Unjockable

i recently took out the o2 sensor from my test pipe and there was white **** all over it. it wiped off easily with a rag. is this a bad thing?

I Want An Si

quit whacking off in your exhaust!!!

but seriously.... i believe it means youre running lean

preluder

ahahahahahahahahaha

Unjockable

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by d16a &raquo;</TD></TR><TR><TD CLASS="quote">quit whacking off in your exhaust!!!

but seriously.... i believe it means youre running lean</TD></TR></TABLE>

lol...anyway i can stop it from running lean? i know i dont want to run lean or rich but is running lean better then running rich?

poison

No, it's not good to run either. You want to run stoich. Running lean can cause back fire and running rich can foul up and make O2 sensors/spark plugs go bad.

Unjockable

what's the first thing i should do to make my car run stoich?

ScottEK

Was the white stuff on the sensor or the threads.

New o2 sensors have anti-seeze coated on the threads.

Unjockable

it's on the sensor.

Quik Chris

How about this.... instead of making asumptions off the O2 sensor, check your plugs to see if they're white too. That will tell you if you're lean or not. O2 sensors aren't typically used to make sure the car is running the propper A/F ratio-- partly beacause they're inside the cat which gets into the 1500-2000°F range, and alters the chemical proporties of the exhaust.

BI8B

i'm having the same problem

Unjockable

i already check the spark plugs before that and it's also white...

mmuller

definetely lean, whats your setup?

Unjockable

i have a 96 hatch with a LS motor. Basic bolt ons for now. intake, header, straight pipe, exhaust.