera.. and when its done ill see how much power it makes

 

we were happy with the numbers that the header put out. like i mentioned in my other post, the better motor has a ss purged tri-y step header that made more impressive numbers

 

Here are a few pics of my headers.

Sr20ve



K Series

 

very nice^^^

 

it really is easyer and cheaper to buy a pre-made header from a company, concidering each 90 degree 1-5/8" o.d. tube cost close to $40 plus flanges, then labor

 

when it comes to v8 headers, pre-made headers are not equal at all. we have not seen one pair of pre-made equal length headers actually. most of the runners usually differ by no less than 4 inches.

 

i figured you would post in hear.

sick looking headers i saw one of your b-series 4-1's today looks good.