accordking

I say the mods should deduct points for him to post this crap.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChopSuey &raquo;</TD></TR><TR><TD CLASS="quote">accordking

I say the mods should deduct points for him to post this crap. </TD></TR></TABLE>

are you talking about me? and if so, who the **** are you! There, now that should get some points taken off my rating. I have every right to post my experience with any given topic, good or bad. Noob.

 

oh, and btw, mods lock this "crap"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">

are you talking about me? and if so, who the **** are you! There, now that should get some points taken off my rating. I have every right to post my experience with any given topic, good or bad. Noob. </TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">oh, and btw, mods lock this "crap"</TD></TR></TABLE> I rest my case.

 

lol, this thread is the best "E-asskicking" I have ever seen.

he deserves it. I feel for the customers who he owes so much to.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by accordking &raquo;</TD></TR><TR><TD CLASS="quote">oh, and btw, mods lock this "crap"</TD></TR></TABLE>

No, I don't think so.

 

Mike I think your beginning to get immature about this matter because I didnt end up cutting the flanges for you and sent the gaskets back.

Obviously there is no more cases to be handled and this has just turned into a flame war the past month. Just delete it.

 

It has nothing to do with your cutting my flanges or not, it has to do with the amount of BS you've handed out to people over time who have ordered for you and had to play waiting games hoping to get their stuff or money. For that reason alone your not going to just get a new start on life and have a negative thread that shows past problems "Locked or Deleted".

In fact I PM'd you about this further.

 

I dont see how im getting a "new life".. simply because the thread is deleted or locked doesnt mean that people forget about it. Im sure if anyone has looked into the welding/fab forum they also looked at this post.

The matter is long over, and problems were corrected. I belive you said this thread would be locked or deleted when the matters were resolved... why the change of mind?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExploitedRacing &raquo;</TD></TR><TR><TD CLASS="quote">I dont see how im getting a "new life"..</TD></TR></TABLE>

It's called new users that join and know nothing about your track record that obviously hasn't been the greatest. People that are users now and have seen this thread know about past experience, that's a given. BUT, if this thread was locked or deleted, there wouldn't be a way to go search for it when a new potential customer may be interested in your products. This topic staying at the top or not being deleted allows future buyers to see what kind of seller they are dealing with and what occurances have happened in the past, good or bad.

 

I dont see this being done with any other companys that have had problems on the H-T Boards.

Not to mention like i said before Mike DID say to me this thread would be locked or deleted once all problems were gone...

all problems are gone...

why isnt it locked or deleted like he said it would be?

 

Unstickied, but Not Locked or Deleted.

Also Please Note that Exploited Racing is No longer allowed to sell or advertise on Honda-Tech. If anyone sees differently from this date on please notify me.
Thank You.

 

I NEVER said it would be deleted, possibly locked but I never said I would definately lock it. It's unstickied and that is about all you will get. Be happy I didn't Ban you from the site.

 

DAMN. All i know is that when this was all occuring, I e-mailed him i regards to one(1) single flange and he said he could fil my order in a decent amount of time. I didn't think anything of this situation... Within 1.5 weeks i had my flange like promised. Soryy for everybody else that got messed. My experience was pleasant.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ExploitedRacing &raquo;</TD></TR><TR><TD CLASS="quote">I dont see this being done with any other companys that have had problems on the H-T Boards.

Not to mention like i said before Mike DID say to me this thread would be locked or deleted once all problems were gone...

all problems are gone...

why isnt it locked or deleted like he said it would be?</TD></TR></TABLE>

Do a search on any company that sell on honda-tech, I bet you will not get more than 3 thread that expressed problems with them.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ChopSuey &raquo;</TD></TR><TR><TD CLASS="quote">accordking

I say the mods should deduct points for him to post this crap. </TD></TR></TABLE>Or give them to me. I STILL don't know why I am at 98%

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by parasonic &raquo;</TD></TR><TR><TD CLASS="quote">Or give them to me. I STILL don't know why I am at 98%</TD></TR></TABLE>I agree.

 

man i wouldve just given up and changed my company name, phone number, and moved onto a different board, lol

 

I would like to say I bought flanges from him like 2 weeks ago and everything went just the way it should of,He even sent me 4 of the wrong flanges and he sent new ones out right away.The shipping was even super fast everything was sent out the same day and I was supplied with the tracking info.

So for everyone still flaming him,he is obviously changing his ways most company's in his position would of just went out of business and everyone would of been beat for there money. But he took care of it,unlike some company's do,so to still be here after the beating he took and the hell he put himself through on here and any where else.That shows that he is a pretty stand up guy,at least in my book.


Modified by dragline at 9:56 AM 5/23/2005

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H-R Pro Welding &raquo;</TD></TR><TR><TD CLASS="quote">"Exploited Racing from what I can tell is a one man business. He's somewhere in his early 20's and does have his own shop/garage. He does have other jobs which seem to be his priority. His customer service, judging from the feedback of people on here, seems to be mediocre at best. He pushes products that aren't even made yet and expects people to wait while he finishes them on his free time.


Steven A. Hinterberg · Phone: 414-774-3506
908 S 91st St
Milwaukee, WI 53214

Admin Name........... Steven Hinterberg
Admin Address........ 908 s 91 st
Admin Address........
Admin Address........ West Allis
Admin Address........ 53214
Admin Address........ WI
Admin Address........ UNITED STATES
Admin Email.......... gsxtboost@hotmail.com
Admin Phone.......... +1.4147743506"

As for that information.... that is VERY old and no longer valid so please dont use it.

IF you dont know something for sure DONT POST IT. DONT be a stupid ***, seriously.
.


Modified by ExploitedRacing at 1:49 PM 3/2/2005</TD></TR></TABLE>

Up to show an old faces new name!

 

haha, it's that easy to start over...

 

I remember when i ordered flanges WAYYY back in the day, took 2 months to get them and when i got them they didn't fit a b series head. He insured me they fit and that chances are i didn't have a B series hahaha

 

Exploited Racing and H-R Pro Welding = NOT the same company... I only work part time for H-R

 

I'm so confused

 

basically there saying that the company i work for... is the same company i used to own.